134 lines
5.0 KiB
Groff
134 lines
5.0 KiB
Groff
." Automatically generated text
|
|
.TH 1 "August 31, 2006" "OSS" "User Commands"
|
|
.SH NAME
|
|
ossmix - Open Sound System command-line mixer program.
|
|
|
|
.SH SYNOPSIS
|
|
ossmix [-d <dev#>] [-chqD] [control name] [value]
|
|
|
|
.SH DESCRIPTION
|
|
ossmix is a simple command-line mixer utility that is used to display the mixer
|
|
settings of physical and virtual audio devices. OSS version 4 has an extended
|
|
mixer API which supports some device specific features that may not available
|
|
using other mixer applications.
|
|
|
|
.SH OPTIOMS
|
|
-D Display device information.
|
|
-c Dump mixer settings for all mixers.
|
|
-h Display usage information.
|
|
-q Quiet mode.
|
|
-v[1|2] Verbose mode. -v2 prints more detailed infoamation than -v1.
|
|
ctrl# value Change value of a mixer control.
|
|
<no arg> Display current/possible settings.
|
|
|
|
.SH USAGE
|
|
ossmix without any arguments displays the current settings of the
|
|
default mixer device (usually the motherboard sound chip). This
|
|
printout can also be used to find out the supported control names and
|
|
their possible values. Currently all controls accept an ON/OFF value, a
|
|
mono value (0 to 100) or a stereo value (left:right where both channel
|
|
volumes can be between 0 and 100). The value can also be expressed in a
|
|
relative form (e.g. +1 to add 1 to the previous volume).
|
|
The following is a sample printout produced by ossmix:
|
|
|
|
Selected mixer 0/Creative AudioPCI
|
|
Known controls are:
|
|
vol <both/leftvol>[:<rightvol>] (currently 50:50)
|
|
pcm <both/leftvol>[:<rightvol>] (currently 50:50)
|
|
speaker <monovol> (currently 21)
|
|
line <both/leftvol>[:<rightvol>] (currently 32:32)
|
|
line.rec ON|OFF (currently OFF)
|
|
mic <monovol> (currently 16)
|
|
mic.rec ON|OFF (currently ON)
|
|
cd <both/leftvol>[:<rightvol>] (currently 100:100)
|
|
cd.rec ON|OFF (currently OFF)
|
|
pcm2 <both/leftvol>[:<rightvol>] (currently 75:75)
|
|
line1 <both/leftvol>[:<rightvol>] (currently 32:32)
|
|
line1.rec ON|OFF (currently OFF)
|
|
line2 <monovol> (currently 32)
|
|
line2.rec ON|OFF (currently OFF)
|
|
line3 <monovol> (currently 0)
|
|
line3.rec ON|OFF (currently OFF)
|
|
mic.micboost ON|OFF (currently ON)
|
|
mic.micbias ON|OFF (currently ON)
|
|
mute.pcmmute ON|OFF (currently OFF)
|
|
mute.pcm2mute ON|OFF (currently OFF)
|
|
mute.micmute ON|OFF (currently OFF)
|
|
mute.cdmute ON|OFF (currently OFF)
|
|
mute.linemute ON|OFF (currently OFF)
|
|
mute.line1mute ON|OFF (currently OFF)
|
|
mute.line2mute ON|OFF (currently OFF)
|
|
mute.line3mute ON|OFF (currently OFF)
|
|
|
|
.SH SELECTING MIXER DEVICE
|
|
It's possible to select the mixer device by using the -d<mixernumber>
|
|
command line argument. This argument (when used) should be the first one
|
|
on the command line. By default the mixer number 0 will be accessed.
|
|
To find the available mixer devices, type ossinfo -x and look
|
|
under the Mixers heading for available mixer devices.
|
|
|
|
.SH CHANGING MIXER SETTINGS
|
|
Changing the values is done just like with the original "mixer" applet.
|
|
For example:
|
|
|
|
ossmix pcm 50:60
|
|
|
|
The above sets the pcm control (audio playback volume) so that the left
|
|
channel volume is 50 and the right channel volume is 60. With just
|
|
"ossmix pcm 50" the both channel volumes will be set to 50.
|
|
|
|
In addition to the old mixer there are now some (usually ON/OFF) settings.
|
|
These settings are device specific and don't work with all soundcards.
|
|
The easiest way to find them out is to start ossmix without command line
|
|
arguments (other than -d#).
|
|
|
|
Some control names contain a dot ("."). This dot is required when changing
|
|
the value. For example: "ossmix -d0 mic.micboost ON".
|
|
|
|
."USING OSSMIX WITH A MIDI CONTROLLED MIXER
|
|
."The ossmix program has capability to listen MIDI main volume controller
|
|
."messages from a MIDI port. You can assign a ossmix control to each MIDI
|
|
."channel. After receiving a channel main volume change message ossmix will then
|
|
."change the mixer level of the volume control assigned to the channel. In this
|
|
."mode ossmix will not exit (you need to kill it manually).
|
|
."
|
|
."This mode is very useful if you need to make several rapid mixer changes
|
|
."simultaneously.
|
|
."
|
|
."To use this mode you need to give the MIDI device file and a list of the
|
|
."volume sliders on command line. For example:
|
|
."
|
|
." ossmix -d1 -m/dev/midi00 vol mic pcm line gain.out1/2 gain.in3/4
|
|
."
|
|
."After that the MIDI channels will be assigned in the following way:
|
|
."
|
|
." Ch 0 = "vol"
|
|
." Ch 1 = "mic"
|
|
." Ch 2 = "pcm"
|
|
." Ch 3 = "line"
|
|
." Ch 4 = "gain.out1/2"
|
|
." Ch 5 = "gain.in3/4"
|
|
."
|
|
."Other MIDI channels (6 to 15) will be ignored.
|
|
."
|
|
."Only mono and stereo slider type controls can be assigned to MIDI channels.
|
|
."Both stereo channels will be set to the same volume (there is no balance
|
|
."support).
|
|
."
|
|
."After starting ossmix you should move the sliders on the external fader box
|
|
."so that ossmix can figure out their current settings.
|
|
."
|
|
."At this moment only MIDI fader boxes that send only main volume change messages
|
|
."are supported (any other MIDI data will make ossmix to behave incorrectly).
|
|
."For example the FM3 MIDI Mixer (AKA "FaderBaby") by JLCooper is compatible
|
|
."with ossmix.
|
|
."
|
|
.SH FILES
|
|
/usr/bin/ossmix
|
|
|
|
.SH SEE ALSO
|
|
ossdevlinks(1), ossxmix(1), savemixer(1)
|
|
|
|
.SH AUTHOR
|
|
4Front Technologies
|