minix3.org

/usr/lib/ego/* files.

commands/Makefile

@@ -34,13 +34,10 @@ all: small big
 install: biginstall smallinstall
 
 small::
-	-mkdir $(NVIWORK)
 	cd $(GZIP) && CC="$(CC)" /bin/sh ./configure --prefix=/usr/local && $(MAKE) all
-	cd $(NVI) && make all
 
 smallinstall:: small
 	cd $(GZIP) && $(MAKE) install 
-	cd $(NVI) && make install
 
 big:
 	cd $(FLEX) && /bin/sh makeme.sh 
@@ -50,6 +47,8 @@ big:
 	cd $(COREUTILS) && /bin/sh makeme.sh
 	cd $(EMACS) && /bin/sh makeme.sh
 	cd $(PYTHON) && /bin/sh makeme.sh 
+	-mkdir $(NVIWORK)
+	cd $(NVI) && make all
 
 biginstall: big
 	cd $(FLEX) && make install
@@ -59,6 +58,7 @@ biginstall: big
 	cd $(LYNX) && make install
 	cd $(EMACS) && make install
 	cd $(COREUTILS) && make install
+	cd $(NVI) && make install
 
 clean::
 	if [ -f $(FLEX)/Makefile ] ; then cd $(FLEX) && make $@; fi

commands/ash/bltin/regexp.c

@@ -246,7 +246,7 @@ ccl:
 				p++;
 			}
 			p++;
-			if (found == negate)
+			if (found == negate || c == 0)
 				goto bad;
 			break;
 		case RE_LP:

commands/scripts/Makefile

@@ -24,7 +24,6 @@ usr:	\
 		/usr/bin/expr \
 		/usr/bin/false \
 		/usr/bin/getopts \
-		/usr/bin/getpack \
 		/usr/bin/read \
 		/usr/bin/test \
 		/usr/bin/true \
@@ -96,9 +95,6 @@ clean:
 /usr/bin/easypack:	easypack.sh
 	install -m 755 -c -o bin $? $@
 
-/usr/bin/getpack:	getpack.sh
-	install -m 755 -c -o bin $? $@
-
 /usr/bin/checkhier:	checkhier.sh
 	install -m 755 -c -o bin $? $@
 

commands/scripts/binsizes.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-t=/usr/src/etc/binary_sizes
+t=/etc/binary_sizes
 
 if [ "$#" -ne 1 ]
 then	echo "Usage: $0 <big|normal>"
@@ -11,6 +11,7 @@ if [ "$1" = big ]
 then t=$t.big
 fi
 chmem =250000 /usr/lib/* /usr/lib/i386/* >/dev/null 2>&1
+chmem =600000 /usr/lib/ego/*  >/dev/null 2>&1
 if [ -f $t ]
 then	cat "$t" | while read line
 	do	awk '{ print "chmem =" $2 " " $1 " >/dev/null 2>&1 "}'

commands/scripts/getpack.sh

@@ -1,30 +0,0 @@
-#!/bin/sh
-
-if [ $# -ne 1 ]
-then	echo "Usage: $0 <url>"
-	exit 1
-fi
-
-if [ -z "$HOME" ]
-then	echo "Where is your \$HOME? "
-	exit 1
-fi
-
-if [ ! -d "$HOME" ]
-then	echo "Where is your \$HOME ($HOME) ? "
-	exit 1
-fi
-
-tmpdir=$HOME/getpack$$
-tmpfile=package
-tmpfiletar=$tmpfile.tar
-tmpfiletargz=$tmpfile.tar.gz
-
-mkdir -m 700 $tmpdir || exit 1
-cd $tmpdir || exit 1
-
-urlget "$1" >$tmpfiletargz
-
-gzip -d $tmpfiletargz || exit 1
-tar xf $tmpfiletar || exit 1
-make && make install && echo "Ok."

commands/simple/mkdir.c

@@ -192,12 +192,14 @@ char **argv;
 int makepath(fordir)
 char *fordir;
 {
-  char parent[PATH_MAX + 1], *end;
+  char parent[PATH_MAX + 1], *end, *last;
 
   strcpy(parent, fordir);
-  if (!(end = strrchr(parent, '/'))) return(0);
-  *end = '\0';
-  if (!parent[0]) return(0);
+  do {
+	  if (!(end = strrchr(parent, '/'))) return(0);
+	  *end = '\0';
+	  if (!parent[0] || !strcmp(parent, ".")) return(0);
+  } while((last = strrchr(parent, '/')) && !strcmp(last+1, "."));
 
   if (!stat(parent, &st)) {
 	if (S_ISDIR(st.st_mode)) return(0);

drivers/libpci/pci_table.c

@@ -264,6 +264,7 @@ struct pci_isabridge pci_isabridge[]=
  	{ 0x8086, 0x7100, 1, PCI_IB_PIIX,	},	/* Intel 82371AB (asw 2004-07-31) */
  	{ 0x8086, 0x7110, 1, PCI_IB_PIIX,	},	/* Intel PIIX4 */
  	{ 0x8086, 0x7124, 1, PCI_IB_PIIX,	},	/* Intel 82801AA (asw 2004-11-09) */
+	{ 0x8086, 0x2641, 1, PCI_IB_PIIX,	},
 	{ 0x0000, 0x0000, 0, 0, 		},
 };
 

drivers/tty/tty.c

@@ -285,8 +285,8 @@ PUBLIC void main(void)
 	    case DEV_SELECT:	 do_select(tp, &tty_mess);	  break;
 	    case CANCEL:	 do_cancel(tp, &tty_mess);	  break;
 	    default:		
-		printf("Warning, TTY got unexpected request %d from %d (open is %d)\n",
-			tty_mess.m_type, tty_mess.m_source, DEV_OPEN);
+		printf("Warning, TTY got unexpected request %d from %d\n",
+			tty_mess.m_type, tty_mess.m_source);
 	    tty_reply(TASK_REPLY, tty_mess.m_source,
 						tty_mess.PROC_NR, EINVAL);
 	}
@@ -1516,7 +1516,7 @@ PRIVATE void tty_init()
   		tp->tty_minor = RS232_MINOR + s-NR_CONS;
   	} else {
 		pty_init(tp);
-  		tp->tty_minor = s + TTYPX_MINOR + s-(NR_CONS+RS232_MINOR);
+		tp->tty_minor = s - (NR_CONS+NR_RS_LINES) + TTYPX_MINOR;
   	}
   }
 

etc/Makefile

@@ -1,7 +1,7 @@
 
 ETC=/etc/
 USRETC=/usr/etc/
-FILES1=fstab group hostname.file inet.conf motd mtab passwd profile protocols rc services termcap ttytab utmp rc.cd
+FILES1=fstab group hostname.file inet.conf motd mtab passwd profile protocols rc services termcap ttytab utmp rc.cd binary_sizes binary_sizes.big
 FILES2=shadow
 FILES3=daily dhcptags.conf rc
 
@@ -18,8 +18,8 @@ install::
 	sh mtree.sh mtree/minix.tree
 	@for f in $(FILES3); do if [ -f $(USRETC)/$$f ]; then :; else cp usr/$$f $(USRETC); chmod 755 $(USRETC)/$$f; fi; done
 	@echo "Making devices.."
-	cd /dev && sh /usr/src/commands/scripts/MAKEDEV.sh null 
-	cd /dev && sh /usr/src/commands/scripts/MAKEDEV.sh std  2>/dev/null
+	p=`pwd` && cd /dev && sh $$p/../commands/scripts/MAKEDEV.sh null 
+	p=`pwd` && cd /dev && sh $$p/../commands/scripts/MAKEDEV.sh std  2>/dev/null
 	@echo "Making user homedirs.."
 	for u in /usr/ast ~root; do (cd ast && tar cf - .[a-z]* ) | (cd $$u && tar xf - ); done
 

etc/motd

@@ -8,7 +8,8 @@ www.minix3.org
 
 to see how you can help.  That page also contains additional MINIX 3
 software, documentation, and information about the MINIX community.  If
-you find a bug, please use the "Report a bug" link on that page.
+you find a bug, please use the "Report a bug" link on that page, or mail
+to <bugs@minix3.org>.
 
 For help with MINIX 3 and discussion about it, please subscribe to the
 newsgroup: comp.os.minix.

etc/mtree/minix.tree

@@ -17,8 +17,6 @@
 755 bin     operator /usr/bin
 755 root    operator /usr/etc
 755 root    operator /home
-755 root    operator /usr/home
-700 bin     other    /usr/home/bin
 755 bin     operator /usr/include
 755 root    operator /usr/lib
 755 root    operator /usr/lib/advent

include/minix/config.h

@@ -3,7 +3,7 @@
 
 /* Minix release and version numbers. */
 #define OS_RELEASE "3"
-#define OS_VERSION "1"
+#define OS_VERSION "1.0"
 
 /* This file sets configuration parameters for the MINIX kernel, FS, and PM.
  * It is divided up into two main sections.  The first section contains

kernel/clock.c

@@ -1,16 +1,17 @@
-/* The file contais the clock task, which handles all time related functions.
- * Important events that are handled by the CLOCK include alarm timers and
- * (re)scheduling user processes. 
+/* This file contains the clock task, which handles time related functions.
+ * Important events that are handled by the CLOCK include setting and 
+ * monitoring alarm timers and deciding when to (re)schedule processes. 
  * The CLOCK offers a direct interface to kernel processes. System services 
  * can access its services through system calls, such as sys_setalarm(). The
- * CLOCK task thus is hidden for the outside world.  
+ * CLOCK task thus is hidden from the outside world.  
  *
  * Changes:
+ *   Oct 08, 2005   reordering and comment editing (A. S. Woodhull)
  *   Mar 18, 2004   clock interface moved to SYSTEM task (Jorrit N. Herder) 
  *   Sep 30, 2004   source code documentation updated  (Jorrit N. Herder)
  *   Sep 24, 2004   redesigned alarm timers  (Jorrit N. Herder)
  *
- * The function do_clocktick() is not triggered by the clock's interrupt 
+ * The function do_clocktick() is triggered by the clock's interrupt 
  * handler when a watchdog timer has expired or a process must be scheduled. 
  *
  * In addition to the main clock_task() entry point, which starts the main 
@@ -19,12 +20,11 @@
  *   get_uptime:	get realtime since boot in clock ticks
  *   set_timer:		set a watchdog timer (+)
  *   reset_timer:	reset a watchdog timer (+)
- *   calc_elapsed:	do timing measurements: get delta ticks and pulses
  *   read_clock:	read the counter of channel 0 of the 8253A timer
  *
  * (+) The CLOCK task keeps tracks of watchdog timers for the entire kernel.
  * The watchdog functions of expired timers are executed in do_clocktick(). 
- * It is crucial that watchdog functions cannot block, or the CLOCK task may
+ * It is crucial that watchdog functions not block, or the CLOCK task may
  * be blocked. Do not send() a message when the receiver is not expecting it.
  * Instead, notify(), which always returns, should be used. 
  */
@@ -40,7 +40,6 @@ FORWARD _PROTOTYPE( int clock_handler, (irq_hook_t *hook) );
 FORWARD _PROTOTYPE( int do_clocktick, (message *m_ptr) );
 
 /* Clock parameters. */
-#if (CHIP == INTEL)
 #define COUNTER_FREQ (2*TIMER_FREQ) /* counter frequency using square wave */
 #define LATCH_COUNT     0x00	/* cc00xxxx, c = channel, x = any */
 #define SQUARE_WAVE     0x36	/* ccaammmb, a = access, m = mode, b = BCD */
@@ -49,14 +48,9 @@ FORWARD _PROTOTYPE( int do_clocktick, (message *m_ptr) );
 #define TIMER_FREQ  1193182L	/* clock frequency for timer in PC and AT */
 
 #define CLOCK_ACK_BIT	0x80	/* PS/2 clock interrupt acknowledge bit */
-#endif
-
-#if (CHIP == M68000)
-#define TIMER_FREQ  2457600L	/* timer 3 input clock frequency */
-#endif
 
 /* The CLOCK's timers queue. The functions in <timers.h> operate on this. 
- * All system processes possess a single synchronous alarm timer. If other 
+ * Each system process possesses a single synchronous alarm timer. If other 
  * kernel parts want to use additional timers, they must declare their own 
  * persistent (static) timer structure, which can be passed to the clock
  * via (re)set_timer().
@@ -74,15 +68,14 @@ PRIVATE irq_hook_t clock_hook;		/* interrupt handler hook */
  *===========================================================================*/
 PUBLIC void clock_task()
 {
-/* Main program of clock task. It determines which call this is by looking at
- * the message type and dispatches.
+/* Main program of clock task. If the call is not HARD_INT it is an error.
  */
   message m;			/* message buffer for both input and output */
   int result;			/* result returned by the handler */
 
   init_clock();			/* initialize clock task */
 
-  /* Main loop of the clock task.  Get work, process it, sometimes reply. */
+  /* Main loop of the clock task.  Get work, process it. Never reply. */
   while (TRUE) {
 
       /* Go get a message. */
@@ -112,7 +105,7 @@ message *m_ptr;				/* pointer to request message */
   /* A process used up a full quantum. The interrupt handler stored this
    * process in 'prev_ptr'.  First make sure that the process is not on the 
    * scheduling queues.  Then announce the process ready again. Since it has 
-   * no more time left, it will get a new quantum and inserted at the right 
+   * no more time left, it gets a new quantum and is inserted at the right 
    * place in the queues.  As a side-effect a new process will be scheduled.
    */ 
   if (prev_ptr->p_ticks_left <= 0 && priv(prev_ptr)->s_flags & PREEMPTIBLE) {
@@ -131,6 +124,33 @@ message *m_ptr;				/* pointer to request message */
   return(EDONTREPLY);
 }
 
+/*===========================================================================*
+ *				init_clock				     *
+ *===========================================================================*/
+PRIVATE void init_clock()
+{
+  /* Initialize the CLOCK's interrupt hook. */
+  clock_hook.proc_nr = CLOCK;
+
+  /* Initialize channel 0 of the 8253A timer to, e.g., 60 Hz. */
+  outb(TIMER_MODE, SQUARE_WAVE);	/* set timer to run continuously */
+  outb(TIMER0, TIMER_COUNT);		/* load timer low byte */
+  outb(TIMER0, TIMER_COUNT >> 8);	/* load timer high byte */
+  put_irq_handler(&clock_hook, CLOCK_IRQ, clock_handler);/* register handler */
+  enable_irq(&clock_hook);		/* ready for clock interrupts */
+}
+
+/*===========================================================================*
+ *				clock_stop				     *
+ *===========================================================================*/
+PUBLIC void clock_stop()
+{
+/* Reset the clock to the BIOS rate. (For rebooting) */
+  outb(TIMER_MODE, 0x36);
+  outb(TIMER0, 0);
+  outb(TIMER0, 0);
+}
+
 /*===========================================================================*
  *				clock_handler				     *
  *===========================================================================*/
@@ -234,35 +254,6 @@ struct timer *tp;		/* pointer to timer structure */
 	TMR_NEVER : clock_timers->tmr_exp_time;
 }
 
-#if (CHIP == INTEL)
-
-/*===========================================================================*
- *				init_clock				     *
- *===========================================================================*/
-PRIVATE void init_clock()
-{
-  /* Initialize the CLOCK's interrupt hook. */
-  clock_hook.proc_nr = CLOCK;
-
-  /* Initialize channel 0 of the 8253A timer to, e.g., 60 Hz. */
-  outb(TIMER_MODE, SQUARE_WAVE);	/* set timer to run continuously */
-  outb(TIMER0, TIMER_COUNT);		/* load timer low byte */
-  outb(TIMER0, TIMER_COUNT >> 8);	/* load timer high byte */
-  put_irq_handler(&clock_hook, CLOCK_IRQ, clock_handler);/* register handler */
-  enable_irq(&clock_hook);		/* ready for clock interrupts */
-}
-
-/*===========================================================================*
- *				clock_stop				     *
- *===========================================================================*/
-PUBLIC void clock_stop()
-{
-/* Reset the clock to the BIOS rate. (For rebooting) */
-  outb(TIMER_MODE, 0x36);
-  outb(TIMER0, 0);
-  outb(TIMER0, 0);
-}
-
 /*===========================================================================*
  *				read_clock				     *
  *===========================================================================*/
@@ -281,6 +272,3 @@ PUBLIC unsigned long read_clock()
   
   return count;
 }
-
-#endif /* (CHIP == INTEL) */
-

kernel/klib386.s

@@ -564,7 +564,7 @@ _read_tsc:
 !*			      read_flags					     *
 !*===========================================================================*
 ! PUBLIC unsigned long read_cpu_flags(void);
-! Read the cycle counter of the CPU. Pentium and up. 
+! Read CPU status flags from C.
 .align 16
 _read_cpu_flags:
 	pushf

kernel/main.c

@@ -59,7 +59,7 @@ PUBLIC void main()
 	ppriv_addr[i] = sp;			/* priv ptr from number */
   }
 
-  /* Set up proc table entries for tasks and servers.  The stacks of the
+  /* Set up proc table entries for processes in boot image.  The stacks of the
    * kernel tasks are initialized to an array in data space.  The stacks
    * of the servers have been added to the data segment by the monitor, so
    * the stack pointer is set to the end of the data segment.  All the
@@ -172,8 +172,8 @@ PUBLIC void main()
 PRIVATE void announce(void)
 {
   /* Display the MINIX startup banner. */
-  kprintf("MINIX %s.%s.\nCopyright 2006, 1997, 1987 Pearson Education, Inc.\n"
-  "MINIX 3 Copyright 2006, 1997, 1987 Vrije Universiteit\n",
+  kprintf("\nMINIX %s.%s. "
+  "Copyright 2006, Vrije Universiteit, Amsterdam, The Netherlands\n",
       OS_RELEASE, OS_VERSION);
 #if (CHIP == INTEL)
   /* Real mode, or 16/32-bit protected mode? */
@@ -193,7 +193,7 @@ int how;
   register struct proc *rp; 
   message m;
 
-  /* Show debugging dumps on panics. Make sure that the TTY task is still 
+  /* Show debugging dumps on panics. Make sure that the TTY driver is still 
    * available to handle them. This is done with help of a non-blocking send. 
    * We rely on TTY to call sys_abort() when it is done with the dumps.
    */

kernel/proc.c

@@ -149,9 +149,9 @@ message *m_ptr;			/* pointer to message in the caller's space */
           return(ECALLDENIED);		/* call denied by ipc mask */
       }
 
-      if (isemptyn(src_dst) && !shutdown_started) {
-          kprintf("sys_call: dead dest; %d, %d, %d\n", 
-              function, proc_nr(caller_ptr), src_dst);
+      if (isemptyn(src_dst)) {
+	if(!shutdown_started)
+	 kprintf("sys_call: dead dst; %d->%d\n", proc_nr(caller_ptr), src_dst);
           return(EDEADDST); 		/* cannot send to the dead */
       }
   }
@@ -228,7 +228,7 @@ unsigned flags;				/* system call flags */
 		 dst_ptr->p_messbuf);
 	if ((dst_ptr->p_rts_flags &= ~RECEIVING) == 0) enqueue(dst_ptr);
   } else if ( ! (flags & NON_BLOCKING)) {
-	/* Destination is not waiting.  Block and queue caller. */
+	/* Destination is not waiting.  Block and dequeue caller. */
 	caller_ptr->p_messbuf = m_ptr;
 	if (caller_ptr->p_rts_flags == 0) dequeue(caller_ptr);
 	caller_ptr->p_rts_flags |= SENDING;
@@ -546,7 +546,7 @@ PRIVATE void pick_proc()
   int q;					/* iterate over queues */
 
   /* Check each of the scheduling queues for ready processes. The number of
-   * queues is defined in proc.h, and priorities are set in the task table.
+   * queues is defined in proc.h, and priorities are set in the image table.
    * The lowest queue contains IDLE, which is always ready.
    */
   for (q=0; q < NR_SCHED_QUEUES; q++) {	

kernel/system.c

@@ -1,10 +1,10 @@
-/* This task handles the interface between the kernel and user-level servers.
- * System services can be accessed by doing a system call. System calls are 
- * transformed into request messages, which are handled by this task. By 
- * convention, a sys_call() is transformed in a SYS_CALL request message that
- * is handled in a function named do_call(). 
+/* This task provides an interface between the kernel and user-space system
+ * processes. System services can be accessed by doing a kernel call. Kernel
+ * calls are  transformed into request messages, which are handled by this
+ * task. By convention, a sys_call() is transformed in a SYS_CALL request
+ * message that is handled in a function named do_call(). 
  *
- * A private call vector is used to map all system calls to the functions that
+ * A private call vector is used to map all kernel calls to the functions that
  * handle them. The actual handler functions are contained in separate files
  * to keep this file clean. The call vector is used in the system task's main
  * loop to handle all incoming requests.  
@@ -39,9 +39,9 @@
 #include "protect.h"
 #endif
 
-/* Declaration of the call vector that defines the mapping of system calls 
+/* Declaration of the call vector that defines the mapping of kernel calls 
  * to handler functions. The vector is initialized in sys_init() with map(), 
- * which makes sure the system call numbers are ok. No space is allocated, 
+ * which makes sure the kernel call numbers are ok. No space is allocated, 
  * because the dummy is declared extern. If an illegal call is given, the 
  * array size will be negative and this won't compile. 
  */
@@ -117,8 +117,8 @@ PRIVATE void initialize(void)
     tmr_inittimer(&(sp->s_alarm_timer));
   }
 
-  /* Initialize the call vector to a safe default handler. Some system calls 
-   * may be disabled or nonexistant. Then explicitely map known calls to their
+  /* Initialize the call vector to a safe default handler. Some kernel calls 
+   * may be disabled or nonexistant. Then explicitly map known calls to their
    * handler functions. This is done with a macro that gives a compile error
    * if an illegal call number is used. The ordering is not important here.
    */
@@ -280,36 +280,6 @@ int sig_nr;			/* signal to be sent, 1 to _NSIG */
   }
 }
 
-/*===========================================================================*
- *				umap_bios				     *
- *===========================================================================*/
-PUBLIC phys_bytes umap_bios(rp, vir_addr, bytes)
-register struct proc *rp;	/* pointer to proc table entry for process */
-vir_bytes vir_addr;		/* virtual address in BIOS segment */
-vir_bytes bytes;		/* # of bytes to be copied */
-{
-/* Calculate the physical memory address at the BIOS. Note: currently, BIOS
- * address zero (the first BIOS interrupt vector) is not considered, as an 
- * error here, but since the physical address will be zero as well, the 
- * calling function will think an error occurred. This is not a problem,
- * since no one uses the first BIOS interrupt vector.  
- */
-
-  /* Check all acceptable ranges. */
-  if (vir_addr >= BIOS_MEM_BEGIN && vir_addr + bytes <= BIOS_MEM_END)
-  	return (phys_bytes) vir_addr;
-  else if (vir_addr >= BASE_MEM_TOP && vir_addr + bytes <= UPPER_MEM_END)
-  	return (phys_bytes) vir_addr;
-
-#if DEAD_CODE	/* brutal fix, if the above is too restrictive */
-  if (vir_addr >= BIOS_MEM_BEGIN && vir_addr + bytes <= UPPER_MEM_END)
-  	return (phys_bytes) vir_addr;
-#endif
-
-  kprintf("Warning, error in umap_bios, virtual address 0x%x\n", vir_addr);
-  return 0;
-}
-
 /*===========================================================================*
  *				umap_local				     *
  *===========================================================================*/
@@ -343,7 +313,7 @@ vir_bytes bytes;		/* # of bytes to be copied */
 	seg = (vc < rp->p_memmap[D].mem_vir + rp->p_memmap[D].mem_len ? D : S);
 #else
   if (seg != T)
-	seg = (vc < rp->p_memmap[S].mem_vir ? D : S);
+       seg = (vc < rp->p_memmap[S].mem_vir ? D : S);
 #endif
 
   if ((vir_addr>>CLICK_SHIFT) >= rp->p_memmap[seg].mem_vir + 
@@ -390,6 +360,30 @@ vir_bytes bytes;		/* # of bytes to be copied */
   return(fm->mem_phys + (phys_bytes) vir_addr); 
 }
 
+/*===========================================================================*
+ *				umap_bios				     *
+ *===========================================================================*/
+PUBLIC phys_bytes umap_bios(rp, vir_addr, bytes)
+register struct proc *rp;	/* pointer to proc table entry for process */
+vir_bytes vir_addr;		/* virtual address in BIOS segment */
+vir_bytes bytes;		/* # of bytes to be copied */
+{
+/* Calculate the physical memory address at the BIOS. Note: currently, BIOS
+ * address zero (the first BIOS interrupt vector) is not considered as an 
+ * error here, but since the physical address will be zero as well, the 
+ * calling function will think an error occurred. This is not a problem,
+ * since no one uses the first BIOS interrupt vector.  
+ */
+
+  /* Check all acceptable ranges. */
+  if (vir_addr >= BIOS_MEM_BEGIN && vir_addr + bytes <= BIOS_MEM_END)
+  	return (phys_bytes) vir_addr;
+  else if (vir_addr >= BASE_MEM_TOP && vir_addr + bytes <= UPPER_MEM_END)
+  	return (phys_bytes) vir_addr;
+  kprintf("Warning, error in umap_bios, virtual address 0x%x\n", vir_addr);
+  return 0;
+}
+
 /*===========================================================================*
  *				virtual_copy				     *
  *===========================================================================*/

kernel/system.h

@@ -2,7 +2,7 @@
  * are undefined to do_unused if the kernel call is not enabled in config.h. 
  * The implementation is contained in src/kernel/system/.  
  *
- * The system library allows to access system services by doing a system call.
+ * The system library allows to access system services by doing a kernel call.
  * System calls are transformed into request messages to the SYS task that is 
  * responsible for handling the call. By convention, sys_call() is transformed 
  * into a message with type SYS_CALL that is handled in a function do_call(). 
@@ -11,7 +11,7 @@
  *   Jul 30, 2005   created SYS_INT86 to support BIOS driver  (Philip Homburg) 
  *   Jul 13, 2005   created SYS_PRIVCTL to manage services  (Jorrit N. Herder) 
  *   Jul 09, 2005   updated SYS_KILL to signal services  (Jorrit N. Herder) 
- *   Jun 21, 2005   created SYS_NICE for nice(2) system call  (Ben J. Gras)
+ *   Jun 21, 2005   created SYS_NICE for nice(2) kernel call  (Ben J. Gras)
  *   Jun 21, 2005   created SYS_MEMSET to speed up exec(2)  (Ben J. Gras)
  *   Apr 12, 2005   updated SYS_VCOPY for virtual_copy()  (Jorrit N. Herder)
  *   Jan 20, 2005   updated SYS_COPY for virtual_copy()  (Jorrit N. Herder)

kernel/system/do_abort.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_ABORT
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m1_i1:	ABRT_HOW 	(how to abort, possibly fetch monitor params)	
  *    m1_i2:	ABRT_MON_PROC 	(proc nr to get monitor params from)	
  *    m1_i3:	ABRT_MON_LEN	(length of monitor params)
@@ -19,9 +19,9 @@
 PUBLIC int do_abort(m_ptr)
 message *m_ptr;			/* pointer to request message */
 {
-/* Handle sys_abort. MINIX is unable to continue. This can originate in the
- * PM (normal abort or panic) or FS (panic), or TTY (after CTRL-ALT-DEL). 
- */
+  /* Handle sys_abort. MINIX is unable to continue. This can originate in the
+   * PM (normal abort or panic) or TTY (after CTRL-ALT-DEL). 
+   */
   int how = m_ptr->ABRT_HOW;
   int proc_nr;
   int length;

kernel/system/do_copy.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_VIRCOPY, SYS_PHYSCOPY
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m5_c1:	CP_SRC_SPACE		source virtual segment
  *    m5_l1:	CP_SRC_ADDR		source offset within segment
  *    m5_i1:	CP_SRC_PROC_NR		source process number
@@ -24,7 +24,7 @@ register message *m_ptr;	/* pointer to request message */
 {
 /* Handle sys_vircopy() and sys_physcopy().  Copy data using virtual or
  * physical addressing. Although a single handler function is used, there 
- * are two different system calls so that permissions can be checked. 
+ * are two different kernel calls so that permissions can be checked. 
  */
   struct vir_addr vir_addr[2];	/* virtual source and destination address */
   phys_bytes bytes;		/* number of bytes to copy */

kernel/system/do_devio.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_DEVIO
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *   m2_i3:	DIO_REQUEST	(request input or output)	
  *   m2_i1:	DIO_TYPE	(flag indicating byte, word, or long)
  *   m2_l1:	DIO_PORT	(port to read/ write)	

kernel/system/do_endksig.c

@@ -1,7 +1,7 @@
-/* The system call that is implemented in this file:
+/* The kernel call that is implemented in this file:
  *   m_type:	SYS_ENDKSIG
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *     m2_i1:	SIG_PROC  	# process for which PM is done
  */
 

kernel/system/do_exec.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_EXEC
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m1_i1:	PR_PROC_NR		(process that did exec call)
  *    m1_p1:	PR_STACK_PTR		(new stack pointer)
  *    m1_p2:	PR_NAME_PTR		(pointer to program name)

kernel/system/do_exit.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_EXIT
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m1_i1:	PR_PROC_NR		(slot number of exiting process)
  */
 

kernel/system/do_fork.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_FORK
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m1_i1:	PR_PROC_NR	(child's process table slot)	
  *    m1_i2:	PR_PPROC_NR	(parent, process that forked)	
  */

kernel/system/do_getinfo.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_GETINFO
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m1_i3:	I_REQUEST	(what info to get)	
  *    m1_p1:	I_VAL_PTR 	(where to put it)	
  *    m1_i1:	I_VAL_LEN 	(maximum length expected, optional)	

kernel/system/do_getksig.c

@@ -1,7 +1,7 @@
-/* The system call that is implemented in this file:
+/* The kernel call that is implemented in this file:
  *   m_type:	SYS_GETKSIG
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *     m2_i1:	SIG_PROC  	# process with pending signals
  *     m2_l1:	SIG_MAP		# bit map with pending signals
  */
@@ -18,7 +18,7 @@
 PUBLIC int do_getksig(m_ptr)
 message *m_ptr;			/* pointer to request message */
 {
-/* PM is ready to accept signals and repeatedly does a system call to get 
+/* PM is ready to accept signals and repeatedly does a kernel call to get 
  * one. Find a process with pending signals. If no signals are available, 
  * return NONE in the process number field.
  * It is not sufficient to ready the process when PM is informed, because 

kernel/system/do_int86.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_INT86
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m1_p1:	INT86_REG86     
  */
 

kernel/system/do_irqctl.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_IRQCTL
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m5_c1:	IRQ_REQUEST	(control operation to perform)	
  *    m5_c2:	IRQ_VECTOR	(irq line that must be controlled)
  *    m5_i1:	IRQ_POLICY	(irq policy allows reenabling interrupts)

kernel/system/do_kill.c

@@ -1,7 +1,7 @@
-/* The system call that is implemented in this file:
+/* The kernel call that is implemented in this file:
  *   m_type:	SYS_KILL
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *     m2_i1:	SIG_PROC  	# process to signal/ pending		
  *     m2_i2:	SIG_NUMBER	# signal number to send to process
  */

kernel/system/do_memset.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_MEMSET
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m2_p1:	MEM_PTR		(virtual address)	
  *    m2_l1:	MEM_COUNT	(returns physical address)	
  *    m2_l2:	MEM_PATTERN	(size of datastructure) 	

kernel/system/do_newmap.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_NEWMAP
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m1_i1:	PR_PROC_NR		(install new map for this process)
  *    m1_p1:	PR_MEM_PTR		(pointer to the new memory map)
  */

kernel/system/do_nice.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_NICE
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m1_i1:	PR_PROC_NR	process number to change priority
  *    m1_i2:	PR_PRIORITY	the new priority
  */

kernel/system/do_privctl.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_PRIVCTL
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m1_i1:	PR_PROC_NR 	(process number of caller)	
  */
 

kernel/system/do_sdevio.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_SDEVIO
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m2_i3:	DIO_REQUEST	(request input or output)	
  *    m2_i1:	DIO_TYPE	(flag indicating byte, word, or long)
  *    m2_l1:	DIO_PORT	(port to read/ write)	

kernel/system/do_segctl.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_SEGCTL
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m4_l3:	SEG_PHYS	(physical base address)
  *    m4_l4:	SEG_SIZE	(size of segment)
  *    m4_l1:	SEG_SELECT	(return segment selector here)

kernel/system/do_setalarm.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_SETALARM 
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m2_l1:	ALRM_EXP_TIME		(alarm's expiration time)
  *    m2_i2:	ALRM_ABS_TIME		(expiration time is absolute?)
  *    m2_l1:	ALRM_TIME_LEFT		(return seconds left of previous)

kernel/system/do_sigreturn.c

@@ -1,7 +1,7 @@
-/* The system call that is implemented in this file:
+/* The kernel call that is implemented in this file:
  *   m_type:	SYS_SIGRETURN
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *     m2_i1:	SIG_PROC  	# process returning from handler
  *     m2_p1:	SIG_CTXT_PTR 	# pointer to sigcontext structure
  *

kernel/system/do_sigsend.c

@@ -1,7 +1,7 @@
-/* The system call that is implemented in this file:
+/* The kernel call that is implemented in this file:
  *   m_type:	SYS_SIGSEND
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *     m2_i1:	SIG_PROC  	# process to call signal handler
  *     m2_p1:	SIG_CTXT_PTR 	# pointer to sigcontext structure
  *     m2_i3:	SIG_FLAGS    	# flags for S_SIGRETURN call	

kernel/system/do_times.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_TIMES
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m4_l1:	T_PROC_NR		(get info for this process)	
  *    m4_l1:	T_USER_TIME		(return values ...)	
  *    m4_l2:	T_SYSTEM_TIME	
@@ -22,7 +22,7 @@ register message *m_ptr;	/* pointer to request message */
   register struct proc *rp;
   int proc_nr;
 
-  /* Insert the times needed by the SYS_TIMES system call in the message. 
+  /* Insert the times needed by the SYS_TIMES kernel call in the message. 
    * The clock's interrupt handler may run to update the user or system time
    * while in this code, but that cannot do any harm.
    */

kernel/system/do_trace.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_TRACE
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m2_i1:	CTL_PROC_NR	process that is traced
  *    m2_i2:    CTL_REQUEST	trace request
  *    m2_l1:    CTL_ADDRESS     address at traced process' space

kernel/system/do_umap.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_UMAP
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m5_i1:	CP_SRC_PROC_NR	(process number)	
  *    m5_c1:	CP_SRC_SPACE	(segment where address is: T, D, or S)
  *    m5_l1:	CP_SRC_ADDR	(virtual address)	

kernel/system/do_unused.c

@@ -1,4 +1,4 @@
-/* This file provides a catch-all handler for unused system calls. A system 
+/* This file provides a catch-all handler for unused kernel calls. A kernel 
  * call may be unused when it is not defined or when it is disabled in the
  * kernel's configuration.
  */

kernel/system/do_vcopy.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_VIRVCOPY, SYS_PHYSVCOPY 
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m1_i3:	VCP_VEC_SIZE		size of copy request vector 
  *    m1_p1:	VCP_VEC_ADDR		address of vector at caller 
  *    m1_i2:	VCP_NR_OK		number of successfull copies	
@@ -23,7 +23,7 @@ register message *m_ptr;	/* pointer to request message */
 {
 /* Handle sys_virvcopy() and sys_physvcopy() that pass a vector with copy
  * requests. Although a single handler function is used, there are two
- * different system calls so that permissions can be checked.
+ * different kernel calls so that permissions can be checked.
  */
   int nr_req;
   int caller_pid;

kernel/system/do_vdevio.c

@@ -1,7 +1,7 @@
-/* The system call implemented in this file:
+/* The kernel call implemented in this file:
  *   m_type:	SYS_VDEVIO
  *
- * The parameters for this system call are:
+ * The parameters for this kernel call are:
  *    m2_i3:	DIO_REQUEST	(request input or output)	
  *    m2_i1:	DIO_TYPE	(flag indicating byte, word, or long)
  *    m2_p1:	DIO_VEC_ADDR	(pointer to port/ value pairs)	

kernel/table.c

@@ -73,7 +73,7 @@ PUBLIC char *t_stack[TOT_STACK_SPACE / sizeof(char *)];
 
 /* Define kernel calls that processes are allowed to make. This is not looking
  * very nice, but we need to define the access rights on a per call basis. 
- * Note that the system services manager has all bits on, because it should
+ * Note that the reincarnation server has all bits on, because it should
  * be allowed to distribute rights to services that it starts. 
  */
 #define c(n)	(1 << ((n)-KERNEL_CALL))

kernel/utility.c

@@ -127,7 +127,7 @@ PRIVATE void kputc(c)
 int c;					/* character to append */
 {
 /* Accumulate a single character for a kernel message. Send a notification
- * the to output driver if an END_OF_KMESS is encountered. 
+ * to the output driver if an END_OF_KMESS is encountered. 
  */
   if (c != END_OF_KMESS) {
       kmess.km_buf[kmess.km_next] = c;	/* put normal char in buffer */

tools/mkboot

@@ -70,6 +70,7 @@ hdboot)
 
 	if [ -z "$revision" ]
 	then
+		target="${version}"
 		revision=0
 	elif [ -f $rootdir/boot/image/$target ]
 	then
@@ -80,8 +81,8 @@ hdboot)
 			exit 0
 		fi
 		revision=`expr $revision + 1`
+		target="${version}r${revision}"
 	fi
-	target="${version}r${revision}"
 
 	set -- `ls -t $rootdir/boot/image`
 

tools/release.sh

@@ -66,12 +66,13 @@ BS=4096
 
 HDEMU=0
 COPY=0
+CVSTAG=HEAD
 
-while getopts "chaq?" c
+while getopts "r:ch?" c
 do
 	case "$c" in
 	\?)
-		echo "Usage: $0 [-a] [-c] [-h]" >&2
+		echo "Usage: $0 [-c] [-h] [-r <tag>]" >&2
 		exit 1
 	;;
 	h)
@@ -83,9 +84,14 @@ do
 		echo " * Copying, not CVS"
 		COPY=1
 		;;
+	r)	
+		CVSTAG=$OPTARG
+		;;
 	esac
 done
 
+echo "CVS tag: $OPTARG"
+
 ISO=${ISO}.iso
 ISOGZ=${ISO}.gz
 echo "Making $ISOGZ"
@@ -167,7 +173,7 @@ chmod -R u+w $RELEASEDIR/usr/lib
 if [ "$COPY" -ne 1 ]
 then
 	echo " * Doing new cvs export"
-	( cd $RELEASEDIR/usr && mkdir src && cvs export -rHEAD src )
+	( cd $RELEASEDIR/usr && mkdir src && cvs export -r$CVSTAG src )
 else
 	( cd .. && make clean )
 	srcdir=/usr/src

tools/release/cd/README.TXT

@@ -6,8 +6,8 @@ Operating Systems Design and Implementation, 3rd Edition
 by Andrew S. Tanenbaum and Albert S. Woodhull
 Text ISBN: 0-13-142938-8
 CD ISBN:   0-13-142987-6
-   Copyright 2006, 1997, 1987 Pearson Education, Inc.
-   MINIX 3 Copyright 2006, 1997, 1987 Vrije Universiteit
+   MINIX 3 Copyright 2006, 1997, 1987, Vrije Universiteit, Amsterdam, The Netherlands
+   CD-ROM  Copyright 2006, 1997, 1987, Pearson Education, Inc., Upper Saddle River, NJ
 All rights reserved.
 
 ------------------------------------------------------------------------
@@ -63,7 +63,9 @@ This CD contains:
    - LISTING.PS	     Appendix B in PostScript
    - LISTING.PDF     Appendix B in PDF
    - INDEX.TXT	     Index of files
-
+   - BOOKSRC.TGZ     gzipped UNIX tar file of the files listed in the book
+                     plus modified Makefiles and additional files to
+                     compile the book subset of Minix.
 
 There are also many invisible files used for installing MINIX 3.