From 4f17f1aedf575af78ae683b0e69fac4b0b24f014 Mon Sep 17 00:00:00 2001 From: hneemann Date: Sat, 20 Jul 2019 15:16:43 +0200 Subject: [PATCH] updated spanish translation --- src/main/resources/lang/lang_es.xml | 48 +++++++++++++++++++++++ src/main/resources/lang/lang_es_ref.xml | 52 +++++++++++++++++++++++++ 2 files changed, 100 insertions(+) diff --git a/src/main/resources/lang/lang_es.xml b/src/main/resources/lang/lang_es.xml index 587253675..62372e7ce 100644 --- a/src/main/resources/lang/lang_es.xml +++ b/src/main/resources/lang/lang_es.xml @@ -1723,4 +1723,52 @@ Por tanto, la señal 'D_out' estará también disponible para chequear el valor Error al leer la configuración de la toolchain {0} ¡El comando "{0}" ha empezado! ¡El procesado puede llevar un tiempo! ¡El comando "{0}" ha sido completado! + Hay una entrada o una salida sin nombre + La señal "{0}" no es válida o se ha usado varias veces + Error al sustituir componentes para el análisis. + Error en la evaluación del código genérico del circuito. Código {1} en el Componente: {0} + Error al analizar código genérico + Parametrización genérica + Declaraciones hechas para generar un circuito + El circuito es genérico + Permite crear un circuito genérico + Muestra el tutorial en el arranque + Habilita el tutorial + Entradas + Bits + Bits de dirección + Tutorial + A continuación, podrás diseñar tu primer circuito tras un breve tutorial: + + Primero, pon una entrada en el circuito. Encontrarás las entradas en el menú Componentes▸Entrada-Salida + Ahora, añade una segunda entrada al circuito. También puedes hacer clic sobre la entrada que ha aparecido en la barra de herramientas. + + Es mejor colocar la segunda entrada a dos espacios de rejilla debajo de la primera. + Puedes mover el circuito presionando el botón derecho del ratón. + Haciendo clic sobre las entradas puedes moverlas. + A continuación vamos a insertar una puerta "OR Exclusiva". + Puedes encontrarla en el menú Componentes▸Lógica. + Coloca el componente a dos espacios de rejilla a la derecha de las entradas. + El último componente que vamos a insertar es una salida. + Colócala a dos espacios de rejilla a la derecha de la puerta "OR Exclusiva". + Para completar el circuito hay que dibujar los cables. + + Haz clic en el punto rojo de la primera entrada y conecta el cable que aparece a una entrada de la puerta "OR Exclusiva" + haciendo clic en uno de los puntos azules de dicha puerta. + ¡NO pinches y arrastres con el botón del ratón! + Conecta los puntos rojos de las entradas con los puntos azules de la puerta "OR Exclusiva" + y el punto rojo de dicha puerta con el punto azul de la salida. + Así de fácil: un punto rojo va a un punto azul. + Tu primer circuito ya funcionará. + Para empezar la simulación, puedes hacer clic en el botón "Simular" de la barra de herramientas. + La simulación ya está activa. Ahora puedes cambiar los valores de las entradas haciendo clic en ellas. + Para terminar la simulación, haz clic en el botón "Stop" de la barra de herramientas. + Para que todo quede perfecto, tendrías que poner etiquetas a las entradas y salidas. + + Haz clic con el botón derecho en una entrada para abrir un cuadro de diálogo. + En MacOS puedes usar el control-clic. + Así podrás nombrar la entrada. + Etiqueta todas las entradas y salidas. + Los nombres de las entradas y salidas deben ser únicos. + Saltar el tutorial diff --git a/src/main/resources/lang/lang_es_ref.xml b/src/main/resources/lang/lang_es_ref.xml index 3a99c71f6..bea37a0a2 100644 --- a/src/main/resources/lang/lang_es_ref.xml +++ b/src/main/resources/lang/lang_es_ref.xml @@ -1739,4 +1739,56 @@ Therefore, the signal 'D_out' is also available to check the value in this case. Error while reading the toolchain configuration {0} Command "{0}" has been started! Processing may take some time! The command "{0}" has been completed! + There is a unnamed input or output! + The signal name "{0}" is invalid or used multiple times! + Error when substituting components for the analysis. + Error in the evaluation of the generic code of the circuit. Code + {1} + at Component: {0} + Error while parsing generics code. + Generic Parameterization + Statements used to generify a circuit. + Circuit is generic + Allows to create a generic circuit. + Show Tutorial at Startup + Enables the tutorial. + Inputs + Bits + Addr. Bits + Tutorial + In the following you will be guided to the first circuit with a short tutorial: + + First, insert an input into the circuit. You will find the input in the menu Components▸IO. + Now add a second input to the circuit. You can also click on the input + in the toolbar. + + It is best to place the second input with two grid spacings under the first input. + You can move the circuit by holding down the right mouse button. + By clicking on the inputs you can move them. + Next, an "Exclusive Or" gate is to be inserted. + You can find this gate in the menu Components▸Logic. + Place this component with two grid spacings to the right of the inputs. + The last component to be inserted is an output. + Set it with two grid spacings to the right of the "Exclusive Or" gate. + In order to complete the circuit, connecting wires must be drawn. + + Click on the red dot at the first input and connect it to an input of the "Exclusive Or" gate, + by clicking on a blue dot of the "Exclusive Or" gate afterwards. + Do NOT drag with mouse button down! + Connect the red dots of the inputs to the blue dots of the + "Exclusive Or" gate and the red dot of the "Exclusive Or" gate to the blue dot of the output. + + While drawing, you can pin the wire by clicking somewhere on the canvas. + Right-click cancels the drawing of the wire (control-click on MacOS). + Your first circuit is now functional. + To start the simulation, you can click on the Play button in the toolbar. + The simulation is now active. Now you can switch the inputs by clicking on them. + To stop the simulation, click on the Stop button in the toolbar. + For completeness, the inputs and outputs should be labeled. + + Right-click on an input to open a dialog. On MacOS control-click is used. + Here the input can be given a name. + Label all inputs and outputs. + The inputs and outputs should be uniquely named. + Skip Tutorial