SRICHARAN R d417d1db5f OMAP3+: reset: Create a common reset layer. ...

The reset.S has the function to do a warm reset on OMAP
based socs. Moving this to a reset.c file so that this
acts a common layer to add any reset related functionality
for the future.

Signed-off-by: R Sricharan <r.sricharan@ti.com>

2012-05-15 08:31:25 +02:00

..

boot-common.c

ARM:AM33XX: Add SPL support for AM335X EVM

2012-01-16 08:40:12 +01:00

clocks-common.c

OMAP5: palmas: Configure nominal opp vdd values

2012-05-15 08:31:23 +02:00

config.mk

Reduce build times

2011-11-03 20:44:58 +01:00

emif-common.c

OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.

2012-05-15 08:31:23 +02:00

gpio.c

gpio: Replace ARM gpio.h with the common API in include/asm-generic

2012-01-09 20:10:32 -06:00

hwinit-common.c

OMAP4/5: device: Add support to get the device type.

2012-05-15 08:31:24 +02:00

lowlevel_init.S

omap4/5: Add support for booting with CH.

2011-11-15 22:25:50 +01:00

Makefile

OMAP3+: Introduce generic logic for OMAP voltage controller

2012-05-15 08:31:22 +02:00

mem-common.c

omap4: make omap4 code common for future reuse

2011-11-15 22:25:50 +01:00

reset.c

OMAP3+: reset: Create a common reset layer.

2012-05-15 08:31:25 +02:00

spl_mmc.c

arm: omap5: correct boot device mode7 for eMMC

2012-05-15 08:31:25 +02:00

spl_nand.c

CMD: Fix CONFIG_CMD_SAVEBP_WRITE_SIZE -> CONFIG_CMD_SPL_WRITE_SIZE

2012-04-19 22:01:13 +02:00

spl_ymodem.c

SPL: Add YMODEM over UART load support

2012-03-26 23:09:25 +02:00

spl.c

arm: omap5: correct boot device mode7 for eMMC

2012-05-15 08:31:25 +02:00

timer.c

Timer: Remove reset_timer_masked()

2011-07-26 14:54:15 +02:00

u-boot-spl.lds

omap: add basic SPL support

2011-08-03 12:49:20 +02:00

utils.c

omap4: calculate EMIF register values

2011-08-03 12:49:19 +02:00

vc.c

OMAP3+: Introduce generic logic for OMAP voltage controller

2012-05-15 08:31:22 +02:00