IMPORTANT: this change has a docs/UPDATING entry!
This patch performs an initial import of the infrastructure and a
subset of the NetBSD set of rc startup and shutdown scripts. The
"initial" refers to the fact that this is not yet a full switch to the
NetBSD rc system: the MINIX ramdisk rc script, which (typically) runs
as the first thing, is kept as is. After mounting the root file
system, the ramdisk rc script will start the NetBSD rc infrastructure
by invoking /etc/rc, however. The regular MINIX startup-and-shutdown
script has been moved from /etc/rc to /etc/rc.minix, and is now
invoked as part of the NetBSD rc infrastructure through a bridge rc
script /etc/rc.d/minixrc. /etc/rc.minix invokes /usr/etc/rc as before.
Switching over the ramdisk to the NetBSD system and decomposing the
MINIX rc.minix script into smaller components are left to future work.
Also, the current pkgsrc etc/rc.d auto-start functionality is left as
is, even though it should be removed (see the etc/usr/rc comment).
Change-Id: Ia96cae7c426e94b85c67978dc1307dacc4b09fc5
IMPORTANT: this change has a docs/UPDATING entry!
This rename is unfortunately necessary because NetBSD has decided to
create its own service(8) utility, and we will want to import theirs
as well. The two can obviously not coexist.
Also move ours from /bin to /sbin, as it is a superuser-only utility.
Change-Id: Ic6e46ffb3a84b4747d2fdcb0d74e62dbea065039
Scripts for generating boot-to-ramdisk images are now available. These
can be used for example to boot from PXE or from a USB stick, as the
ramdisk are self-contained and do not rely on any block devices after
being loaded into RAM.
The image generation framework has also been slightly cleaned up in
order to better accomodate tarball sets bundling in images.
Change-Id: I65a176832bd0d6954b430fa8305f90af0bd606c1
The new MIB service implements the sysctl(2) system call which, as
we adopt more NetBSD code, is an increasingly important part of the
operating system API. The system call is implemented in the new
service rather than as part of an existing service, because it will
eventually call into many other services in order to gather data,
similar to ProcFS. Since the sysctl(2) functionality is used even
by init(8), the MIB service is added to the boot image.
MIB stands for Management Information Base, and the MIB service
should be seen as a knowledge base of management information.
The MIB service implementation of the sysctl(2) interface is fairly
complete; it incorporates support for both static and dynamic nodes
and imitates many NetBSD-specific quirks expected by userland. The
patch also adds trace(1) support for the new system call, and adds
a new test, test87, which tests the fundamental operation of the
MIB service rather thoroughly.
Change-Id: I4766b410b25e94e9cd4affb72244112c2910ff67
The CD now boots directly from the ISO 9660 filesystem instead of using
MBR partitioning with Minix file systems. This saves some space on the
CD and reduces memory requirements by some unknown amount as the root
ramdisk is completely eliminated.
The x86 hard drive image creation is also rewritten in the same
fashion.
The setup is modified to be more NetBSD-like (unpacking sets
tarballs instead of blindly copying the CD contents). Splitting MINIX
into sets is done in another commit due to it being a nightmare to
rebase.
Since MINIX lacks union mounts for now, a bunch of ramdisks are
generated at run-time to make parts of the filesystem writeable for the
CD. This solution isn't ideal, but it's enough for an installation CD.
Change-Id: Icbd9cca4dafebf7b42c345b107a17679a622d5cd
This concerns all services, a.k.a drivers, filesystem drivers, network
(inet, lwip, uds) servers, and the system servers.
Change-Id: I626fd15c795e15af42df2d10d47fb4a703665d63
import/switch of:
init, getty, reboot, halt, shutdown, wall, last
changes:
. change reboot() call to netbsd prototype and args
. allows pristine <utmp.h>
. use clean <sys/reboot.h> instead of <minix/reboot.h>
. implement TIOCSCTTY for use by getty so getty can get
controlling terminal from init's child(ren)
. allow NULL envp for exec
Change-Id: I5ca02cb4230857140c08794bbfeba7df982c58a3
* Remove support for the Poor Man fstab
* Remove checks for the missing ARCH kernel variable
* Remove .ashrc which is anyway only read once per login
* Cleanup PATH variable
Change-Id: Ic32e5749fba502dfa38d4d538860e717580bad60
- Simplify the message passing between readclock and the driver.
- Add a -q command line option to suppress warning messages. This
cuts down on the noise when readclock is called early in the boot
sequence and a secondary RTC driver (ex TPS95650) isn't up yet.
- Update the man page to be less i386 centric and add details about
the new -q option.
Change-Id: If8d7c50a217ca98c1e9fae0ca92521e2e7c893e4
Add support for getting/setting the am335x SoC's internal real
time clock. Also, allow the power off alarm to be set.
Make readclock an "always on" driver. This is needed for setting
power-off alarms whenever the power button is pressed on the BBB.
Replace the readclock.sh script & single run driver with a
readclock program that takes the same arguments and forwards
the requests on to the always up readclock driver.
Change-Id: Ifd6c2acd80ae4b5e79d83df510df445c24e24a71
To use the new SD building script, Linux has to be configured with
loop.max_part=15 on the command line (or set at module load time)
to make the loopback device see the partitions.
This commit removes a lot of differences between the ARM and x86
boot ramdisk and rc scripts. It changes the ARM build from running
from ramdisk to requiring a full filesystem on the SD image and
booting into it.
. ramdisk: remove some arm-only utilities only used for running
from the shell
. remove ARM-only rc.arm, proto.arm.small, ttys and mylogin.sh
boot-time ramdisk files
. change kernel to add "arch" variable so userland knows what
we're running on from sysenv
. make ARM use the regular ramdisk rc file, changed to distinguish
i386-only and ARM-only drivers; requires rootdevname to be set
. change /etc/rc and /usr/etc/rc to start i386-only drivers only on
i386 systems
. change the kernel/arm to have a special case for the memory
driver to load it higher so it can be bigger
. add uEnv.txt, cmdline.txt and a for now highly linux-dependent
SD preparation script arm_sdimage.sh to the git repository in
releasetools/
Change-Id: I68910ba4e96ee80f7a12b65e48b5d39b43ca6397
complete munmap implementation; single-page references made
a general munmap() implementation possible to write cleanly.
. memory: let the MIOCRAMSIZE ioctl set the imgrd device
size (but only to 0)
. let the ramdisk command set sizes to 0
. use this command to set /dev/imgrd to 0 after mounting /usr
in /etc/rc, so the boot time ramdisk is freed (about 4MB
currently)
The rc script manually parses /etc/fstab to mount all file systems.
To do that it needs /bin/sed which does not exist anymore. mount(8)
now supports the -a flag which causes it to mount all file systems
listed in /etc/fstab except for '/'. File systems marked with 'noauto'
are skipped.
Adding hot plugging infrastructure in rc file. This includes
starting the devman service, mounting it's file system and
starting the corresponding devmand daemon.
This patch also provide error free shutdown of the USB sub-system.
The USB sub system needs to be shutdown in a certain order but also
consists of components living in /usr/pkg/. By checking the
existence of usbd we can stop it in the correct order.
. detect both formats in /etc/rc
. generate new format in setup
. obsoletes /etc/fstab.local: everything can go in /etc/fstab
. put shutdown/reboot/halt and a copy of /usr/adm/wtmp
(/etc/wtmp) on root FS so that we can do shutdown checks before
mounting /usr
. new fstab format makes getfsent() and friends work
VFS CHANGES:
- dmap table no longer statically initialized in VFS
- Dropped FSSIGNON svrctl call no longer used by INET
INET CHANGES:
- INET announces its presence to VFS just like any other driver
RS CHANGES:
- The boot image dev table contains all the data to initialize VFS' dmap table
- RS interface supports asynchronous up and update operations now
- RS interface extended to support driver style and flags
- clean up kernel section of minix/com.h somewhat
- remove ALLOCMEM and VM_ALLOCMEM calls
- remove non-safecopy and minix-vmd support from Inet
- remove SYS_VIRVCOPY and SYS_PHYSVCOPY calls
- remove obsolete segment encoding in SYS_SAFECOPY*
- remove DEVCTL call, svrctl(FSDEVUNMAP), map_driverX
- remove declarations of unimplemented svrctl requests
- remove everything related to swapping to disk
- remove floppysetup.sh
- remove traces of rescue device
- update DESCRIBE.sh with new devices
- some other small changes
- if "debug_fkeys" boot monitor variable is set to 0:
- pass Fn, Shift+Fn, Ctrl+Fn, Shift+Ctrl+Fn to applications
- don't start IS
- update termcap files with function key, color, end key support
bin_img=1 in the boot monitor will make sure that during the boot procedure the
mfs binary that is part of the boot image is the only binary that is used to
mount partitions. This is useful when for some reason the mfs binary on disk
malfunctions, rendering Minix unable to boot. By setting bin_img=1, the binary
on disk is ignored and the binary in the boot image is used instead.
- 'service' now accepts an additional flag -r. -r implies -c. -r instructs RS
to first look in memory if the binary has already been copied to memory and
execute that version, instead of loading the binary from disk. For example,
the first time a MFS is being started it is copied (-c) to memory and
executed from there. The second time MFS is being started this way, RS will
look in memory for a previously copied MFS binary and reuse it if it exists.
- The mount and newroot commands now accept an additional flag -i, which
instructs them to set the MS_REUSE flag in the mount flags.
- The mount system call now supports the MS_REUSE flag and invokes 'service'
with the -r flag when MS_REUSE is set.
- /etc/rc and the rc script that's included in the boot image check for the
existence of the bin_img flag in the boot monitor, and invoke mount and
newroot with the -i flag accordingly.
. replaced by a readclock 'driver' that runs once, a re-imported version
of the minix 2.0.4 readclock command.
. this has also restored cmos writing.
. readclock wrapper script calls service command to run /bin/readclock.drv
once.
