SRICHARAN R 8e70691acc U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
All ddr configurations(geometry/timings) are done automatically
by detecting the device connected at run time. Though this
is a useful feature, making this as a default setting increases
the code size by about 2K bytes. This is quite big, especially
in the case of SPL which runs from a smaller SRAM. So do not
use this feature as the default setting, instead use the
precalculated tables.

Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27 21:56:34 +02:00
..
2011-10-17 22:25:34 +02:00
2011-08-01 15:19:40 +02:00
2011-08-04 23:34:02 +02:00
2011-08-01 15:19:40 +02:00
2011-07-11 13:24:20 -05:00
2011-10-22 01:22:21 +02:00
2011-10-26 21:40:44 +02:00
2011-08-04 23:34:02 +02:00
2011-10-26 21:39:40 +02:00
2011-08-01 15:19:40 +02:00
2011-09-05 11:41:42 +02:00
2011-09-10 00:04:01 +02:00
2011-09-30 22:00:54 +02:00
2011-10-17 23:56:58 +02:00
2011-07-26 14:10:14 +02:00
2011-10-27 21:56:31 +02:00
2011-10-05 22:03:11 +02:00
2011-07-15 20:29:18 -05:00
2011-08-04 23:34:02 +02:00
2011-08-04 23:34:02 +02:00
2011-08-01 15:19:40 +02:00
2011-08-01 15:19:40 +02:00
2011-07-26 16:29:27 +02:00
2011-09-30 22:00:55 +02:00
2011-08-01 15:19:40 +02:00
2011-08-01 15:19:40 +02:00