oneechanhax/phunix
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Joren l'Ami 's patch to check for <16MB

Browse Source
This commit is contained in:
Ben Gras 2005-09-05 18:01:56 +00:00
parent 66b48eea33
commit f0cc130f18
1 changed files with 17 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
drivers/lance/lance.c
View File

@ -38,7 +38,7 @@
* |------------|---------|-----------|---------------|
*
* Created: Jul 27, 2002 by Kazuya Kodama <kazuya@nii.ac.jp>
*
* Adapted for Minix 3: Sep 05, 2005 by Joren l'Ami <jwlami@cs.vu.nl>
*/
#define VERBOSE 0
@ -59,7 +59,7 @@
#include <sys/ioc_memory.h>
/* Joren l'Ami */
/* new I/O functions in Minix 3 */
#define out_byte( x, y ) sys_outb( x, y )
#define out_word( x, y ) sys_outw( x, y )
@ -84,7 +84,6 @@ static U16_t in_word( U16_t port)
#define in_byte( x ) inb( x )
#define in_word( x ) inw( x )
*/
/* Joren l'Ami */
static ether_card_t ec_table[EC_PORT_NR_MAX];
static int eth_tasknr= ANY;
@ -181,6 +180,7 @@ _PROTOTYPE( static void lance_init_card, (ether_card_t *ec) );
#define Address unsigned long
/* Minix 3 */
#define virt_to_bus(x) (vir2phys((unsigned long)x))
unsigned long vir2phys( unsigned long x )
{
@ -193,6 +193,10 @@ unsigned long vir2phys( unsigned long x )
return value;
}
/* DMA limitations */
#define DMA_ADDR_MASK 0xFFFFFF /* mask to verify DMA address is 24-bit */
#define CORRECT_DMA_MEM() ( (virt_to_bus(lance + sizeof(lance)) & ~DMA_ADDR_MASK) == 0 )
#define ETH_FRAME_LEN 1518
@ -435,8 +439,6 @@ static void lance_dump()
printf("irq = %d\tioadr = %d\n", ec->ec_irq, ec->ec_port);
}
printf("virt_to_bus(begin) = 0x%x\t virt_to_bus(end) = 0x%x\n",
virt_to_bus(lance), virt_to_bus(lance + sizeof(lance)) );
}
/*===========================================================================*
@ -488,7 +490,16 @@ pci_init();
if (ec->mode == EC_DISABLED)
{
/* This is the default, try to (re)locate the device. */
conf_hw(ec);
/* only try to enable if memory is correct for DMA */
if ( CORRECT_DMA_MEM() )
{
conf_hw(ec);
}
else
{
report( "LANCE", "DMA denied because address out of range", NO_NUM );
}
if (ec->mode == EC_DISABLED)
{
/* Probe failed, or the device is configured off. */