added a checklist for software distribution

distribution/checklist.txt

@@ -0,0 +1,35 @@
+Distribution Checklist
+
+Checklist to be filled out before software is distributed.
+This is to ensure that at least the most important GUI functions
+work properly.
+During test: Don't use the 'experimental mode'!
+
+General
+[ ] build a MS-JK-FF with diagonal wires, use Copy&Paste, 'L' and 'CTRL-S' shortcuts
+[ ] copy test case from the example (JK-MS.dig) to the created circuit
+[ ] run tests
+[ ] show test result in the timing diagram
+[ ] undo and redo complete build
+
+74xx
+[ ] number the pins
+[ ] remove all pin numbers
+[ ] adding and removing prefixes
+[ ] build a xor with two 7400
+
+Analysis
+[ ] create circuit from the default expression
+[ ] analyse circuit, result should to be "Y=B*C"
+
+Truth Tables
+[ ] create truth table of "two out of three" function, show KV map
+[ ] create truth table of "4 input parity" function, show KV map
+[ ] create 4 bit counter, build circuit with JK-FFs, check if it's running
+[ ] build same circuit with D-FFs, check if it's running
+[ ] create 8 bit up/down counter and start "ATF1502->TT2/JED" export. (Needs WinCupl to be installed!)
+
+Remote Interface
+[ ] start "Conways Game of Live" (Conway.asm) via the assembler GUI in the processor (Processor.dig).
+[ ] use "run to break" a few times
+[ ] start debugger, step at least through a call instruction