When possible, network drivers are now started automatically. That
means that netconf(8)'s network driver selection has become obsolete.
This patch changes netconf(8) to allow the user to specify a network
configuration (currently one of DHCP IPv4+IPv6, DHCP IPv4-only,
manual IPv4-only) for any hardware network interfaces that are
currently present.
Selection of network drivers that require manual configuration first
(mainly old ISA cards) is still supported, but now as a special case.
Change-Id: I6208fc75192eb7f0b061862aaf7507f71a620da4
This commit adds a new TCP/IP service to MINIX 3. As its core, the
service uses the lwIP TCP/IP stack for maintenance reasons. The
service aims to be compatible with NetBSD userland, including its
low-level network management utilities. It also aims to support
modern features such as IPv6. In summary, the new LWIP service has
support for the following main features:
- TCP, UDP, RAW sockets with mostly standard BSD API semantics;
- IPv6 support: host mode (complete) and router mode (partial);
- most of the standard BSD API socket options (SO_);
- all of the standard BSD API message flags (MSG_);
- the most used protocol-specific socket and control options;
- a default loopback interface and the ability to create one more;
- configuration-free ethernet interfaces and driver tracking;
- queuing and multiple concurrent requests to each ethernet driver;
- standard ioctl(2)-based BSD interface management;
- radix tree backed, destination-based routing;
- routing sockets for standard BSD route reporting and management;
- multicast traffic and multicast group membership tracking;
- Berkeley Packet Filter (BPF) devices;
- standard and custom sysctl(7) nodes for many internals;
- a slab allocation based, hybrid static/dynamic memory pool model.
Many of its modules come with fairly elaborate comments that cover
many aspects of what is going on. The service is primarily a socket
driver built on top of the libsockdriver library, but for BPF devices
it is at the same time also a character driver.
Change-Id: Ib0c02736234b21143915e5fcc0fda8fe408f046f
Also retire support for the MINIX versions of /etc/hosts and
/etc/resolv.conf. These files will be brought back with NetBSD
imports, although like NetBSD, MINIX 3 will be using external
resolvers directly from then on. Since resolv.conf is hand-created
rather than installed, we do not mark it as obsolete.
Change-Id: Ie6154d5a4d8d977c19b9754bf920ae868680e9d1
This commit (temporarily) leaves MINIX 3 without a TCP/IP service.
Thanks go out to Philip Homburg for providing this TCP/IP stack in the
first place. It has served MINIX well for a long time.
Change-Id: I0e3eb6fe64204081e4e3c2b9d6e6bd642f121973
This needs to be done before retiring inet itself, since these
utilities include headers from inet directly.
Also retire the now-obsolete paramvalue(3).
Change-Id: I9b27771190a6a32ee533b0c0d9d37f61a16ee36c
This new implementation of the UDS service is built on top of the
libsockevent library. It thereby inherits all the advantages that
libsockevent brings. However, the fundamental restructuring
required for that change also paved the way for resolution of a
number of other important open issues with the old UDS code. Most
importantly, the rewrite brings the behavior of the service much
closer to POSIX compliance and NetBSD compatibility. These are the
most important changes:
- due to the use of libsockevent, UDS now supports multiple suspending
calls per socket and a large number of standard socket flags and
options;
- socket address matching is now based on <device,inode> lookups
instead of canonized path names, and socket addresses are no longer
altered either due to canonization or at connect time;
- the socket state machine is now well defined, most importantly
resolving the erroneous reset-on-EOF semantics of the old UDS, but
also allowing socket reuse;
- sockets are now connected before being accepted instead of being
held in connecting state, unless the LOCAL_CONNWAIT option is set
on either the connecting or the listening socket;
- connect(2) on datagram sockets is now supported (needed by syslog),
and proper datagram socket disconnect notification is provided;
- the receive queue now supports segmentation, associating ancillary
data (in-flight file descriptors and credentials) with each segment
instead of being kept fully separately; this is a POSIX requirement
(and needed by tmux);
- as part of the segmentation support, the receive queue can now hold
as many packets as can fit, instead of one;
- in addition to the flags supported by libsockevent, the MSG_PEEK,
MSG_WAITALL, MSG_CMSG_CLOEXEC, MSG_TRUNC, and MSG_CTRUNC send and
receive flags are now supported;
- the SO_PASSCRED and SO_PEERCRED socket options are replaced by
LOCAL_CREDS and LOCAL_PEEREID respectively, now following NetBSD
semantics and allowing use of NetBSD libc's getpeereid(3);
- memory usage is reduced by about 250 KB due to centralized in-flight
file descriptor tracking, with a limit of OPEN_MAX total rather than
of OPEN_MAX per socket;
- memory usage is reduced by another ~50 KB due to removal of state
redundancy, despite the fact that socket path names may now be up to
253 bytes rather than the previous 104 bytes;
- compared to the old UDS, there is now very little direct indexing on
the static array of sockets, thus allowing dynamic allocation of
sockets more easily in the future;
- the UDS service now has RMIB support for the net.local sysctl tree,
implementing preliminary support for NetBSD netstat(1).
Change-Id: I4a9b6fe4aaeef0edf2547eee894e6c14403fcb32
This patch introduces the first piece of support for the concept of
"socket drivers": services that implement one or more socket protocol
families. The latter are also known as "domains", as per the first
parameter of the socket(2) API. More specifically, this patch adds
the basic infrastructure for specifying that a particular service is
the socket driver for a set of domains.
Unlike major number mappings for block and character drivers, socket
domain mappings are static. For that reason, they are specified in
system.conf files, using the "domain" keyword. Such a keyword is to
be followed by one or more protocol families, without their "PF_"
prefix. For example, a service with the line "domain INET INET6;"
will be mapped as the socket driver responsible for the AF_INET and
AF_INET6 protocol families.
This patch implements only the infrastructure for creating such
mappings; the actual mapping will be implemented in VFS in a later
patch. The infrastructure is implemented in service(8), RS, and VFS.
For now there is a hardcoded limit of eight domains per socket driver.
This may sound like a lot, but the upcoming new LWIP service will
already use four of those. Also, it is allowed for a service to be
both a block/character driver and a socket driver at the same time,
which is a requirement for the new LWIP service.
Change-Id: I93352d488fc6c481e7079248082895d388c39f2d
IMPORTANT: this change has a docs/UPDATING entry!
This rename is unfortunately necessary because NetBSD has decided to
create its own service(8) utility, and we will want to import theirs
as well. The two can obviously not coexist.
Also move ours from /bin to /sbin, as it is a superuser-only utility.
Change-Id: Ic6e46ffb3a84b4747d2fdcb0d74e62dbea065039
IMPORTANT: this change has a docs/UPDATING entry!
This change is a long overdue switch-over from the old MINIX set of
user and group accounts to the NetBSD set. This switch-over is
increasingly important now that we are importing more and more
utilities from NetBSD, several of which expect various user accounts
to exist. By switching over in one go, we save ourselves various
headaches in the long run, even if the switch-over itself is a bit
painful for existing MINIX users.
The newly imported master.passwd and group files have three exceptions
compared to their NetBSD originals:
1. There is a custom "service" account for MINIX 3 services. This
account is used to limit run-time privileges of various system
services, and is not used for any files on disk. Its user ID may
be changed later, but should always correspond to whatever the
SERVICE_UID definition is set to.
2. The user "bin" has its shell set to /bin/sh, instead of NetBSD's
/sbin/nologin. The reason for this is that the test set in
/usr/tests/minix-posix will not be able to run otherwise.
3. The group "operator" has been set to group ID 0, to match its old
value. This tweak is purely for transitioning purposes: as of
writing, pkgsrc packages are still using root:operator as owner and
group for most installed files. Sometime later, we can change back
"operator" to group ID 5 without breaking anything, because it does
not appear that this group name is used for anything important.
Change-Id: I689bcfff4cf7ba85c27d1ae579057fa3f8019c68
In order to allow for proper matching of available drivers to system
hardware, the output of this utility should reflect the full details
of the input from configuration files. In particular, that includes
sub-IDs of PCI devices when those have been specified.
Change-Id: Iea24d72795cd714268dbdb95df998eb74de8f2bd
With this patch, it is now possible to generate coverage information
for MINIX3 system services with LLVM. In particular, the system can
be built with MKCOVERAGE=yes, either with a native "make build" or
with crosscompilation. Either way, MKCOVERAGE=yes will build the
MINIX3 system services with coverage profiling support, generating a
.gcno file for each source module. After a reboot it is possible to
obtain runtime coverage data (.gcda files) for individual system
services using gcov-pull(8). The combination of the .gcno and .gcda
files can then be inspected with llvm-cov(1).
For reasons documented in minix.gcov.mk, only system service program
modules are supported for now; system service libraries (libsys etc.)
are not included. Userland programs are not affected by MKCOVERAGE.
The heart of this patch is the libsys code that writes data generated
by the LLVM coverage hooks into a serialized format using the routines
we already had for GCC GCOV. Unfortunately, the new llvm_gcov.c code
is LLVM ABI dependent, and may therefore have to be updated later when
we upgrade LLVM. The current implementation should support all LLVM
versions 3.x with x >= 4.
The rest of this patch is mostly a light cleanup of our existing GCOV
infrastructure, with as most visible change that gcov-pull(8) now
takes a service label string rather than a PID number.
Change-Id: I6de055359d3d2b3f53e426f3fffb17af7877261f
The warnings in test47 seem to be a symptom of a larger problem,
i.e., not an issue with the test set code but rather with the GCC
configuration. Hopefully the switch to LLVM will resolve those.
Change-Id: Ic9fa3b8bc9b728947c993f2e1ed49d9a3b731344
Reported by dcb314. Recommendations adopted as is.
This closes#137, closes#138, closes#139, and hopefully I got that
right this time.
Change-Id: I79774f4c398495dba19dec43fbc3f79afd186843
- fix the reinstallation (preserve-/home) option;
- remove support for just reinstalling the bootloader, as the main
purpose of this option (allowing an upgrade from the old MINIX
boot monitor to the NetBSD bootloader) is no longer needed and was
already broken;
- do not try to copy over /etc/motd.install: it no longer exists.
This resolves issue 106.
Change-Id: Iad3805d86c4806d725f9b285c2d4378670790f78
At least it works again now. Sprofalyze should be made aware of the
kernel information page, though (i.e., /proc/ipcvecs).
Change-Id: Id4e5f6417ad152607c4e53b323b6f65ea4b10c6e
- Fix unmounting order of slices.
- Update pkgin pre-installation commands, make them as generic as
possible.
Change-Id: Ifaa4021fed048facca8d2a170aa65491feb37702
A few MINIX3-specific changes are necessary due to the fact that we
are missing the System V IPC message queue system calls.
Change-Id: Idd252984be9df69618cef79bcf6c676cbf915d85
Now that there are services other than PM and VFS that implement
userland system calls directly, these services may need to know about
events related to user processes. In particular, signal delivery may
have to interrupt blocking system calls, and certain cleanup tasks may
have to be performed after a user process exits.
This patch aims to implement a generic, lasting solution for this
problem, by allowing services to subscribe to "signal delivered"
and/or "process exit" events from PM. PM publishes such events by
sending messages to its subscribed services, which must then reply an
acknowledgment message.
For now, only the two aforementioned events are implemented, and only
the IPC service makes use of the process event facility.
The new process event publish/subscribe system replaces the previous
VM notify-sig/watch-exit/query-exit system, which was unsound: 1) it
allowed subscription to events from individual processes, and suffered
from fundamental race conditions as a result; 2) it relied on "not too
many" processes making use of the IPC server functionality in order to
avoid loss of notifications. In addition, it had the "ipc" process
name hardcoded, did not distinguish between signal delivery and exits,
and added a roundtrip to VM for all events from all processes.
Change-Id: I75ebad4bc54e646c6433f473294cb4003b2c3430
No changes except for one cosmetic adjustment: NetBSD has chosen to
rename the standard TT column to TTY and not shorten tty names; we
undo those changes, making ps(1) behave more in accordance with the
specification and its manual page, and, most importantly for us, not
use an incredibly wide TTY column to print "console".
Change-Id: I3b3c198762f3eacf1b8e500557a803c1fedf2a61
Now that uname(3) uses sysctl(2), we no longer need sysuname(2).
Backward compatibility is retained for old statically linked
binaries for a short while.
Also remove the now-obsolete MINIX3-specific "arch" field from the
utsname structure. While this is an ABI break at the libc level,
it should pose no problems in practice, because:
- statically linked programs (i.e., all of the base system) are not
affected, as they will use headers synchronized with libc;
- the structure is getting smaller, thus, older dynamically linked
programs (typically in pkgsrc) using the new libc will end up with
garbage in the "arch" field, but it is unlikely they will use this
field anyway, since it was specific to MINIX3;
- new dynamically linked programs using an old libc could end up with
memory corruption, but this is not a scenario that is expected to
occur in the first place - certainly not with programs from pkgsrc.
Change-Id: I29c76576f509feacc8f996f0bd353ca8961d4917
ASR instrumentation is now performed on all applicable system services
if the system is built with MKASR=yes. This setting automatically
enables MKMAGIC=yes, which in turn enables MKBITCODE=yes.
The number of extra rerandomized service binaries to be generated can
be set by passing ASRCOUNT=n to the build system, where n is a number
between 1 and 65536. The default ASRCOUNT is 3, meaning that each
service will have one randomized base binary and three additional
rerandomized binaries. As before, update_asr(8) can be used for
runtime rerandomization.
Change-Id: Icb498bcc6d1cd8d3f6bcc24eb0b32e29b7e750c2
Until now, the program name of a service was always the file name
(without directory) of the service binary. The program name is used
to, among other things, find the corresponding system.conf entry.
With ASR moving to a situation where all rerandomized service binaries
are stored in a single directory, this can no longer be maintained.
Instead, the service(8) command can now be instructed to override the
service program name, using its new -progname option.
Change-Id: I981e9b35232c88048d8804ec5eca58d1e4a5db82
This brings our tree to NetBSD 7.0, as found on -current on the
10-10-2015.
This updates:
- LLVM to 3.6.1
- GCC to GCC 5.1
- Replace minix/commands/zdump with usr.bin/zdump
- external/bsd/libelf has moved to /external/bsd/elftoolchain/
- Import ctwm
- Drop sprintf from libminc
Change-Id: I149836ac18e9326be9353958bab9b266efb056f0
