mirror of
https://github.com/Stichting-MINIX-Research-Foundation/u-boot.git
synced 2025-09-08 19:47:12 -04:00
mpc83xx: cosmetic: MPC8349ITX.h checkpatch compliance
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
This commit is contained in:
Joe Hershberger
Kim Phillips
parent
32795ecad6
commit
396abba261
@ -81,7 +81,8 @@
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_MPC8349ITX
|
||||
#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */
|
||||
/* The CF card interface on the back of the board */
|
||||
#define CONFIG_COMPACT_FLASH
|
||||
#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */
|
||||
#define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */
|
||||
#define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */
|
||||
@ -118,12 +119,13 @@
|
||||
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
||||
|
||||
/* Don't probe these addresses: */
|
||||
#define CONFIG_SYS_I2C_NOPROBES {{1, CONFIG_SYS_I2C_8574_ADDR1}, \
|
||||
#define CONFIG_SYS_I2C_NOPROBES { {1, CONFIG_SYS_I2C_8574_ADDR1}, \
|
||||
{1, CONFIG_SYS_I2C_8574_ADDR2}, \
|
||||
{1, CONFIG_SYS_I2C_8574A_ADDR1}, \
|
||||
{1, CONFIG_SYS_I2C_8574A_ADDR2}}
|
||||
{1, CONFIG_SYS_I2C_8574A_ADDR2} }
|
||||
/* Bit definitions for the 8574[A] I2C expander */
|
||||
#define I2C_8574_REVISION 0x03 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */
|
||||
/* Board revision, 00=0.0, 01=0.1, 10=1.0 */
|
||||
#define I2C_8574_REVISION 0x03
|
||||
#define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */
|
||||
#define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */
|
||||
#define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */
|
||||
@ -146,7 +148,8 @@
|
||||
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0200
|
||||
#define CONFIG_SYS_ATA_STRIDE 2
|
||||
|
||||
#define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */
|
||||
/* If a CF card is not inserted, time out quickly */
|
||||
#define ATA_RESET_TIME 1
|
||||
|
||||
#endif
|
||||
|
||||
@ -190,8 +193,8 @@
|
||||
#define CONFIG_SYS_MEMTEST_START 0x1000 /* memtest region */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x2000
|
||||
|
||||
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
|
||||
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
|
||||
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \
|
||||
| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
|
||||
|
||||
#define CONFIG_VERY_BIG_RAM
|
||||
#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20)
|
||||
@ -200,9 +203,12 @@
|
||||
#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_SPD_EEPROM /* No SPD? Then manually set up DDR parameters */
|
||||
/* No SPD? Then manually set up DDR parameters */
|
||||
#ifndef CONFIG_SPD_EEPROM
|
||||
#define CONFIG_SYS_DDR_SIZE 256 /* Mb */
|
||||
#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
|
||||
#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN \
|
||||
| CSCONFIG_ROW_BIT_13 \
|
||||
| CSCONFIG_COL_BIT_10)
|
||||
|
||||
#define CONFIG_SYS_DDR_TIMING_1 0x26242321
|
||||
#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */
|
||||
@ -216,7 +222,8 @@
|
||||
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */
|
||||
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 135 /* 127 64KB sectors + 8 8KB sectors per device */
|
||||
/* 127 64KB sectors + 8 8KB sectors per device */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 135
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
||||
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
||||
@ -225,7 +232,8 @@
|
||||
boards, we say we have two, but don't display a message if we find only one. */
|
||||
#define CONFIG_SYS_FLASH_QUIET_TEST
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
|
||||
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000}
|
||||
#define CONFIG_SYS_FLASH_BANKS_LIST \
|
||||
{CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000}
|
||||
#define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */
|
||||
#define CONFIG_SYS_FLASH_SIZE_SHIFT 4 /* log2 of the above value */
|
||||
#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
|
||||
@ -249,11 +257,18 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
/* Flash */
|
||||
|
||||
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V)
|
||||
#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
|
||||
OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
|
||||
OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
|
||||
#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
|
||||
| OR_UPM_XAM \
|
||||
| OR_GPCM_CSNT \
|
||||
| OR_GPCM_ACS_DIV2 \
|
||||
| OR_GPCM_XACS \
|
||||
| OR_GPCM_SCY_15 \
|
||||
| OR_GPCM_TRLX \
|
||||
| OR_GPCM_EHTR \
|
||||
| OR_GPCM_EAD)
|
||||
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
|
||||
#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CONFIG_SYS_FLASH_SIZE_SHIFT))
|
||||
#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN \
|
||||
| (0x13 + CONFIG_SYS_FLASH_SIZE_SHIFT))
|
||||
|
||||
/* Vitesse 7385 */
|
||||
|
||||
@ -262,9 +277,14 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
#ifdef CONFIG_VSC7385_ENET
|
||||
|
||||
#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE | BR_PS_8 | BR_V)
|
||||
#define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
|
||||
OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \
|
||||
OR_GPCM_EHTR | OR_GPCM_EAD)
|
||||
#define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB \
|
||||
| OR_GPCM_CSNT \
|
||||
| OR_GPCM_XACS \
|
||||
| OR_GPCM_SCY_15 \
|
||||
| OR_GPCM_SETA \
|
||||
| OR_GPCM_TRLX \
|
||||
| OR_GPCM_EHTR \
|
||||
| OR_GPCM_EAD)
|
||||
|
||||
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_VSC7385_BASE
|
||||
#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB)
|
||||
@ -275,9 +295,14 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
|
||||
#define CONFIG_SYS_LED_BASE 0xF9000000
|
||||
#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE | BR_PS_8 | BR_V)
|
||||
#define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
|
||||
OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_TRLX | \
|
||||
OR_GPCM_EHTR | OR_GPCM_EAD)
|
||||
#define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB \
|
||||
| OR_GPCM_CSNT \
|
||||
| OR_GPCM_ACS_DIV2 \
|
||||
| OR_GPCM_XACS \
|
||||
| OR_GPCM_SCY_9 \
|
||||
| OR_GPCM_TRLX \
|
||||
| OR_GPCM_EHTR \
|
||||
| OR_GPCM_EAD)
|
||||
|
||||
/* Compact Flash */
|
||||
|
||||
@ -285,7 +310,10 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
|
||||
#define CONFIG_SYS_CF_BASE 0xF0000000
|
||||
|
||||
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V)
|
||||
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE \
|
||||
| BR_PS_16 \
|
||||
| BR_MS_UPMA \
|
||||
| BR_V)
|
||||
#define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI)
|
||||
|
||||
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CF_BASE
|
||||
@ -305,10 +333,11 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_INIT_RAM_LOCK
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
|
||||
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
||||
|
||||
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
|
||||
@ -325,8 +354,10 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
|
||||
#define CONFIG_SYS_LBC_LBCR 0x00000000
|
||||
|
||||
#define CONFIG_SYS_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
|
||||
#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/
|
||||
/* LB sdram refresh timer, about 6us */
|
||||
#define CONFIG_SYS_LBC_LSRT 0x32000000
|
||||
/* LB refresh timer prescal, 266MHz/32*/
|
||||
#define CONFIG_SYS_LBC_MRTPR 0x20000000
|
||||
|
||||
/*
|
||||
* Serial Port
|
||||
@ -365,7 +396,8 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
|
||||
#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
|
||||
#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI1_MMIO_BASE (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
|
||||
#define CONFIG_SYS_PCI1_MMIO_BASE \
|
||||
(CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
|
||||
#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
|
||||
#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
|
||||
@ -373,14 +405,17 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
#define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16M */
|
||||
|
||||
#ifdef CONFIG_MPC83XX_PCI2
|
||||
#define CONFIG_SYS_PCI2_MEM_BASE (CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE)
|
||||
#define CONFIG_SYS_PCI2_MEM_BASE \
|
||||
(CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE)
|
||||
#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE
|
||||
#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI2_MMIO_BASE (CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE)
|
||||
#define CONFIG_SYS_PCI2_MMIO_BASE \
|
||||
(CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE)
|
||||
#define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE
|
||||
#define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI2_IO_BASE 0x00000000
|
||||
#define CONFIG_SYS_PCI2_IO_PHYS (CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE)
|
||||
#define CONFIG_SYS_PCI2_IO_PHYS \
|
||||
(CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE)
|
||||
#define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */
|
||||
#endif
|
||||
|
||||
@ -442,7 +477,8 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
|
||||
#ifndef CONFIG_SYS_RAMBOOT
|
||||
#define CONFIG_ENV_IS_IN_FLASH
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
|
||||
#define CONFIG_ENV_ADDR \
|
||||
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
|
||||
#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#else
|
||||
@ -532,9 +568,11 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
|
||||
|
||||
/*
|
||||
@ -542,7 +580,8 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
* have to be in the first 256 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux*/
|
||||
/* Initial Memory map for Linux*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
|
||||
|
||||
#define CONFIG_SYS_HRCW_LOW (\
|
||||
HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
|
||||
@ -563,7 +602,7 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
HRCWH_SW_WATCHDOG_DISABLE |\
|
||||
HRCWH_ROM_LOC_LOCAL_16BIT |\
|
||||
HRCWH_TSEC1M_IN_GMII |\
|
||||
HRCWH_TSEC2M_IN_GMII )
|
||||
HRCWH_TSEC2M_IN_GMII)
|
||||
#else
|
||||
#define CONFIG_SYS_HRCW_HIGH (\
|
||||
HRCWH_PCI_HOST |\
|
||||
@ -576,7 +615,7 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
HRCWH_SW_WATCHDOG_DISABLE |\
|
||||
HRCWH_ROM_LOC_LOCAL_16BIT |\
|
||||
HRCWH_TSEC1M_IN_GMII |\
|
||||
HRCWH_TSEC2M_IN_GMII )
|
||||
HRCWH_TSEC2M_IN_GMII)
|
||||
#endif
|
||||
|
||||
/*
|
||||
@ -594,8 +633,10 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
/*
|
||||
* System IO Config
|
||||
*/
|
||||
#define CONFIG_SYS_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */
|
||||
#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) /* USB DR as device + USB MPH as host */
|
||||
/* Needed for gigabit to work on TSEC 1 */
|
||||
#define CONFIG_SYS_SICRH SICRH_TSOBI1
|
||||
/* USB DR as device + USB MPH as host */
|
||||
#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)
|
||||
|
||||
#define CONFIG_SYS_HID0_INIT 0x00000000
|
||||
#define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE
|
||||
@ -604,15 +645,31 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
||||
|
||||
/* DDR */
|
||||
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \
|
||||
| BATL_PP_10 \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
|
||||
/* PCI */
|
||||
#ifdef CONFIG_PCI
|
||||
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \
|
||||
| BATL_PP_10 \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \
|
||||
| BATL_PP_10 \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#else
|
||||
#define CONFIG_SYS_IBAT1L 0
|
||||
#define CONFIG_SYS_IBAT1U 0
|
||||
@ -621,10 +678,21 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MPC83XX_PCI2
|
||||
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE \
|
||||
| BATL_PP_10 \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE \
|
||||
| BATL_PP_10 \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#else
|
||||
#define CONFIG_SYS_IBAT3L 0
|
||||
#define CONFIG_SYS_IBAT3U 0
|
||||
@ -633,13 +701,24 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
#endif
|
||||
|
||||
/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
|
||||
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \
|
||||
| BATL_PP_10 \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
|
||||
/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
|
||||
#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE | \
|
||||
BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT6L (0xF0000000 \
|
||||
| BATL_PP_10 \
|
||||
| BATL_MEMCOHERENCE \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT6U (0xF0000000 \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
|
||||
#define CONFIG_SYS_IBAT7L 0
|
||||
#define CONFIG_SYS_IBAT7U 0
|
||||
@ -672,23 +751,24 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
*/
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
#define CONFIG_NETDEV eth0
|
||||
#define CONFIG_NETDEV "eth0"
|
||||
|
||||
#ifdef CONFIG_MPC8349ITX
|
||||
#define CONFIG_HOSTNAME mpc8349emitx
|
||||
#define CONFIG_HOSTNAME "mpc8349emitx"
|
||||
#else
|
||||
#define CONFIG_HOSTNAME mpc8349emitxgp
|
||||
#define CONFIG_HOSTNAME "mpc8349emitxgp"
|
||||
#endif
|
||||
|
||||
/* Default path and filenames */
|
||||
#define CONFIG_ROOTPATH "/nfsroot/rootfs"
|
||||
#define CONFIG_BOOTFILE "uImage"
|
||||
#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
|
||||
/* U-Boot image on TFTP server */
|
||||
#define CONFIG_UBOOTPATH "u-boot.bin"
|
||||
|
||||
#ifdef CONFIG_MPC8349ITX
|
||||
#define CONFIG_FDTFILE mpc8349emitx.dtb
|
||||
#define CONFIG_FDTFILE "mpc8349emitx.dtb"
|
||||
#else
|
||||
#define CONFIG_FDTFILE mpc8349emitxgp.dtb
|
||||
#define CONFIG_FDTFILE "mpc8349emitxgp.dtb"
|
||||
#endif
|
||||
|
||||
#define CONFIG_BOOTDELAY 6
|
||||
@ -701,25 +781,25 @@ boards, we say we have two, but don't display a message if we find only one. */
|
||||
" nfsroot=" MK_STR(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH \
|
||||
" ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \
|
||||
MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \
|
||||
MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \
|
||||
CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \
|
||||
" console=" MK_STR(CONFIG_CONSOLE) "," MK_STR(CONFIG_BAUDRATE)
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"console=" MK_STR(CONFIG_CONSOLE) "\0" \
|
||||
"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
|
||||
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
|
||||
"netdev=" CONFIG_NETDEV "\0" \
|
||||
"uboot=" CONFIG_UBOOTPATH "\0" \
|
||||
"tftpflash=tftpboot $loadaddr $uboot; " \
|
||||
"protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
|
||||
"protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
|
||||
"erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
|
||||
"cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
|
||||
"protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
|
||||
"cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
|
||||
"cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "\
|
||||
"protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
|
||||
"cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"\
|
||||
"fdtaddr=780000\0" \
|
||||
"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"
|
||||
"fdtfile=" CONFIG_FDTFILE "\0"
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \
|
||||
" ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
" ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\
|
||||
" console=$console,$baudrate $othbootargs; " \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user