roy zang 4c52783b3d General code modification for mpc7448hpc2 board support. ...

1. Add 7447A and 7448 processor support.
2. Add the following flags.

CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
(such as by switch on board), this flag should be set.

CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
relocates to RAM, this flag should be set.

CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
system hang in exception, this flag should be set.

There is a design issue for tsi108/109 pci configure  read. When pci scan
the slots, if there is no pci card, the tsi108/9 will cause a machine
check exception for mpc7448 processor.

Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

2006-11-02 18:49:51 +08:00

..

cache.S

* Patch by Jim Sandoz, 07 Nov 2002:

2002-11-11 21:14:20 +00:00

config.mk

* Code cleanup, mostly for GCC-3.3.x

2004-12-31 09:32:47 +00:00

cpu_init.c

General code modification for mpc7448hpc2 board support.

2006-11-02 18:49:51 +08:00

cpu.c

General code modification for mpc7448hpc2 board support.

2006-11-02 18:49:51 +08:00

interrupts.c

* Patch by Gleb Natapov, 19 Sep 2003:

2003-12-06 19:49:23 +00:00

io.S

Initial revision

2002-01-15 18:58:11 +00:00

kgdb.S

* Patch by Yuli Barcohen, 19 Jul 2004:

2004-09-28 21:39:45 +00:00

Makefile

Move "ar" flags to config.mk to allow for silent "make -s"

2006-10-09 01:02:05 +02:00

speed.c

General code modification for mpc7448hpc2 board support.

2006-11-02 18:49:51 +08:00

start.S

Add support for wrPPMC7xx/74xx boards

2006-06-19 11:02:41 +02:00

traps.c

GCC-4.x fixes: clean up global data pointer initialization for all boards.

2006-03-31 18:32:53 +02:00