minix/netbsd
1
0
Fork 0
mirror of https://github.com/Stichting-MINIX-Research-Foundation/netbsd.git synced 2025-09-10 07:39:25 -04:00
Code Issues Packages Projects Releases Wiki Activity
netbsd/sys/arch/mips/sibyte/dev/sbscn.c
Lionel Sambuc db4f849365 2015/10/10 12:00:00 UTC
2015-10-15 10:25:28 +02:00

1903 lines
45 KiB
C
Raw Permalink Blame History

/* $NetBSD: sbscn.c,v 1.41 2015/04/13 21:18:42 riastradh Exp $ */
/*
* Copyright 2000, 2001
* Broadcom Corporation. All rights reserved.
*
* This software is furnished under license and may be used and copied only
* in accordance with the following terms and conditions. Subject to these
* conditions, you may download, copy, install, use, modify and distribute
* modified or unmodified copies of this software in source and/or binary
* form. No title or ownership is transferred hereby.
*
* 1) Any source code used, modified or distributed must reproduce and
* retain this copyright notice and list of conditions as they appear in
* the source file.
*
* 2) No right is granted to use any trade name, trademark, or logo of
* Broadcom Corporation. The "Broadcom Corporation" name may not be
* used to endorse or promote products derived from this software
* without the prior written permission of Broadcom Corporation.
*
* 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
* NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
* FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
* LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* from: $NetBSD: com.c,v 1.172 2000/05/03 19:19:04 thorpej Exp */
/*-
* Copyright (c) 1998, 1999 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)com.c 7.5 (Berkeley) 5/16/91
*/
/*
* `sbscn' driver, supports SiByte SB-1250 SOC DUART.
*
* This DUART is quite similar in programming model to the scn2681/68681
* DUARTs supported by the NetBSD/amiga `mfc' and NetBSD/pc532 `scn'
* driver, but substantial rework would have been necessary to make
* those drivers sane w.r.t. bus_space (which would then have been
* required on NetBSD/sbmips very early on), and to accommodate the
* different register mappings.
*
* So, another driver. Eventually there should be One True Driver,
* but we're not here to save the world.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: sbscn.c,v 1.41 2015/04/13 21:18:42 riastradh Exp $");
#define SBSCN_DEBUG
#include "opt_ddb.h"
#include "ioconf.h"
#ifdef RND_SBSCN
#include <sys/rndsource.h>
#endif
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/select.h>
#include <sys/tty.h>
#include <sys/proc.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/uio.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/types.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/vnode.h>
#include <sys/kauth.h>
#include <sys/intr.h>
#include <mips/sibyte/dev/sbobiovar.h>
#if 0
#include <mips/sibyte/dev/sbscnreg.h>
#endif
#include <mips/sibyte/dev/sbscnvar.h>
#include <dev/cons.h>
#include <mips/locore.h>
void sbscn_attach_channel(struct sbscn_softc *sc, int chan, int intr);
#if defined(DDB) || defined(KGDB)
static void sbscn_enable_debugport(struct sbscn_channel *ch);
#endif
void sbscn_config(struct sbscn_channel *ch);
void sbscn_shutdown(struct sbscn_channel *ch);
int sbscn_speed(long, long *);
static int cflag2modes(tcflag_t, u_char *, u_char *);
int sbscn_param(struct tty *, struct termios *);
void sbscn_start(struct tty *);
int sbscn_hwiflow(struct tty *, int);
void sbscn_loadchannelregs(struct sbscn_channel *);
void sbscn_dohwiflow(struct sbscn_channel *);
void sbscn_break(struct sbscn_channel *, int);
void sbscn_modem(struct sbscn_channel *, int);
void tiocm_to_sbscn(struct sbscn_channel *, int, int);
int sbscn_to_tiocm(struct sbscn_channel *);
void sbscn_iflush(struct sbscn_channel *);
int sbscn_init(u_long addr, int chan, int rate, tcflag_t cflag);
int sbscn_common_getc(u_long addr, int chan);
void sbscn_common_putc(u_long addr, int chan, int c);
void sbscn_intr(void *arg, uint32_t status, vaddr_t pc);
int sbscn_cngetc(dev_t dev);
void sbscn_cnputc(dev_t dev, int c);
void sbscn_cnpollc(dev_t dev, int on);
dev_type_open(sbscnopen);
dev_type_close(sbscnclose);
dev_type_read(sbscnread);
dev_type_write(sbscnwrite);
dev_type_ioctl(sbscnioctl);
dev_type_stop(sbscnstop);
dev_type_tty(sbscntty);
dev_type_poll(sbscnpoll);
const struct cdevsw sbscn_cdevsw = {
.d_open = sbscnopen,
.d_close = sbscnclose,
.d_read = sbscnread,
.d_write = sbscnwrite,
.d_ioctl = sbscnioctl,
.d_stop = sbscnstop,
.d_tty = sbscntty,
.d_poll = sbscnpoll,
.d_mmap = nommap,
.d_kqfilter = ttykqfilter,
.d_discard = nodiscard,
.d_flag = D_TTY
};
#define integrate static inline
void sbscn_soft(void *);
integrate void sbscn_rxsoft(struct sbscn_channel *, struct tty *);
integrate void sbscn_txsoft(struct sbscn_channel *, struct tty *);
integrate void sbscn_stsoft(struct sbscn_channel *, struct tty *);
integrate void sbscn_schedrx(struct sbscn_channel *);
void sbscn_diag(void *);
/*
* Make this an option variable one can patch.
* But be warned: this must be a power of 2!
*/
u_int sbscn_rbuf_size = SBSCN_RING_SIZE;
/* Stop input when 3/4 of the ring is full; restart when only 1/4 is full. */
u_int sbscn_rbuf_hiwat = (SBSCN_RING_SIZE * 1) / 4;
u_int sbscn_rbuf_lowat = (SBSCN_RING_SIZE * 3) / 4;
static int sbscn_cons_present;
static int sbscn_cons_attached;
static u_long sbscn_cons_addr;
static int sbscn_cons_chan;
static int sbscn_cons_rate;
static tcflag_t sbscn_cons_cflag;
#ifdef KGDB
#include <sys/kgdb.h>
static int sbscn_kgdb_present;
static int sbscn_kgdb_attached;
static u_long sbscn_kgdb_addr;
static int sbscn_kgdb_chan;
int sbscn_kgdb_getc(void *);
void sbscn_kgdb_putc(void *, int);
#endif /* KGDB */
static int sbscn_match(device_t, cfdata_t, void *);
static void sbscn_attach(device_t, device_t, void *);
CFATTACH_DECL_NEW(sbscn, sizeof(struct sbscn_softc),
sbscn_match, sbscn_attach, NULL, NULL);
#define READ_REG(rp) (mips3_ld((volatile uint64_t *)(rp)))
#define WRITE_REG(rp, val) (mips3_sd((volatile uint64_t *)(rp), (val)))
/*
* input and output signals are actually the _inverse_ of the bits in the
* input and output port registers!
*/
#define GET_INPUT_SIGNALS(ch) \
((~READ_REG(MIPS_PHYS_TO_KSEG1((ch)->ch_sc->sc_addr + 0x280))) & (ch)->ch_i_mask)
#define SET_OUTPUT_SIGNALS(ch, val) \
do { \
int sigs_to_set, sigs_to_clr; \
\
sigs_to_set = (ch)->ch_o_mask & val; \
sigs_to_clr = (ch)->ch_o_mask & ~val; \
\
/* set signals by clearing op bits, and vice versa */ \
WRITE_REG(MIPS_PHYS_TO_KSEG1((ch)->ch_sc->sc_addr + 0x2c0), \
sigs_to_set); \
WRITE_REG(MIPS_PHYS_TO_KSEG1((ch)->ch_sc->sc_addr + 0x2b0), \
sigs_to_clr); \
} while (0)
static int
sbscn_match(device_t parent, cfdata_t match, void *aux)
{
struct sbobio_attach_args *sa = aux;
if (sa->sa_locs.sa_type != SBOBIO_DEVTYPE_DUART)
return (0);
return 1;
}
static void
sbscn_attach(device_t parent, device_t self, void *aux)
{
struct sbscn_softc *sc = device_private(self);
struct sbobio_attach_args *sa = aux;
int i;
sc->sc_dev = self;
sc->sc_addr = sa->sa_base + sa->sa_locs.sa_offset;
aprint_normal("\n");
for (i = 0; i < 2; i++)
sbscn_attach_channel(sc, i, sa->sa_locs.sa_intr[i]);
/* init duart_opcr */
WRITE_REG(MIPS_PHYS_TO_KSEG1(sc->sc_addr + 0x270), 0);
/* init duart_aux_ctrl */
WRITE_REG(MIPS_PHYS_TO_KSEG1(sc->sc_addr + 0x210), 0x0f); /* XXX */
}
void
sbscn_attach_channel(struct sbscn_softc *sc, int chan, int intr)
{
struct sbscn_channel *ch = &sc->sc_channels[chan];
u_long chan_addr;
struct tty *tp;
ch->ch_sc = sc;
ch->ch_num = chan;
chan_addr = sc->sc_addr + (0x100 * chan);
ch->ch_base = (void *)MIPS_PHYS_TO_KSEG1(chan_addr);
ch->ch_isr_base =
(void *)MIPS_PHYS_TO_KSEG1(sc->sc_addr + 0x220 + (0x20 * chan));
ch->ch_imr_base =
(void *)MIPS_PHYS_TO_KSEG1(sc->sc_addr + 0x230 + (0x20 * chan));
#ifdef XXXCGDnotyet
ch->ch_inchg_base =
(void *)MIPS_PHYS_TO_KSEG1(sc->sc_addr + 0x2d0 + (0x10 * chan));
#endif
ch->ch_i_dcd = ch->ch_i_dcd_pin = 0 /* XXXCGD */;
ch->ch_i_cts = ch->ch_i_cts_pin = 0 /* XXXCGD */;
ch->ch_i_dsr = ch->ch_i_dsr_pin = 0 /* XXXCGD */;
ch->ch_i_ri = ch->ch_i_ri_pin = 0 /* XXXCGD */;
ch->ch_i_mask =
ch->ch_i_dcd | ch->ch_i_cts | ch->ch_i_dsr | ch->ch_i_ri;
ch->ch_o_dtr = ch->ch_o_dtr_pin = 0 /* XXXCGD */;
ch->ch_o_rts = ch->ch_o_rts_pin = 0 /* XXXCGD */;
ch->ch_o_mask = ch->ch_o_dtr | ch->ch_o_rts;
ch->ch_intrhand = cpu_intr_establish(intr, IPL_SERIAL, sbscn_intr, ch);
callout_init(&ch->ch_diag_callout, 0);
/* Disable interrupts before configuring the device. */
ch->ch_imr = 0;
WRITE_REG(ch->ch_imr_base, ch->ch_imr);
if (sbscn_cons_present &&
sbscn_cons_addr == chan_addr && sbscn_cons_chan == chan) {
sbscn_cons_attached = 1;
/* Make sure the console is always "hardwired". */
delay(1000); /* wait for output to finish */
SET(ch->ch_hwflags, SBSCN_HW_CONSOLE);
SET(ch->ch_swflags, TIOCFLAG_SOFTCAR);
}
tp = tty_alloc();
tp->t_oproc = sbscn_start;
tp->t_param = sbscn_param;
tp->t_hwiflow = sbscn_hwiflow;
ch->ch_tty = tp;
ch->ch_rbuf = malloc(sbscn_rbuf_size << 1, M_DEVBUF, M_NOWAIT);
if (ch->ch_rbuf == NULL) {
aprint_error_dev(sc->sc_dev,
"channel %d: unable to allocate ring buffer\n",
chan);
return;
}
ch->ch_ebuf = ch->ch_rbuf + (sbscn_rbuf_size << 1);
tty_attach(tp);
if (ISSET(ch->ch_hwflags, SBSCN_HW_CONSOLE)) {
int maj;
/* locate the major number */
maj = cdevsw_lookup_major(&sbscn_cdevsw);
cn_tab->cn_dev = makedev(maj,
(device_unit(sc->sc_dev) << 1) + chan);
aprint_normal_dev(sc->sc_dev, "channel %d: %s\n",
chan, "console");
}
#ifdef KGDB
/*
* Allow kgdb to "take over" this port. If this is
* the kgdb device, it has exclusive use.
*/
if (sbscn_kgdb_present &&
sbscn_kgdb_addr == chan_addr && sbscn_kgdb_chan == chan) {
sbscn_kgdb_attached = 1;
SET(sc->sc_hwflags, SBSCN_HW_KGDB);
aprint_normal_dev(sc->sc_dev, "channel %d: %s\n",
chan, "kgdb");
}
#endif
ch->ch_si = softint_establish(SOFTINT_SERIAL, sbscn_soft, ch);
#ifdef RND_SBSCN
rnd_attach_source(&ch->ch_rnd_source, device_xname(sc->sc_dev),
RND_TYPE_TTY, RND_FLAG_COLLECT_TIME|
RND_FLAG_ESTIMATE_TIME);
#endif
sbscn_config(ch);
SET(ch->ch_hwflags, SBSCN_HW_DEV_OK);
}
int
sbscn_speed(long speed, long *brcp)
{
#define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */
int x, err;
int frequency = 100000000;
*brcp = divrnd(frequency / 20, speed) - 1;
if (speed <= 0)
return (-1);
x = divrnd(frequency / 20, speed);
if (x <= 0)
return (-1);
err = divrnd(((quad_t)frequency) * 1000 / 20, speed * x) - 1000;
if (err < 0)
err = -err;
if (err > SBSCN_TOLERANCE)
return (-1);
*brcp = x - 1;
return (0);
#undef divrnd
}
#ifdef SBSCN_DEBUG
void sbscn_status(struct sbscn_channel *, const char *);
int sbscn_debug = 0 /* XXXCGD */;
void
sbscn_status(struct sbscn_channel *ch, const char *str)
{
struct sbscn_softc *sc = ch->ch_sc;
struct tty *tp = ch->ch_tty;
aprint_normal_dev(sc->sc_dev,
"chan %d: %s %sclocal %sdcd %sts_carr_on %sdtr %stx_stopped\n",
ch->ch_num, str,
ISSET(tp->t_cflag, CLOCAL) ? "+" : "-",
ISSET(ch->ch_iports, ch->ch_i_dcd) ? "+" : "-",
ISSET(tp->t_state, TS_CARR_ON) ? "+" : "-",
ISSET(ch->ch_oports, ch->ch_o_dtr) ? "+" : "-",
ch->ch_tx_stopped ? "+" : "-");
aprint_normal_dev(sc->sc_dev,
"chan %d: %s %scrtscts %scts %sts_ttstop %srts %xrx_flags\n",
ch->ch_num, str,
ISSET(tp->t_cflag, CRTSCTS) ? "+" : "-",
ISSET(ch->ch_iports, ch->ch_i_cts) ? "+" : "-",
ISSET(tp->t_state, TS_TTSTOP) ? "+" : "-",
ISSET(ch->ch_oports, ch->ch_o_rts) ? "+" : "-",
ch->ch_rx_flags);
}
#endif
#if defined(DDB) || defined(KGDB)
static void
sbscn_enable_debugport(struct sbscn_channel *ch)
{
int s;
/* Turn on line break interrupt, set carrier. */
s = splserial();
#if 0 /* DO NOT turn on break interrupt at this time. */
ch->ch_imr = 0x04;
#else
ch->ch_imr = 0x00;
#endif
WRITE_REG(ch->ch_imr_base, ch->ch_imr);
SET(ch->ch_oports, ch->ch_o_dtr | ch->ch_o_rts);
SET_OUTPUT_SIGNALS(ch, ch->ch_oports);
splx(s);
}
#endif
void
sbscn_config(struct sbscn_channel *ch)
{
/* Disable interrupts before configuring the device. */
ch->ch_imr = 0x00;
WRITE_REG(ch->ch_imr_base, ch->ch_imr);
#ifdef DDB
if (ISSET(ch->ch_hwflags, SBSCN_HW_CONSOLE))
sbscn_enable_debugport(ch);
#endif
#ifdef KGDB
/*
* Allow kgdb to "take over" this port. If this is
* the kgdb device, it has exclusive use.
*/
if (ISSET(ch->ch_hwflags, SBSCN_HW_KGDB))
sbscn_enable_debugport(ch);
#endif
}
void
sbscn_shutdown(struct sbscn_channel *ch)
{
struct tty *tp = ch->ch_tty;
int s;
s = splserial();
/* If we were asserting flow control, then deassert it. */
SET(ch->ch_rx_flags, RX_IBUF_BLOCKED);
sbscn_dohwiflow(ch);
/* Clear any break condition set with TIOCSBRK. */
sbscn_break(ch, 0);
/*
* Hang up if necessary. Wait a bit, so the other side has time to
* notice even if we immediately open the port again.
* Avoid tsleeping above splhigh().
*/
if (ISSET(tp->t_cflag, HUPCL)) {
sbscn_modem(ch, 0);
splx(s);
/* XXX tsleep will only timeout */
(void) tsleep(ch, TTIPRI, ttclos, hz);
s = splserial();
}
/* Turn off interrupts. */
#ifdef DDB
if (ISSET(ch->ch_hwflags, SBSCN_HW_CONSOLE))
#if 0 /* DO NOT turn on break interrupt at this time. */
ch->ch_imr = 0x04; /* interrupt on break */
#else
ch->ch_imr = 0x00;
#endif
else
#endif
ch->ch_imr = 0;
WRITE_REG(ch->ch_imr_base, ch->ch_imr);
splx(s);
}
int
sbscnopen(dev_t dev, int flag, int mode, struct lwp *l)
{
int chan = SBSCN_CHAN(dev);
struct sbscn_softc *sc;
struct sbscn_channel *ch;
struct tty *tp;
int s, s2;
int error;
sc = device_lookup_private(&sbscn_cd, SBSCN_UNIT(dev));
if (sc == NULL)
return (ENXIO);
ch = &sc->sc_channels[chan];
if (!ISSET(ch->ch_hwflags, SBSCN_HW_DEV_OK) || ch->ch_rbuf == NULL)
return (ENXIO);
#ifdef KGDB
/*
* If this is the kgdb port, no other use is permitted.
*/
if (ISSET(ch->ch_hwflags, SBSCN_HW_KGDB))
return (EBUSY);
#endif
tp = ch->ch_tty;
if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp))
return (EBUSY);
s = spltty();
/*
* Do the following iff this is a first open.
*/
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
struct termios t;
tp->t_dev = dev;
s2 = splserial();
/* Turn on receive, break, and status change interrupts. */
#if 0 /* DO NOT turn on break or status change interrupt at this time. */
ch->ch_imr = 0xe;
#else
ch->ch_imr = 0x2;
#endif
WRITE_REG(ch->ch_imr_base, ch->ch_imr);
/* Fetch the current modem control status, needed later. */
ch->ch_iports = GET_INPUT_SIGNALS(ch);
ch->ch_iports_delta = 0;
splx(s2);
/*
* Initialize the termios status to the defaults. Add in the
* sticky bits from TIOCSFLAGS.
*/
t.c_ispeed = 0;
if (ISSET(ch->ch_hwflags, SBSCN_HW_CONSOLE)) {
t.c_ospeed = sbscn_cons_rate;
t.c_cflag = sbscn_cons_cflag;
} else {
t.c_ospeed = TTYDEF_SPEED;
t.c_cflag = TTYDEF_CFLAG;
}
if (ISSET(ch->ch_swflags, TIOCFLAG_CLOCAL))
SET(t.c_cflag, CLOCAL);
if (ISSET(ch->ch_swflags, TIOCFLAG_CRTSCTS))
SET(t.c_cflag, CRTSCTS);
if (ISSET(ch->ch_swflags, TIOCFLAG_MDMBUF))
SET(t.c_cflag, MDMBUF);
/* Make sure sbscn_param() will do something. */
tp->t_ospeed = 0;
(void) sbscn_param(tp, &t);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_lflag = TTYDEF_LFLAG;
ttychars(tp);
ttsetwater(tp);
s2 = splserial();
/*
* Turn on DTR. We must always do this, even if carrier is not
* present, because otherwise we'd have to use TIOCSDTR
* immediately after setting CLOCAL, which applications do not
* expect. We always assert DTR while the device is open
* unless explicitly requested to deassert it.
*/
sbscn_modem(ch, 1);
/* Clear the input ring, and unblock. */
ch->ch_rbput = ch->ch_rbget = ch->ch_rbuf;
ch->ch_rbavail = sbscn_rbuf_size;
sbscn_iflush(ch);
CLR(ch->ch_rx_flags, RX_ANY_BLOCK);
sbscn_dohwiflow(ch);
#ifdef SBSCN_DEBUG
if (sbscn_debug)
sbscn_status(ch, "sbscnopen ");
#endif
splx(s2);
}
splx(s);
error = ttyopen(tp, SBSCN_DIALOUT(dev), ISSET(flag, O_NONBLOCK));
if (error)
goto bad;
error = (*tp->t_linesw->l_open)(dev, tp);
if (error)
goto bad;
return (0);
bad:
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
/*
* We failed to open the device, and nobody else had it opened.
* Clean up the state as appropriate.
*/
sbscn_shutdown(ch);
}
return (error);
}
int
sbscnclose(dev_t dev, int flag, int mode, struct lwp *l)
{
struct sbscn_softc *sc = device_lookup_private(&sbscn_cd, SBSCN_UNIT(dev));
struct sbscn_channel *ch = &sc->sc_channels[SBSCN_CHAN(dev)];
struct tty *tp = ch->ch_tty;
/* XXX This is for cons.c. */
if (!ISSET(tp->t_state, TS_ISOPEN))
return (0);
(*tp->t_linesw->l_close)(tp, flag);
ttyclose(tp);
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
/*
* Although we got a last close, the device may still be in
* use; e.g. if this was the dialout node, and there are still
* processes waiting for carrier on the non-dialout node.
*/
sbscn_shutdown(ch);
}
return (0);
}
int
sbscnread(dev_t dev, struct uio *uio, int flag)
{
struct sbscn_softc *sc = device_lookup_private(&sbscn_cd, SBSCN_UNIT(dev));
struct sbscn_channel *ch = &sc->sc_channels[SBSCN_CHAN(dev)];
struct tty *tp = ch->ch_tty;
return ((*tp->t_linesw->l_read)(tp, uio, flag));
}
int
sbscnwrite(dev_t dev, struct uio *uio, int flag)
{
struct sbscn_softc *sc = device_lookup_private(&sbscn_cd, SBSCN_UNIT(dev));
struct sbscn_channel *ch = &sc->sc_channels[SBSCN_CHAN(dev)];
struct tty *tp = ch->ch_tty;
return ((*tp->t_linesw->l_write)(tp, uio, flag));
}
int
sbscnpoll(dev_t dev, int events, struct lwp *l)
{
struct sbscn_softc *sc = device_lookup_private(&sbscn_cd, SBSCN_UNIT(dev));
struct sbscn_channel *ch = &sc->sc_channels[SBSCN_CHAN(dev)];
struct tty *tp = ch->ch_tty;
return ((*tp->t_linesw->l_poll)(tp, events, l));
}
struct tty *
sbscntty(dev_t dev)
{
struct sbscn_softc *sc = device_lookup_private(&sbscn_cd, SBSCN_UNIT(dev));
struct sbscn_channel *ch = &sc->sc_channels[SBSCN_CHAN(dev)];
struct tty *tp = ch->ch_tty;
return (tp);
}
int
sbscnioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l)
{
struct sbscn_softc *sc = device_lookup_private(&sbscn_cd, SBSCN_UNIT(dev));
struct sbscn_channel *ch = &sc->sc_channels[SBSCN_CHAN(dev)];
struct tty *tp = ch->ch_tty;
int error;
int s;
error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l);
if (error != EPASSTHROUGH)
return (error);
error = ttioctl(tp, cmd, data, flag, l);
if (error != EPASSTHROUGH)
return (error);
error = 0;
s = splserial();
switch (cmd) {
case TIOCSBRK:
sbscn_break(ch, 1);
break;
case TIOCCBRK:
sbscn_break(ch, 0);
break;
case TIOCSDTR:
sbscn_modem(ch, 1);
break;
case TIOCCDTR:
sbscn_modem(ch, 0);
break;
case TIOCGFLAGS:
*(int *)data = ch->ch_swflags;
break;
case TIOCSFLAGS:
error = kauth_authorize_device_tty(l->l_cred,
KAUTH_DEVICE_TTY_PRIVSET, tp);
if (error)
break;
ch->ch_swflags = *(int *)data;
break;
case TIOCMSET:
case TIOCMBIS:
case TIOCMBIC:
tiocm_to_sbscn(ch, cmd, *(int *)data);
break;
case TIOCMGET:
*(int *)data = sbscn_to_tiocm(ch);
break;
default:
error = EPASSTHROUGH;
break;
}
splx(s);
#ifdef SBSCN_DEBUG
if (sbscn_debug)
sbscn_status(ch, "sbscn_ioctl ");
#endif
return (error);
}
integrate void
sbscn_schedrx(struct sbscn_channel *ch)
{
ch->ch_rx_ready = 1;
/* Wake up the poller. */
softint_schedule(ch->ch_si);
}
void
sbscn_break(struct sbscn_channel *ch, int onoff)
{
/* XXXCGD delay break until not busy */
if (onoff)
WRITE_REG(ch->ch_base + 0x50, 0x60);
else
WRITE_REG(ch->ch_base + 0x50, 0x70);
#if 0
if (!ch->ch_heldchange) {
if (ch->ch_tx_busy) {
ch->ch_heldtbc = ch->ch_tbc;
ch->ch_tbc = 0;
ch->ch_heldchange = 1;
} else
sbscn_loadchannelregs(ch);
}
#endif
}
void
sbscn_modem(struct sbscn_channel *ch, int onoff)
{
if (ch->ch_o_dtr == 0)
return;
if (onoff)
SET(ch->ch_oports, ch->ch_o_dtr);
else
CLR(ch->ch_oports, ch->ch_o_dtr);
if (!ch->ch_heldchange) {
if (ch->ch_tx_busy) {
ch->ch_heldtbc = ch->ch_tbc;
ch->ch_tbc = 0;
ch->ch_heldchange = 1;
} else
sbscn_loadchannelregs(ch);
}
}
void
tiocm_to_sbscn(struct sbscn_channel *ch, int how, int ttybits)
{
u_char bits;
bits = 0;
if (ISSET(ttybits, TIOCM_DTR))
SET(bits, ch->ch_o_dtr);
if (ISSET(ttybits, TIOCM_RTS))
SET(bits, ch->ch_o_rts);
switch (how) {
case TIOCMBIC:
CLR(ch->ch_oports, bits);
break;
case TIOCMBIS:
SET(ch->ch_oports, bits);
break;
case TIOCMSET:
ch->ch_oports = bits;
break;
}
if (!ch->ch_heldchange) {
if (ch->ch_tx_busy) {
ch->ch_heldtbc = ch->ch_tbc;
ch->ch_tbc = 0;
ch->ch_heldchange = 1;
} else
sbscn_loadchannelregs(ch);
}
}
int
sbscn_to_tiocm(struct sbscn_channel *ch)
{
u_char hwbits;
int ttybits = 0;
hwbits = ch->ch_oports;
if (ISSET(hwbits, ch->ch_o_dtr))
SET(ttybits, TIOCM_DTR);
if (ISSET(hwbits, ch->ch_o_rts))
SET(ttybits, TIOCM_RTS);
hwbits = ch->ch_iports;
if (ISSET(hwbits, ch->ch_i_dcd))
SET(ttybits, TIOCM_CD);
if (ISSET(hwbits, ch->ch_i_cts))
SET(ttybits, TIOCM_CTS);
if (ISSET(hwbits, ch->ch_i_dsr))
SET(ttybits, TIOCM_DSR);
if (ISSET(hwbits, ch->ch_i_ri))
SET(ttybits, TIOCM_RI);
if (ch->ch_imr != 0)
SET(ttybits, TIOCM_LE);
return (ttybits);
}
static int
cflag2modes(tcflag_t cflag, u_char *mode1p, u_char *mode2p)
{
u_char mode1;
u_char mode2;
int err = 0;
mode1 = mode2 = 0;
switch (ISSET(cflag, CSIZE)) {
case CS7:
mode1 |= 2; /* XXX */
break;
default:
err = -1;
/* FALLTHRU for sanity */
case CS8:
mode1 |= 3; /* XXX */
break;
}
if (!ISSET(cflag, PARENB))
mode1 |= 2 << 3;
else {
mode1 |= 0 << 3;
if (ISSET(cflag, PARODD))
mode1 |= 1 << 2;
}
if (ISSET(cflag, CSTOPB))
mode2 |= 1 << 3; /* two stop bits XXX not std */
if (ISSET(cflag, CRTSCTS)) {
mode1 |= 1 << 7;
mode2 |= 1 << 4;
}
*mode1p = mode1;
*mode2p = mode2;
return (err);
}
int
sbscn_param(struct tty *tp, struct termios *t)
{
struct sbscn_softc *sc = device_lookup_private(&sbscn_cd, SBSCN_UNIT(tp->t_dev));
struct sbscn_channel *ch = &sc->sc_channels[SBSCN_CHAN(tp->t_dev)];
long brc;
u_char mode1, mode2;
int s;
/* XXX reset to console parameters if console? */
#if 0
XXX disable, enable.
#endif
/* Check requested parameters. */
if (sbscn_speed(t->c_ospeed, &brc) < 0)
return (EINVAL);
if (t->c_ispeed && t->c_ispeed != t->c_ospeed)
return (EINVAL);
/*
* For the console, always force CLOCAL and !HUPCL, so that the port
* is always active.
*/
if (ISSET(ch->ch_swflags, TIOCFLAG_SOFTCAR) ||
ISSET(ch->ch_hwflags, SBSCN_HW_CONSOLE)) {
SET(t->c_cflag, CLOCAL);
CLR(t->c_cflag, HUPCL);
}
/*
* If there were no changes, don't do anything. This avoids dropping
* input and improves performance when all we did was frob things like
* VMIN and VTIME.
*/
if (tp->t_ospeed == t->c_ospeed &&
tp->t_cflag == t->c_cflag)
return (0);
if (cflag2modes(t->c_cflag, &mode1, &mode2) < 0)
return (EINVAL);
s = splserial();
ch->ch_mode1 = mode1;
ch->ch_mode2 = mode2;
/*
* If we're not in a mode that assumes a connection is present, then
* ignore carrier changes.
*/
if (ISSET(t->c_cflag, CLOCAL | MDMBUF))
ch->ch_i_dcd = 0;
else
ch->ch_i_dcd = ch->ch_i_dcd_pin;
/*
* Set the flow control pins depending on the current flow control
* mode.
*/
if (ISSET(t->c_cflag, CRTSCTS)) {
ch->ch_o_dtr = ch->ch_o_dtr_pin;
ch->ch_o_rts = ch->ch_o_rts_pin;
ch->ch_i_cts = ch->ch_i_cts_pin;
/* hw controle enable bits in mod regs set by cflag2modes */
} else if (ISSET(t->c_cflag, MDMBUF)) {
/*
* For DTR/DCD flow control, make sure we don't toggle DTR for
* carrier detection.
*/
ch->ch_o_dtr = 0;
ch->ch_o_rts = ch->ch_o_dtr_pin;
ch->ch_i_cts = ch->ch_i_dcd_pin;
} else {
/*
* If no flow control, then always set RTS. This will make
* the other side happy if it mistakenly thinks we're doing
* RTS/CTS flow control.
*/
ch->ch_o_dtr = ch->ch_o_dtr_pin | ch->ch_o_rts_pin;
ch->ch_o_rts = 0;
ch->ch_i_cts = 0;
if (ISSET(ch->ch_oports, ch->ch_o_dtr_pin))
SET(ch->ch_oports, ch->ch_o_rts_pin);
else
CLR(ch->ch_oports, ch->ch_o_rts_pin);
}
/* XXX maybe mask the ports which generate intrs? */
ch->ch_brc = brc;
/* XXX maybe set fifo-full receive mode if RTSCTS and high speed? */
/* And copy to tty. */
tp->t_ispeed = 0;
tp->t_ospeed = t->c_ospeed;
tp->t_cflag = t->c_cflag;
if (!ch->ch_heldchange) {
if (ch->ch_tx_busy) {
ch->ch_heldtbc = ch->ch_tbc;
ch->ch_tbc = 0;
ch->ch_heldchange = 1;
} else
sbscn_loadchannelregs(ch);
}
if (!ISSET(t->c_cflag, CHWFLOW)) {
/* Disable the high water mark. */
ch->ch_r_hiwat = 0;
ch->ch_r_lowat = 0;
if (ISSET(ch->ch_rx_flags, RX_TTY_OVERFLOWED)) {
CLR(ch->ch_rx_flags, RX_TTY_OVERFLOWED);
sbscn_schedrx(ch);
}
if (ISSET(ch->ch_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED)) {
CLR(ch->ch_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED);
sbscn_dohwiflow(ch);
}
} else {
ch->ch_r_hiwat = sbscn_rbuf_hiwat;
ch->ch_r_lowat = sbscn_rbuf_lowat;
}
splx(s);
/*
* Update the tty layer's idea of the carrier bit, in case we changed
* CLOCAL or MDMBUF. We don't hang up here; we only do that by
* explicit request.
*/
(void) (*tp->t_linesw->l_modem)(tp,
ISSET(ch->ch_iports, ch->ch_i_dcd));
#ifdef SBSCN_DEBUG
if (sbscn_debug)
sbscn_status(ch, "sbscnparam ");
#endif
if (!ISSET(t->c_cflag, CHWFLOW)) {
if (ch->ch_tx_stopped) {
ch->ch_tx_stopped = 0;
sbscn_start(tp);
}
}
return (0);
}
void
sbscn_iflush(struct sbscn_channel *ch)
{
#ifdef DIAGNOSTIC
int reg;
#endif
int timo;
#ifdef DIAGNOSTIC
reg = 0xffff;
#endif
timo = 50000;
/* flush any pending I/O */
while (ISSET(READ_REG(ch->ch_base + 0x20), 0x01)
&& --timo)
#ifdef DIAGNOSTIC
reg =
#else
(void)
#endif
READ_REG(ch->ch_base + 0x60);
#ifdef DIAGNOSTIC
if (!timo)
aprint_debug_dev(ch->ch_sc->sc_dev,
"sbscn_iflush timeout %02x\n", reg & 0xff);
#endif
}
void
sbscn_loadchannelregs(struct sbscn_channel *ch)
{
/* XXXXX necessary? */
sbscn_iflush(ch);
WRITE_REG(ch->ch_imr_base, 0);
// XXX disable?
WRITE_REG(ch->ch_base + 0x00, ch->ch_mode1);
WRITE_REG(ch->ch_base + 0x10, ch->ch_mode2);
WRITE_REG(ch->ch_base + 0x30, ch->ch_brc);
ch->ch_oports_active = ch->ch_oports;
SET_OUTPUT_SIGNALS(ch, ch->ch_oports_active);
WRITE_REG(ch->ch_imr_base, ch->ch_imr);
}
int
sbscn_hwiflow(struct tty *tp, int block)
{
struct sbscn_softc *sc = device_lookup_private(&sbscn_cd, SBSCN_UNIT(tp->t_dev));
struct sbscn_channel *ch = &sc->sc_channels[SBSCN_CHAN(tp->t_dev)];
int s;
if (ch->ch_o_rts == 0)
return (0);
s = splserial();
if (block) {
if (!ISSET(ch->ch_rx_flags, RX_TTY_BLOCKED)) {
SET(ch->ch_rx_flags, RX_TTY_BLOCKED);
sbscn_dohwiflow(ch);
}
} else {
if (ISSET(ch->ch_rx_flags, RX_TTY_OVERFLOWED)) {
CLR(ch->ch_rx_flags, RX_TTY_OVERFLOWED);
sbscn_schedrx(ch);
}
if (ISSET(ch->ch_rx_flags, RX_TTY_BLOCKED)) {
CLR(ch->ch_rx_flags, RX_TTY_BLOCKED);
sbscn_dohwiflow(ch);
}
}
splx(s);
return (1);
}
/*
* (un)block input via hw flowcontrol
*/
void
sbscn_dohwiflow(struct sbscn_channel *ch)
{
if (ch->ch_o_rts == 0)
return;
if (ISSET(ch->ch_rx_flags, RX_ANY_BLOCK)) {
CLR(ch->ch_oports, ch->ch_o_rts);
CLR(ch->ch_oports_active, ch->ch_o_rts);
} else {
SET(ch->ch_oports, ch->ch_o_rts);
SET(ch->ch_oports_active, ch->ch_o_rts);
}
SET_OUTPUT_SIGNALS(ch, ch->ch_oports_active);
}
void
sbscn_start(struct tty *tp)
{
struct sbscn_softc *sc = device_lookup_private(&sbscn_cd, SBSCN_UNIT(tp->t_dev));
struct sbscn_channel *ch = &sc->sc_channels[SBSCN_CHAN(tp->t_dev)];
int s;
s = spltty();
if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP))
goto out;
if (ch->ch_tx_stopped)
goto out;
if (!ttypull(tp))
goto out;
/* Grab the first contiguous region of buffer space. */
{
u_char *tba;
int tbc;
tba = tp->t_outq.c_cf;
tbc = ndqb(&tp->t_outq, 0);
(void)splserial();
ch->ch_tba = tba;
ch->ch_tbc = tbc;
}
SET(tp->t_state, TS_BUSY);
ch->ch_tx_busy = 1;
/* Enable transmit completion interrupts if necessary. */
if (!ISSET(ch->ch_imr, 0x1)) {
SET(ch->ch_imr, 0x1);
WRITE_REG(ch->ch_imr_base, ch->ch_imr);
}
/* Output the first chunk of the contiguous buffer. */
{
u_char c;
while (ch->ch_tbc && READ_REG(ch->ch_base + 0x20) & 0x04) {
c = *ch->ch_tba++;
ch->ch_tbc--;
WRITE_REG(ch->ch_base + 0x70, c);
}
}
out:
splx(s);
return;
}
/*
* Stop output on a line.
*/
void
sbscnstop(struct tty *tp, int flag)
{
struct sbscn_softc *sc = device_lookup_private(&sbscn_cd, SBSCN_UNIT(tp->t_dev));
struct sbscn_channel *ch = &sc->sc_channels[SBSCN_CHAN(tp->t_dev)];
int s;
s = splserial();
if (ISSET(tp->t_state, TS_BUSY)) {
/* Stop transmitting at the next chunk. */
ch->ch_tbc = 0;
ch->ch_heldtbc = 0;
if (!ISSET(tp->t_state, TS_TTSTOP))
SET(tp->t_state, TS_FLUSH);
}
splx(s);
}
void
sbscn_diag(void *arg)
{
struct sbscn_channel *ch = arg;
struct sbscn_softc *sc = ch->ch_sc;
int overflows, floods;
int s;
s = splserial();
overflows = ch->ch_overflows;
ch->ch_overflows = 0;
floods = ch->ch_floods;
ch->ch_floods = 0;
ch->ch_errors = 0;
splx(s);
log(LOG_WARNING, "%s: channel %d: %d fifo overflow%s, %d ibuf flood%s\n",
device_xname(sc->sc_dev), ch->ch_num,
overflows, overflows == 1 ? "" : "s",
floods, floods == 1 ? "" : "s");
}
integrate void
sbscn_rxsoft(struct sbscn_channel *ch, struct tty *tp)
{
int (*rint)(int, struct tty *) = tp->t_linesw->l_rint;
u_char *get, *end;
u_int cc, scc;
u_char sr;
int code;
int s;
end = ch->ch_ebuf;
get = ch->ch_rbget;
scc = cc = sbscn_rbuf_size - ch->ch_rbavail;
if (cc == sbscn_rbuf_size) {
ch->ch_floods++;
if (ch->ch_errors++ == 0)
callout_reset(&ch->ch_diag_callout, 60 * hz,
sbscn_diag, ch);
}
while (cc) {
code = get[0];
sr = get[1];
if (ISSET(sr, 0xf0)) {
if (ISSET(sr, 0x10)) {
ch->ch_overflows++;
if (ch->ch_errors++ == 0)
callout_reset(&ch->ch_diag_callout,
60 * hz, sbscn_diag, ch);
}
if (ISSET(sr, 0xc0))
SET(code, TTY_FE);
if (ISSET(sr, 0x20))
SET(code, TTY_PE);
}
if ((*rint)(code, tp) == -1) {
/*
* The line discipline's buffer is out of space.
*/
if (!ISSET(ch->ch_rx_flags, RX_TTY_BLOCKED)) {
/*
* We're either not using flow control, or the
* line discipline didn't tell us to block for
* some reason. Either way, we have no way to
* know when there's more space available, so
* just drop the rest of the data.
*/
get += cc << 1;
if (get >= end)
get -= sbscn_rbuf_size << 1;
cc = 0;
} else {
/*
* Don't schedule any more receive processing
* until the line discipline tells us there's
* space available (through comhwiflow()).
* Leave the rest of the data in the input
* buffer.
*/
SET(ch->ch_rx_flags, RX_TTY_OVERFLOWED);
}
break;
}
get += 2;
if (get >= end)
get = ch->ch_rbuf;
cc--;
}
if (cc != scc) {
ch->ch_rbget = get;
s = splserial();
cc = ch->ch_rbavail += scc - cc;
/* Buffers should be ok again, release possible block. */
if (cc >= ch->ch_r_lowat) {
if (ISSET(ch->ch_rx_flags, RX_IBUF_OVERFLOWED)) {
CLR(ch->ch_rx_flags, RX_IBUF_OVERFLOWED);
SET(ch->ch_imr, 0x02);
WRITE_REG(ch->ch_imr_base, ch->ch_imr);
}
if (ISSET(ch->ch_rx_flags, RX_IBUF_BLOCKED)) {
CLR(ch->ch_rx_flags, RX_IBUF_BLOCKED);
sbscn_dohwiflow(ch);
}
}
splx(s);
}
}
integrate void
sbscn_txsoft(struct sbscn_channel *ch, struct tty *tp)
{
CLR(tp->t_state, TS_BUSY);
if (ISSET(tp->t_state, TS_FLUSH))
CLR(tp->t_state, TS_FLUSH);
else
ndflush(&tp->t_outq, (int)(ch->ch_tba - tp->t_outq.c_cf));
(*tp->t_linesw->l_start)(tp);
}
integrate void
sbscn_stsoft(struct sbscn_channel *ch, struct tty *tp)
{
u_char iports, delta;
int s;
s = splserial();
iports = ch->ch_iports;
delta = ch->ch_iports_delta;
ch->ch_iports_delta = 0;
splx(s);
if (ISSET(delta, ch->ch_i_dcd)) {
/*
* Inform the tty layer that carrier detect changed.
*/
(void) (*tp->t_linesw->l_modem)(tp,
ISSET(iports, ch->ch_i_dcd));
}
if (ISSET(delta, ch->ch_i_cts)) {
/* Block or unblock output according to flow control. */
if (ISSET(iports, ch->ch_i_cts)) {
ch->ch_tx_stopped = 0;
(*tp->t_linesw->l_start)(tp);
} else {
ch->ch_tx_stopped = 1;
}
}
#ifdef SBSCN_DEBUG
if (sbscn_debug)
sbscn_status(ch, "sbscn_stsoft");
#endif
}
void
sbscn_soft(void *arg)
{
struct sbscn_channel *ch = arg;
struct tty *tp = ch->ch_tty;
if (ch->ch_rx_ready) {
ch->ch_rx_ready = 0;
sbscn_rxsoft(ch, tp);
}
if (ch->ch_st_check) {
ch->ch_st_check = 0;
sbscn_stsoft(ch, tp);
}
if (ch->ch_tx_done) {
ch->ch_tx_done = 0;
sbscn_txsoft(ch, tp);
}
}
void
sbscn_intr(void *arg, uint32_t status, vaddr_t pc)
{
struct sbscn_channel *ch = arg;
u_char *put, *end;
u_int cc;
u_char isr, sr;
/* read ISR */
isr = READ_REG(ch->ch_isr_base) & ch->ch_imr;
if (isr == 0)
return;
end = ch->ch_ebuf;
put = ch->ch_rbput;
cc = ch->ch_rbavail;
do {
u_char iports, delta;
if (isr & 0x02) {
sr = READ_REG(ch->ch_base + 0x20);
/* XXX sr 0x01 bit must be set at this point */
#if defined(DDB) || defined(KGDB)
if ((sr & 0x80) == 0x80) {
#ifdef DDB
if (ISSET(ch->ch_hwflags, SBSCN_HW_CONSOLE)) {
(void)READ_REG(ch->ch_base + 0x60);
console_debugger();
continue;
}
#endif
#ifdef KGDB
if (ISSET(ch->ch_hwflags, SBSCN_HW_KGDB)) {
(void)READ_REG(ch->ch_base + 0x60);
kgdb_connect(1);
continue;
}
#endif
}
#endif /* DDB || KGDB */
if (!ISSET(ch->ch_rx_flags, RX_IBUF_OVERFLOWED)) {
while (cc > 0) {
put[0] = READ_REG(ch->ch_base + 0x60);
put[1] = sr;
put += 2;
if (put >= end)
put = ch->ch_rbuf;
cc--;
sr = READ_REG(ch->ch_base + 0x20);
if (!ISSET(sr, 0x02))
break;
}
/*
* Current string of incoming characters ended
* because no more data was available or we
* ran out of space. Schedule a receive event
* if any data was received. If we're out of
* space, turn off receive interrupts.
*/
ch->ch_rbput = put;
ch->ch_rbavail = cc;
if (!ISSET(ch->ch_rx_flags, RX_TTY_OVERFLOWED))
ch->ch_rx_ready = 1;
/*
* See if we are in danger of overflowing a
* buffer. If so, use hardware flow control
* to ease the pressure.
*/
if (!ISSET(ch->ch_rx_flags, RX_IBUF_BLOCKED) &&
cc < ch->ch_r_hiwat) {
SET(ch->ch_rx_flags, RX_IBUF_BLOCKED);
sbscn_dohwiflow(ch);
}
/*
* If we're out of space, disable receive
* interrupts until the queue has drained
* a bit.
*/
if (!cc) {
SET(ch->ch_rx_flags,
RX_IBUF_OVERFLOWED);
CLR(ch->ch_imr, 0x02);
WRITE_REG(ch->ch_imr_base, ch->ch_imr);
}
} else {
/* XXX panic? */
CLR(ch->ch_imr, 0x02);
WRITE_REG(ch->ch_imr_base, ch->ch_imr);
continue;
}
}
if (isr & 0x01) {
CLR(ch->ch_imr, 0x01);
WRITE_REG(ch->ch_imr_base, ch->ch_imr);
}
#if 0
XXX
if (isr & 0x08) {
clear input signal change!
}
#endif
iports = GET_INPUT_SIGNALS(ch);
delta = iports ^ ch->ch_iports;
ch->ch_iports = iports;
/*
* Process normal status changes
*/
if (ISSET(delta, ch->ch_i_mask)) {
SET(ch->ch_iports_delta, delta);
/*
* Stop output immediately if we lose the output
* flow control signal or carrier detect.
*/
if (ISSET(~iports, ch->ch_i_mask)) {
ch->ch_tbc = 0;
ch->ch_heldtbc = 0;
#ifdef SBSCN_DEBUG
if (sbscn_debug)
sbscn_status(ch, "sbscn_intr ");
#endif
}
ch->ch_st_check = 1;
}
} while ((isr = (READ_REG(ch->ch_isr_base) & ch->ch_imr)) != 0);
/*
* Done handling any receive interrupts and status changes, and
* clearing the tx-ready interrupt if it was set. See if data can
* be transmitted as well. Schedule tx done event if no data left
* and tty was marked busy.
*/
sr = READ_REG(ch->ch_base + 0x20);
if (ISSET(sr, 0x4)) {
/*
* If we've delayed a parameter change, do it now, and restart
* output.
*/
if (ch->ch_heldchange) {
sbscn_loadchannelregs(ch);
ch->ch_heldchange = 0;
ch->ch_tbc = ch->ch_heldtbc;
ch->ch_heldtbc = 0;
}
/* Output the next chunk of the contiguous buffer, if any. */
if (ch->ch_tbc > 0) {
int wrote1;
u_char c;
wrote1 = 0;
while (ch->ch_tbc &&
READ_REG(ch->ch_base + 0x20) & 0x04) {
wrote1 = 1;
c = *ch->ch_tba++;
ch->ch_tbc--;
WRITE_REG(ch->ch_base + 0x70, c);
}
if (wrote1) {
SET(ch->ch_imr, 0x01);
WRITE_REG(ch->ch_imr_base, ch->ch_imr);
}
} else {
/*
* transmit completion interrupts already disabled,
* mark the channel tx state as done.
*/
if (ch->ch_tx_busy) {
ch->ch_tx_busy = 0;
ch->ch_tx_done = 1;
}
}
}
/* Wake up the poller. */
softint_schedule(ch->ch_si);
#ifdef RND_SBSCN
rnd_add_uint32(&ch->ch_rnd_source, isr | sr);
#endif
}
/*
* The following functions are polled getc and putc routines, shared
* by the console and kgdb glue.
*/
int
sbscn_common_getc(u_long addr, int chan)
{
int s = splhigh();
u_long base = MIPS_PHYS_TO_KSEG1(addr + (chan * 0x100));
int c;
/* block until a character becomes available */
while ((READ_REG(base + 0x20) & 0x01) == 0)
continue;
c = READ_REG(base + 0x60) & 0xff;
splx(s);
return (c);
}
void
sbscn_common_putc(u_long addr, int chan, int c)
{
int s = splhigh();
int timo;
u_long base = MIPS_PHYS_TO_KSEG1(addr + (chan * 0x100));
/* wait for any pending transmission to finish */
timo = 1500000;
while ((READ_REG(base + 0x20) & 0x08) == 0 && --timo)
continue;
WRITE_REG(base + 0x70, c);
/* wait for this transmission to complete */
timo = 15000000;
while ((READ_REG(base + 0x20) & 0x08) == 0 && --timo)
continue;
splx(s);
}
/*
* Initialize UART for use as console or KGDB line.
*/
int
sbscn_init(u_long addr, int chan, int rate, tcflag_t cflag)
{
#if 1
u_long chanregbase = MIPS_PHYS_TO_KSEG1(addr + (chan * 0x100));
u_long imaskreg = MIPS_PHYS_TO_KSEG1(addr + 0x230 + (chan * 0x20));
u_char mode1, mode2;
u_long brc;
volatile int timo;
WRITE_REG(imaskreg, 0); /* disable channel intrs */
/* XXX should we really do the following? how about only if enabled? */
/* wait for any pending transmission to finish */
timo = 1500000;
while ((READ_REG(chanregbase + 0x20) & 0x08) == 0 && --timo)
continue;
/* XXX: wait a little. THIS SHOULD NOT BE NECESSARY!!! (?) */
timo = 1500000;
while (--timo)
;
WRITE_REG(chanregbase + 0x50, 2 << 4); /* reset receiver */
WRITE_REG(chanregbase + 0x50, 3 << 4); /* reset transmitter */
/* set up the line for use */
(void)cflag2modes(cflag, &mode1, &mode2);
(void)sbscn_speed(rate, &brc);
WRITE_REG(chanregbase + 0x00, mode1);
WRITE_REG(chanregbase + 0x10, mode2);
WRITE_REG(chanregbase + 0x30, brc);
/* enable transmit and receive */
#define M_DUART_RX_EN 0x01
#define M_DUART_TX_EN 0x04
WRITE_REG(chanregbase + 0x50,M_DUART_RX_EN | M_DUART_TX_EN);
#endif
/* XXX: wait a little. THIS SHOULD NOT BE NECESSARY!!! (?) */
timo = 1500000;
while (--timo)
;
#if 0 /* XXXCGD */
bus_space_handle_t ioh;
if (bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh))
return (ENOMEM); /* ??? */
bus_space_write_1(iot, ioh, com_lcr, LCR_EERS);
bus_space_write_1(iot, ioh, com_efr, 0);
bus_space_write_1(iot, ioh, com_lcr, LCR_DLAB);
rate = comspeed(rate, frequency);
bus_space_write_1(iot, ioh, com_dlbl, rate);
bus_space_write_1(iot, ioh, com_dlbh, rate >> 8);
bus_space_write_1(iot, ioh, com_lcr, cflag2lcr(cflag));
bus_space_write_1(iot, ioh, com_mcr, MCR_DTR | MCR_RTS);
bus_space_write_1(iot, ioh, com_fifo,
FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1);
bus_space_write_1(iot, ioh, com_ier, 0);
*iohp = ioh;
return (0);
#endif /* XXXCGD */
/* XXXCGD */
return (0);
}
/*
* Following are all routines needed for sbscn to act as console
*/
int
sbscn_cnattach(u_long addr, int chan, int rate, tcflag_t cflag)
{
int res;
static struct consdev sbscn_cons = {
NULL, NULL, sbscn_cngetc, sbscn_cnputc, sbscn_cnpollc, NULL,
NULL, NULL, NODEV, CN_NORMAL
};
res = sbscn_init(addr, chan, rate, cflag);
if (res)
return (res);
cn_tab = &sbscn_cons;
sbscn_cons_present = 1;
sbscn_cons_addr = addr;
sbscn_cons_chan = chan;
sbscn_cons_rate = rate;
sbscn_cons_cflag = cflag;
return (0);
}
int
sbscn_cngetc(dev_t dev)
{
return (sbscn_common_getc(sbscn_cons_addr, sbscn_cons_chan));
}
/*
* Console kernel output character routine.
*/
void
sbscn_cnputc(dev_t dev, int c)
{
sbscn_common_putc(sbscn_cons_addr, sbscn_cons_chan, c);
}
void
sbscn_cnpollc(dev_t dev, int on)
{
}
#ifdef KGDB
int
sbscn_kgdb_attach(u_long addr, int chan, int rate, tcflag_t cflag)
{
int res;
if (!sbscn_cons_present &&
sbscn_cons_addr == addr && sbscn_cons_chan == chan)
return (EBUSY); /* cannot share with console */
res = sbscn_init(addr, chan, rate, cflag);
if (res)
return (res);
kgdb_attach(sbscn_kgdb_getc, sbscn_kgdb_putc, NULL);
kgdb_dev = 123; /* unneeded, only to satisfy some tests */
sbscn_kgdb_present = 1;
sbscn_kgdb_addr = addr;
sbscn_kgdb_chan = chan;
return (0);
}
/* ARGSUSED */
int
sbscn_kgdb_getc(void *arg)
{
return (sbscn_common_getc(sbscn_kgdb_addr, sbscn_kgdb_chan));
}
/* ARGSUSED */
void
sbscn_kgdb_putc(void *arg, int c)
{
sbscn_common_getc(sbscn_kgdb_addr, sbscn_kgdb_chan, c);
}
#endif /* KGDB */
/*
* helper function to identify the sbscn channels used by
* console or KGDB (and not yet autoconf attached)
*/
int
sbscn_is_console(u_long addr, int chan)
{
if (sbscn_cons_present && !sbscn_cons_attached &&
sbscn_cons_addr == addr && sbscn_cons_chan == chan)
return (1);
#ifdef KGDB
if (sbscn_kgdb_present && !sbscn_kgdb_attached &&
sbscn_kgdb_addr == addr && sbscn_kgdb_chan == chan)
return (1);
#endif
return (0);
}
Reference in New Issue View Git Blame Copy Permalink