minix/u-boot
1
0
Fork 0
mirror of https://github.com/Stichting-MINIX-Research-Foundation/u-boot.git synced 2025-09-10 12:39:22 -04:00
Code Issues Packages Projects Releases Wiki Activity

Armada100: Enable 88E3015 PHY support for GplugD

Browse Source 
This patch adds support for 88E3015 PHY for Marvell GplugD board.
This patch depends on series of patch which adds support for Marvell
GuruPlug-Display.

Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
This commit is contained in:
Ajay Bhargav 2011-09-13 22:22:13 +05:30 committed by Albert ARIBAUD
parent aa0ecfeb9d
commit 47e75d72bc
2 changed files with 47 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
board/Marvell/gplugd/gplugd.c
View File

@ -32,6 +32,8 @@
#include <mvmfp.h> #include <mvmfp.h>
#include <asm/arch/mfp.h> #include <asm/arch/mfp.h>
#include <asm/arch/armada100.h> #include <asm/arch/armada100.h>
#include <asm/gpio.h>
#include <miiphy.h>
#ifdef CONFIG_ARMADA100_FEC #ifdef CONFIG_ARMADA100_FEC
#include <net.h> #include <net.h>
@ -83,6 +85,11 @@ int board_init(void)
gd->bd->bi_arch_number = MACH_TYPE_SHEEVAD; gd->bd->bi_arch_number = MACH_TYPE_SHEEVAD;
/* adress of boot parameters */ /* adress of boot parameters */
gd->bd->bi_boot_params = armd1_sdram_base(0) + 0x100; gd->bd->bi_boot_params = armd1_sdram_base(0) + 0x100;
/* Assert PHY_RST# */
gpio_direction_output(CONFIG_SYS_GPIO_PHY_RST, GPIO_LOW);
udelay(10);
/* Deassert PHY_RST# */
gpio_set_value(CONFIG_SYS_GPIO_PHY_RST, GPIO_HIGH);
return 0; return 0;
} }
@ -97,4 +104,30 @@ int board_eth_init(bd_t *bis)
return armada100_fec_register(ARMD1_FEC_BASE); return armada100_fec_register(ARMD1_FEC_BASE);
} }
#ifdef CONFIG_RESET_PHY_R
/* Configure and initialize PHY chip 88E3015 */
void reset_phy(void)
{
u16 phy_adr;
const char *name = "armd-fec0";
if (miiphy_set_current_dev(name))
return;
/* command to read PHY dev address */
if (miiphy_read(name, 0xff, 0xff, &phy_adr)) {
printf("Err..%s could not read PHY dev address\n", __func__);
return;
}
/* Set Ethernet LED in TX blink mode */
miiphy_write(name, phy_adr, PHY_LED_MAN_REG, 0x00);
miiphy_write(name, phy_adr, PHY_LED_PAR_SEL_REG, PHY_LED_VAL);
/* reset the phy */
miiphy_reset(name, phy_adr);
debug("88E3015 Initialized on %s\n", name);
}
#endif /* CONFIG_RESET_PHY_R */
#endif /* CONFIG_ARMADA100_FEC */ #endif /* CONFIG_ARMADA100_FEC */

14
include/configs/gplugd.h
View File

@ -77,6 +77,20 @@
#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
#endif /* CONFIG_CMD_NET */ #endif /* CONFIG_CMD_NET */
/* GPIO Support */
#define CONFIG_MARVELL_GPIO
/* PHY configuration */
#define CONFIG_MII
#define CONFIG_CMD_MII
#define CONFIG_RESET_PHY_R
/* 88E3015 register definition */
#define PHY_LED_PAR_SEL_REG 22
#define PHY_LED_MAN_REG 25
#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
/* GPIO Configuration for PHY */
#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
/* /*
* mv-common.h should be defined after CMD configs since it used them * mv-common.h should be defined after CMD configs since it used them
* to enable certain macros * to enable certain macros