Dirk Behme 9d4fc99dbd OMAP3: Fix CKE1 MUX setting to allow self-refresh ...

The Beagle rev Cx and Overo boards are using both SDRC CSes. The MUX
setting is needed for the second CS clock signal to allow the 2 RAM
parts to be put in self-refresh correctly. This also works on rev B
Beagle boards with 128M of RAM.

From: Steve Sakoman <steve@sakoman.com>
From: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

2009-06-12 20:39:53 +02:00

..

config.mk

OMAP3: Add Overo board

2009-01-28 21:39:57 +01:00

Makefile

OMAP3: Overo: Clean up pin mux and GPIO configuration

2009-02-22 18:29:10 +01:00

overo.c

OMAP3 Fix multiline formatting in board init files.

2009-04-05 00:30:38 +02:00

overo.h

OMAP3: Fix CKE1 MUX setting to allow self-refresh

2009-06-12 20:39:53 +02:00