This patch prepares for moving of the creation of socket files on the
file system from the libc bind(2) stub into the UDS service. This
change is necessary for the socket type agnostic libc implementation.
The change is not yet activated - the code that is not yet used is
enclosed in "#if NOT_YET" blocks. The activation needs to be atomic
with UDS's switch to libsockdriver; otherwise, user applications may
break.
As part of the change, various UDS bind(2) semantics are changed to
match the POSIX standard and other operating systems. In
implementation terms, the service-only VFS API checkperms(2) is
renamed to socketpath(2), and extended with a new subcall which
creates a new socket file. An extension to test56 checks the new
bind(2) semantics of UDS, although most new tests are still disabled
until activation as well.
Finally, as further preparation for a more structural redesign of the
UDS service, also return the <device,inode> number pair for the
created or checked file name, and make returning the canonized path
name optional.
Change-Id: I892d04b3301d4b911bdc571632ddde65fb747a8a
This change effectively adds the VFS side of support for the SO_LINGER
socket option, by allowing file descriptor close operations to be
suspended (and later resumed) by socket drivers. Currently, support
is limited to the close(2) system call--in all other cases where file
descriptors are closed (dup2, close-on-exec, process exit..), the
close operation still completes instantly. As a general policy, the
close(2) return value will always indicate that the file descriptor
has been closed: either 0, or -1 with errno set to EINPROGRESS. The
latter error may be thrown only when a suspended close is interrupted
by a signal.
As necessary for UDS, this change also introduces a closenb(2) system
call extension, allowing the caller to bypass blocking SO_LINGER close
behavior. This extension allows UDS to avoid blocking on closing the
last reference to an in-flight file descriptor, in an atomic fashion.
The extension is currently part of libsys, but there is no reason why
userland would not be allowed to make this call, so it is deliberately
not protected from use by userland.
Change-Id: Iec77d6665232110346180017fc1300b1614910b7
With this patch, it is now possible to generate coverage information
for MINIX3 system services with LLVM. In particular, the system can
be built with MKCOVERAGE=yes, either with a native "make build" or
with crosscompilation. Either way, MKCOVERAGE=yes will build the
MINIX3 system services with coverage profiling support, generating a
.gcno file for each source module. After a reboot it is possible to
obtain runtime coverage data (.gcda files) for individual system
services using gcov-pull(8). The combination of the .gcno and .gcda
files can then be inspected with llvm-cov(1).
For reasons documented in minix.gcov.mk, only system service program
modules are supported for now; system service libraries (libsys etc.)
are not included. Userland programs are not affected by MKCOVERAGE.
The heart of this patch is the libsys code that writes data generated
by the LLVM coverage hooks into a serialized format using the routines
we already had for GCC GCOV. Unfortunately, the new llvm_gcov.c code
is LLVM ABI dependent, and may therefore have to be updated later when
we upgrade LLVM. The current implementation should support all LLVM
versions 3.x with x >= 4.
The rest of this patch is mostly a light cleanup of our existing GCOV
infrastructure, with as most visible change that gcov-pull(8) now
takes a service label string rather than a PID number.
Change-Id: I6de055359d3d2b3f53e426f3fffb17af7877261f
Most of the nodes in the general sysctl tree will be managed directly
by the MIB service, which obtains the necessary information as needed.
However, in certain cases, it makes more sense to let another service
manage a part of the sysctl tree itself, in order to avoid replicating
part of that other service in the MIB service. This patch adds the
basic support for such delegation: remote services may now register
their own subtrees within the full sysctl tree with the MIB service,
which will then forward any sysctl(2) requests on such subtrees to the
remote services.
The system works much like mounting a file system, but in addition to
support for shadowing an existing node, the MIB service also supports
creating temporary mount point nodes. Each have their own use cases.
A remote "kern.ipc" would use the former, because even when such a
subtree were not mounted, userland would still expect some of its
children to exist and return default values. A remote "net.inet"
would use the latter, as there is no reason to precreate nodes for all
possible supported networking protocols in the MIB "net" subtree.
A standard remote MIB (RMIB) implementation is provided for services
that wish to make use of this functionality. It is essentially a
simplified and somewhat more lightweight version of the MIB service's
internals, and works more or less the same from a programmer's point
of view. The most important difference is the "rmib" prefix instead
of the "mib" prefix. Documentation will hopefully follow later.
Overall, the RMIB functionality should not be used lightly, for
several reasons. First, despite being more lightweight than the MIB
service, the RMIB module still adds substantially to the code
footprint of the containing service. Second, the RMIB protocol not
only adds extra IPC for sysctl(2), but has also not been optimized for
performance in other ways. Third, and most importantly, the RMIB
implementation also several limitations. The main limitation is that
remote MIB subtrees must be fully static. Not only may the user not
create or destroy nodes, the service itself may not either, as this
would clash with the simplified remote node versioning system and
the cached subtree root node child counts. Other limitations exist,
such as the fact that the root of a remote subtree may only be a
node-type node, and a stricter limit on the highest node identifier
of any child in this subtree root (currently 4095).
The current implementation was born out of necessity, and therefore
it leaves several improvements to future work. Most importantly,
support for exit and crash notification is missing, primarily in the
MIB service. This means that remote subtrees may not be cleaned up
immediately, but instead only when the MIB service attempts to talk
to the dead remote service. In addition, if the MIB service itself
crashes, re-registration of remote subtrees is currently left up to
the individual RMIB users. Finally, the MIB service uses synchronous
(sendrec-based) calls to the remote services, which while convenient
may cause cascading service hangs. The underlying protocol is ready
for conversion to an asynchronous implementation already, though.
A new test set, testrmib.sh, tests the basic RMIB functionality. To
this end it uses a test service, rmibtest, and also reuses part of
the existing test87 MIB service test.
Change-Id: I3378fe04f2e090ab231705bde7e13d6289a9183e
Now that there are services other than PM and VFS that implement
userland system calls directly, these services may need to know about
events related to user processes. In particular, signal delivery may
have to interrupt blocking system calls, and certain cleanup tasks may
have to be performed after a user process exits.
This patch aims to implement a generic, lasting solution for this
problem, by allowing services to subscribe to "signal delivered"
and/or "process exit" events from PM. PM publishes such events by
sending messages to its subscribed services, which must then reply an
acknowledgment message.
For now, only the two aforementioned events are implemented, and only
the IPC service makes use of the process event facility.
The new process event publish/subscribe system replaces the previous
VM notify-sig/watch-exit/query-exit system, which was unsound: 1) it
allowed subscription to events from individual processes, and suffered
from fundamental race conditions as a result; 2) it relied on "not too
many" processes making use of the IPC server functionality in order to
avoid loss of notifications. In addition, it had the "ipc" process
name hardcoded, did not distinguish between signal delivery and exits,
and added a roundtrip to VM for all events from all processes.
Change-Id: I75ebad4bc54e646c6433f473294cb4003b2c3430
- the userland call is now made to PM only, and PM relays the call to
other servers as appropriate; this is an ABI change that will
ultimately allow us to add proper support for wait3() and the like;
for the moment there is backward compatibility;
- the getrusage-specific kernel subcall has been removed, as it
provided only redundant functionality, and did not provide the means
to be extended correctly in the future - namely, allowing the kernel
to return different values depending on whether resource usage of
the caller (self) or its children was requested;
- VM is now told whether resource usage of the caller (self) or its
children is requested, and it refrains from filling in wrong values
for information it does not have;
- VM now uses the correct unit for the ru_maxrss values;
- VFS is cut out of the loop entirely, since it does not provide any
values at the moment; a comment explains how it should be readded.
Change-Id: I27b0f488437dec3d8e784721c67b03f2f853120f
Due to changed VM internals, more elaborate preparation is required
before a live update with multiple components including VM can take
place. This patch adds the essential preparation infrastructure to
VM and adapts RS to make use of it. As a side effect, it is no
longer necessary to supply RS as the last component (if at all)
during the set-up of a multicomponent live update operation.
Change-Id: If069fd3f93f96f9d5433998e4615f861465ef448
The entire infrastructure relied on an ACK feature, and as such, it
has been broken for years now, with no easy way to repair it.
Change-Id: I783c2a21276967af115a642199f31fef0f14a572
