minix/u-boot
1
0
Fork 0
mirror of https://github.com/Stichting-MINIX-Research-Foundation/u-boot.git synced 2025-09-10 12:39:22 -04:00
Code Issues Packages Projects Releases Wiki Activity

update/fix AcTux1 board

Browse Source 
Signed-off-by: Michael Schwingen <michael@schwingen.org>
This commit is contained in:
Michael Schwingen 2011-05-23 00:00:04 +02:00 committed by Albert ARIBAUD
parent 66463e60df
commit 517c5dfed5
5 changed files with 124 additions and 93 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
board/actux1/actux1.c
View File

@ -37,11 +37,26 @@
#include <asm/arch/ixp425.h> #include <asm/arch/ixp425.h>
#include <asm/io.h> #include <asm/io.h>
#include <miiphy.h> #include <miiphy.h>
#ifdef CONFIG_PCI
#include <pci.h>
#include <asm/arch/ixp425pci.h>
#endif
#include "actux1_hw.h" #include "actux1_hw.h"
DECLARE_GLOBAL_DATA_PTR; DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
/* CS5: Debug port */
writel(0x9d520003, IXP425_EXP_CS5);
/* CS6: HwRel */
writel(0x81860001, IXP425_EXP_CS6);
/* CS7: LEDs */
writel(0x80900003, IXP425_EXP_CS7);
return 0;
}
int board_init(void) int board_init(void)
{ {
gd->bd->bi_arch_number = MACH_TYPE_ACTUX1; gd->bd->bi_arch_number = MACH_TYPE_ACTUX1;
@ -52,21 +67,14 @@ int board_init (void)
GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST);
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST); GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST);
/* Setup GPIO's for PCI INTA */ /* Setup GPIOs for PCI INTA */
GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI1_INTA); GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI1_INTA);
GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI1_INTA); GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI1_INTA);
/* Setup GPIO's for 33MHz clock output */ /* Setup GPIOs for 33MHz clock output */
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
*IXP425_GPIO_GPCLKR = 0x011001FF; writel(0x011001FF, IXP425_GPIO_GPCLKR);
/* CS5: Debug port */
*IXP425_EXP_CS5 = 0x9d520003;
/* CS6: HwRel */
*IXP425_EXP_CS6 = 0x81860001;
/* CS7: LEDs */
*IXP425_EXP_CS7 = 0x80900003;
udelay(533); udelay(533);
GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST);
@ -101,7 +109,7 @@ int checkboard (void)
} }
putc('\n'); putc('\n');
return (0); return 0;
} }
/************************************************************************* /*************************************************************************
@ -117,19 +125,16 @@ u32 get_board_rev (void)
int dram_init(void) int dram_init(void)
{ {
gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20);
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; return 0;
return (0);
} }
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
extern struct pci_controller hose; #ifdef CONFIG_PCI
extern void pci_ixp_init (struct pci_controller *hose); struct pci_controller hose;
void pci_init_board(void) void pci_init_board(void)
{ {
extern void pci_ixp_init (struct pci_controller *hose);
pci_ixp_init(&hose); pci_ixp_init(&hose);
} }
#endif #endif

4
board/actux1/config.mk
View File

@ -1,4 +0,0 @@
CONFIG_SYS_TEXT_BASE = 0x00e00000
# include NPE ethernet driver
BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o

37
board/actux1/u-boot.lds
View File

@ -30,15 +30,15 @@ SECTIONS
. = ALIGN (4); . = ALIGN (4);
.text : { .text : {
arch/arm/cpu/ixp/start.o(.text) arch/arm/cpu/ixp/start.o(.text*)
lib/string.o(.text) net/libnet.o(.text*)
lib/vsprintf.o(.text) board/actux1/libactux1.o(.text*)
arch/arm/lib/board.o(.text) arch/arm/cpu/ixp/libixp.o(.text*)
common/dlmalloc.o(.text) drivers/serial/libserial.o(.text*)
arch/arm/cpu/ixp/cpu.o(.text)
. = env_offset; . = env_offset;
common/env_embedded.o(.ppcenv) common/env_embedded.o(.ppcenv)
* (.text) *(.text*)
} }
. = ALIGN (4); . = ALIGN (4);
@ -47,7 +47,7 @@ SECTIONS
} }
. = ALIGN (4); . = ALIGN (4);
.data : { .data : {
*(.data) *(.data*)
} }
. = ALIGN (4); . = ALIGN (4);
.got : { .got : {
@ -61,10 +61,27 @@ SECTIONS
__u_boot_cmd_end =.; __u_boot_cmd_end =.;
. = ALIGN (4); . = ALIGN (4);
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
__rel_dyn_end = .;
}
.dynsym : {
__dynsym_start = .;
*(.dynsym)
}
.bss __rel_dyn_start (OVERLAY) : {
__bss_start = .; __bss_start = .;
.bss (NOLOAD): { *(.bss*)
*(.bss)
. = ALIGN(4); . = ALIGN(4);
_end = .;
} }
__bss_end__ =.; __bss_end__ =.;
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
/DISCARD/ : { *(.interp*) }
/DISCARD/ : { *(.gnu*) }
} }

5
boards.cfg
View File

@ -164,7 +164,10 @@ smdkv310 arm armv7 smdkv310 samsung s5pc2xx
harmony arm armv7 harmony nvidia tegra2 harmony arm armv7 harmony nvidia tegra2
seaboard arm armv7 seaboard nvidia tegra2 seaboard arm armv7 seaboard nvidia tegra2
u8500_href arm armv7 u8500 st-ericsson u8500 u8500_href arm armv7 u8500 st-ericsson u8500
actux1 arm ixp actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2
actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8
actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB
actux1_8_32 arm ixp actux1 - - actux1:FLASH1X8,RAM_32MB
actux2 arm ixp actux2 arm ixp
actux3 arm ixp actux3 arm ixp
actux4 arm ixp actux4 arm ixp

60
include/configs/actux1.h
View File

@ -26,13 +26,6 @@
#ifndef __CONFIG_H #ifndef __CONFIG_H
#define __CONFIG_H #define __CONFIG_H
/* 1: modified board with 32MB DRAM */
#define CONFIG_ACTUX1_32MB 0
/* 1: 2*2MB FLASH (standard) */
#define CONFIG_ACTUX1_FLASH2X2 1
/* 1: 1*8MB FLASH (upgraded boards) */
#define CONFIG_ACTUX1_FLASH1X8 0
#define CONFIG_IXP425 1 #define CONFIG_IXP425 1
#define CONFIG_ACTUX1 1 #define CONFIG_ACTUX1 1
@ -44,12 +37,12 @@
#define CONFIG_BAUDRATE 115200 #define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_BOARD_EARLY_INIT_F 1
#define CONFIG_SYS_LDSCRIPT "board/actux1/u-boot.lds"
/*************************************************************** /***************************************************************
* U-boot generic defines start here. * U-boot generic defines start here.
***************************************************************/ ***************************************************************/
#undef CONFIG_USE_IRQ
/* /*
* Size of malloc() pool * Size of malloc() pool
*/ */
@ -62,8 +55,13 @@
#include <config_cmd_default.h> #include <config_cmd_default.h>
#define CONFIG_CMD_ELF #define CONFIG_CMD_ELF
#undef CONFIG_CMD_PCI #ifdef CONFIG_PCI
#undef CONFIG_PCI #define CONFIG_CMD_PCI
#define CONFIG_PCI_PNP
#define CONFIG_IXP_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_CMD_PCI_ENUM
#endif
#define CONFIG_BOOTCOMMAND "run boot_flash" #define CONFIG_BOOTCOMMAND "run boot_flash"
/* enable passing of ATAGs */ /* enable passing of ATAGs */
@ -93,8 +91,9 @@
#define CONFIG_SYS_MEMTEST_START 0x00400000 #define CONFIG_SYS_MEMTEST_START 0x00400000
#define CONFIG_SYS_MEMTEST_END 0x00800000 #define CONFIG_SYS_MEMTEST_END 0x00800000
/* spec says 66.666 MHz, but it appears to be 33 */ /* timer clock - 2* OSC_IN system clock */
#define CONFIG_SYS_HZ 3333333 #define CONFIG_IXP425_TIMER_CLK 66666666
#define CONFIG_SYS_HZ 1000
/* default load address */ /* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x00010000 #define CONFIG_SYS_LOAD_ADDR 0x00010000
@ -109,10 +108,6 @@
* The stack sizes are set up in start.S using the settings below * The stack sizes are set up in start.S using the settings below
*/ */
#define CONFIG_STACKSIZE (128*1024) /* regular stack */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
# define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
# define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif
/* Expansion bus settings */ /* Expansion bus settings */
#define CONFIG_SYS_EXP_CS0 0xbd113842 #define CONFIG_SYS_EXP_CS0 0xbd113842
@ -120,9 +115,9 @@
/* SDRAM settings */ /* SDRAM settings */
#define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x00000000 #define PHYS_SDRAM_1 0x00000000
#define CONFIG_SYS_DRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE 0x00000000
#if CONFIG_ACTUX1_32MB #ifdef CONFIG_RAM_32MB
# define CONFIG_SYS_SDR_CONFIG 0x18 # define CONFIG_SYS_SDR_CONFIG 0x18
# define PHYS_SDRAM_1_SIZE 0x02000000 # define PHYS_SDRAM_1_SIZE 0x02000000
# define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a # define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
@ -136,8 +131,11 @@
# define CONFIG_SYS_DRAM_SIZE 0x01000000 # define CONFIG_SYS_DRAM_SIZE 0x01000000
#endif #endif
/* FLASH organization */ /* FLASH organization */
#if CONFIG_ACTUX1_FLASH2X2 #define CONFIG_SYS_TEXT_BASE 0x50000000
#ifdef CONFIG_FLASH2X2
# define CONFIG_SYS_MAX_FLASH_BANKS 2 # define CONFIG_SYS_MAX_FLASH_BANKS 2
/* max number of sectors on one chip */ /* max number of sectors on one chip */
# define CONFIG_SYS_MAX_FLASH_SECT 40 # define CONFIG_SYS_MAX_FLASH_SECT 40
@ -145,7 +143,7 @@
# define PHYS_FLASH_2 0x50200000 # define PHYS_FLASH_2 0x50200000
# define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } # define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
#endif #endif
#if CONFIG_ACTUX1_FLASH1X8 #ifdef CONFIG_FLASH1X8
# define CONFIG_SYS_MAX_FLASH_BANKS 1 # define CONFIG_SYS_MAX_FLASH_BANKS 1
/* max number of sectors on one chip */ /* max number of sectors on one chip */
# define CONFIG_SYS_MAX_FLASH_SECT 140 # define CONFIG_SYS_MAX_FLASH_SECT 140
@ -156,6 +154,7 @@
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
#define CONFIG_SYS_MONITOR_LEN (256 << 10) #define CONFIG_SYS_MONITOR_LEN (256 << 10)
#define CONFIG_BOARD_SIZE_LIMIT 262144
/* Use common CFI driver */ /* Use common CFI driver */
#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI
@ -172,12 +171,16 @@
#define CONFIG_NET_MULTI 1 #define CONFIG_NET_MULTI 1
/* NPE0 PHY address */ /* NPE0 PHY address */
#define CONFIG_PHY_ADDR 0 #define CONFIG_PHY_ADDR 0
/* NPE1 PHY address (HW Release E only) */
#define CONFIG_PHY1_ADDR 1
/* MII PHY management */ /* MII PHY management */
#define CONFIG_MII 1 #define CONFIG_MII 1
/* Number of ethernet rx buffers & descriptors */ /* Number of ethernet rx buffers & descriptors */
#define CONFIG_SYS_RX_ETH_BUFFER 16 #define CONFIG_SYS_RX_ETH_BUFFER 16
#define CONFIG_RESET_PHY_R 1 #define CONFIG_RESET_PHY_R 1
#define CONFIG_HAS_ETH1 1
#define CONFIG_CMD_DHCP #define CONFIG_CMD_DHCP
#define CONFIG_CMD_NET #define CONFIG_CMD_NET
#define CONFIG_CMD_MII #define CONFIG_CMD_MII
@ -206,13 +209,15 @@
"npe_ucode=50040000\0" \ "npe_ucode=50040000\0" \
"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \ "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
"kerneladdr=50050000\0" \ "kerneladdr=50050000\0" \
"kernelfile=actux1/uImage\0" \
"rootfile=actux1/rootfs\0" \
"rootaddr=50170000\0" \ "rootaddr=50170000\0" \
"loadaddr=10000\0" \ "loadaddr=10000\0" \
"updateboot_ser=mw.b 10000 ff 40000;" \ "updateboot_ser=mw.b 10000 ff 40000;" \
" loady ${loadaddr};" \ " loady ${loadaddr};" \
" run eraseboot writeboot\0" \ " run eraseboot writeboot\0" \
"updateboot_net=mw.b 10000 ff 40000;" \ "updateboot_net=mw.b 10000 ff 40000;" \
" tftp ${loadaddr} u-boot.bin;" \ " tftp ${loadaddr} actux1/u-boot.bin;" \
" run eraseboot writeboot\0" \ " run eraseboot writeboot\0" \
"eraseboot=protect off 50000000 50003fff;" \ "eraseboot=protect off 50000000 50003fff;" \
" protect off 50006000 5003ffff;" \ " protect off 50006000 5003ffff;" \
@ -220,8 +225,9 @@
" erase 50006000 5003ffff\0" \ " erase 50006000 5003ffff\0" \
"writeboot=cp.b 10000 50000000 4000;" \ "writeboot=cp.b 10000 50000000 4000;" \
" cp.b 16000 50006000 3a000\0" \ " cp.b 16000 50006000 3a000\0" \
"eraseenv=protect off 50004000 50005fff;" \ "updateucode=loady;" \
" erase 50004000 50005fff\0" \ " era ${npe_ucode} +${filesize};" \
" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
"updateroot=tftp ${loadaddr} ${rootfile};" \ "updateroot=tftp ${loadaddr} ${rootfile};" \
" era ${rootaddr} +${filesize};" \ " era ${rootaddr} +${filesize};" \
" cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \ " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
@ -232,7 +238,7 @@
" rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
" rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \
"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
"boot_flash=run flashargs addtty addeth;" \ "boot_flash=run flashargs addtty addeth;" \
" bootm ${kerneladdr}\0" \ " bootm ${kerneladdr}\0" \
@ -240,4 +246,8 @@
" tftpboot ${loadaddr} ${kernelfile};" \ " tftpboot ${loadaddr} ${kernelfile};" \
" bootm\0" " bootm\0"
/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */ #endif /* __CONFIG_H */