Thomas Chou 22d6c8faac cfi_flash: reset timer in flash status check ...

This patch adds reset_timer() before the flash status check
waiting loop.

Since the timer is basically running asynchronous to the cfi
code, it is possible to call get_timer(0), then only a few
_SYSCLK_ cycles later an interrupt is generated. This causes
timeout even though much less time has elapsed. So the timer
period registers should be reset before get_timer(0) is
called.

There is similar usage in nand_base.c.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Stefan Roese <sr@denx.de>

2010-04-07 11:33:16 +02:00

..

nand

at91: add hwecc method for nand

2010-03-23 14:29:09 -05:00

onenand

Flex-OneNAND driver support

2009-11-13 16:56:18 -06:00

spi

sf: fix stmicro offset setup while erasing

2009-11-22 23:56:36 +01:00

ubi

UBI: Fix build problem noticed on Apollon (arm/testing repo)

2009-07-07 16:33:44 +02:00

at45.c

drivers/mtd: Move conditional compilation to Makefile

2008-08-13 01:40:42 +02:00

cfi_flash.c

cfi_flash: reset timer in flash status check

2010-04-07 11:33:16 +02:00

cfi_mtd.c

CFI: fix eraseregions numblocks

2010-02-02 08:22:00 +01:00

dataflash.c

mtd/dataflash.c: fix a problem with the last partition

2008-12-02 21:53:24 +01:00

jedec_flash.c

Support up to 7 banks for ids as specified in JEDEC JEP106Z

2009-08-26 08:58:27 +02:00

Makefile

mod change 755 => 644 for multiple files

2010-03-21 22:22:53 +01:00

mtdconcat.c

mtd: Add MTD concat support to concatenate multiple MTD NOR devices

2009-06-12 20:45:47 +02:00

mtdcore.c

mtd: Remove a printf() from add_mtd_device().

2008-11-24 11:29:53 +01:00

mtdpart.c

mtd: Update MTD infrastructure to support 64bit device size

2009-06-12 20:45:47 +02:00

mw_eeprom.c

Update i386 code (sc520_cdp)

2008-09-09 11:48:53 +02:00

spr_smi.c

mod change 755 => 644 for multiple files

2010-03-21 22:22:53 +01:00