93 lines
4.0 KiB
Groff
93 lines
4.0 KiB
Groff
." Automatically generated text
|
|
.TH 1 "August 31, 2006" "OSS" "User Commands"
|
|
.SH NAME
|
|
osstest - Open Sound System audio self test applet.
|
|
|
|
.SH DESCRIPTION
|
|
The osstest applet is a simple test application that can be used to test
|
|
functionality of the sound hardware installed in the system.
|
|
|
|
osstest performs a playback test for each installed audio device. If there
|
|
are any "machine detectable" problems they will be reported. You will first
|
|
hear an audio sample played on the left speaker, then the right speaker and
|
|
finally in stereo on both speakers.
|
|
|
|
It's user's responsibility to listen if the test sound is audible. If no
|
|
sound output can be heard the possible reason is one of the following:
|
|
|
|
1. An error was reported by osstest. In this case there will usually not be
|
|
any sound output. The error needs to be fixed before running osstest
|
|
again.
|
|
2. There is no headphones or speakers connected. Or the connection is not
|
|
made correctly.
|
|
3. The mixer volume level is set to a too low value. By default it should
|
|
be OK. The mixer level can be adjusted using the mixer, ossmix and ossxmix
|
|
utilities distributed with OSS.
|
|
4. Some notebooks have nonstandard volume control and/or speaker selection
|
|
hardware that is not supported by OSS. It's very likely that OSS doesn't
|
|
support such vendor specific additions.
|
|
|
|
If no errors were reported and the test sound was audible it means that
|
|
OSS and your sound hardware is functioning correctly. If you still encounter
|
|
problems with some sound applications the reason is almost certainly in
|
|
the application. Check it's configuration or try to use another equivivalent
|
|
application.
|
|
|
|
If you are having problems with JDS, KDE and/or Gnome system sounds, you need
|
|
to make sure that OSS gets started before the GUI environment. Refer to your
|
|
operating system's startup procedures.
|
|
|
|
.SH SAMPLE RATE DRIFT
|
|
|
|
The osstest utility measures a sample rate drift value after playing
|
|
back the test sound. Ideally it should be 0% but in practice there
|
|
will be an error of few percents. 0% means that the 48000 Hz test file
|
|
was played exactly at 48000 Hz sampling rate.
|
|
|
|
The sample rate measurement is based on the system timer which has limited
|
|
precision. It's likely that less than 1% differenc between the nominal and
|
|
the measured sampling rates are actually caused by an error in the measurement.
|
|
For this reason the drift reported by osstest should not be used as any kind of
|
|
quality measurement. However if the drift is very large it means that there is
|
|
something wrong in the system. The oscillator chip used with the sound chip is
|
|
broken or the system clock is running at a wrong speed.
|
|
|
|
.SH USING OSSTEST MANUALLY
|
|
|
|
The osstest utility is located in the /usr/bin directory. It can be run
|
|
manually to test functionality of OSS and your sound hardware. When invoked
|
|
without any command line parameters osstest performs the default test on all
|
|
devices. However it will skip some of the devices base on the following rules.
|
|
|
|
.IP \(bu 3
|
|
It is possible to test just one of the available audio devices by giving
|
|
its number on command line (for example osstest 1). Use the device index
|
|
numbers reported by "ossinfo -a".
|
|
.IP \(bu 3
|
|
Use the -l command line option to loop the test infinitely.
|
|
.IP \(bu 3
|
|
Virtual mixer devices will not be tested. Use the -V command line option to
|
|
force test of virtual devices.
|
|
.IP \(bu 3
|
|
The actual (physical) audio devices will be tested directly (bypassing
|
|
virtual mixer). If you want to test playback through vmix then use the
|
|
-V option.
|
|
.IP \(bu 3
|
|
Multiple device files related with the same physical device will not
|
|
be tested. Only the first one gets tested while the remaining ones will be
|
|
skipped. At this moment there is no way to force osstest to test this kind of
|
|
devices.
|
|
.IP \(bu 3
|
|
Only stereo devices will be tested. Future versions of osstest will be
|
|
able to test mono and multi channel devices too. Also osstest requires that
|
|
the device supports the 16 bit signed format and 48kHz sampling rate.
|
|
|
|
.SH FILES
|
|
/usr/bin/osstest
|
|
|
|
.SH SEE ALSO
|
|
savemixer(1)
|
|
|
|
.SH AUTHOR
|
|
4Front Technologies
|