at_wini was previously hardcoded to present ATAPI devices as having a
size of 800 MiB, which was enough for CDs but not for DVDs. This
patch increases the device size to 8500 MiB, which should be large
enough to cover all DVDs.
Change-Id: I7d3192e4ecd0708a655663c1007ff517ed969580
When possible, network drivers are now started automatically. That
means that netconf(8)'s network driver selection has become obsolete.
This patch changes netconf(8) to allow the user to specify a network
configuration (currently one of DHCP IPv4+IPv6, DHCP IPv4-only,
manual IPv4-only) for any hardware network interfaces that are
currently present.
Selection of network drivers that require manual configuration first
(mainly old ISA cards) is still supported, but now as a special case.
Change-Id: I6208fc75192eb7f0b061862aaf7507f71a620da4
When performing a restart (CSR0 STOP, STRT), the behavior regarding
the NIC's current RX/TX descriptor ring counters varies between cards:
older LANCE cards do not reset the counters; newer PCnet cards do
reset them; VirtualBox's emulation is once again broken in that it
claims to emulate newer cards but implements the older behavior.
Changing the card's receive mode requires such a restart, and now that
the system can actually change receive modes dynamically as part of
normal network operation, this results in the lance driver breaking
all the time on at least VirtualBox.
Instead of trying to figure out exactly what is going on with the
counters during a restart, we now simply perform a full-blown
reinitialization every time the NIC is restarted. That leaves no
ambiguity regarding the counters, and appears to be what drivers on
other OSes do as well. As a bonus, this approach actually saves code.
Change-Id: I60fad2df6de4616d5de2cec39c09b60c15d854fb
This is a driver-breaking update to the netdriver library, which is
used by all network drivers. The aim of this change is to make the
library more compatible with NetBSD, and in particular with various
features that are expected to be supported by the NetBSD userland.
The main changes made by this patch are the following:
- each network driver now has a NetBSD-style short device name;
- drivers are not expected to receive packets right after startup;
- extended support for receipt modes, including multicast lists;
- support for multiple parallel send, receive requests;
- embedding of I/O vectors in send and receive requests;
- support for capabilities, including checksum offloading;
- support for reporting link status updates to the TCP/IP stack;
- support for setting and retrieving media status;
- support for changing the hardware (MAC) address;
- support for NetBSD interface flags IFF_DEBUG, IFF_LINK[0-2];
- support for NetBSD error statistics;
- support for regular time-based ("tick") callbacks.
IMPORTANT: this patch applies a minimal update to the existing drivers
in order to make them work at all with the new netdriver library. It
however does *not* change all drivers to make use of the new features.
In fact, strictly speaking, all drivers are now violating requirements
imposed by the new library in one way or another, most notably by
enabling packet receipt when starting the driver. Changing all the
drivers to be compliant, and to support the newly added options, is
left to future patches. The existing drivers should currently *not*
be taken as examples of how to implement a new network driver!
With that said, a few drivers have already been changed to make use of
some of the new features: fxp, e1000, rtl8139, and rtl8169 now report
link and media status, and the last three of those now support setting
the hardware MAC address on the fly. In addition, dp8390 has been
changed to default to PCI autoconfiguration if no configuration is
specified through environment variables.
Change-Id: I4b3ea9c0b9bc25d5b0609c6ff256fb0db71cdc42
With TIOCPKT enabled, each piece of output is preceded by a zero byte
on the PTY master. In addition, a non-zero byte is a flags field
that conveys information about changes on the pseudoterminal. This
patch implements the former, but not the latter. That is enough to
get telnetd(8) going, however. TIOCPKT support may be extended later.
Change-Id: I6ef9cc8cf1b4406147b088400fc8499684b62a30
IMPORTANT: this change has a docs/UPDATING entry!
This patch performs an initial import of the infrastructure and a
subset of the NetBSD set of rc startup and shutdown scripts. The
"initial" refers to the fact that this is not yet a full switch to the
NetBSD rc system: the MINIX ramdisk rc script, which (typically) runs
as the first thing, is kept as is. After mounting the root file
system, the ramdisk rc script will start the NetBSD rc infrastructure
by invoking /etc/rc, however. The regular MINIX startup-and-shutdown
script has been moved from /etc/rc to /etc/rc.minix, and is now
invoked as part of the NetBSD rc infrastructure through a bridge rc
script /etc/rc.d/minixrc. /etc/rc.minix invokes /usr/etc/rc as before.
Switching over the ramdisk to the NetBSD system and decomposing the
MINIX rc.minix script into smaller components are left to future work.
Also, the current pkgsrc etc/rc.d auto-start functionality is left as
is, even though it should be removed (see the etc/usr/rc comment).
Change-Id: Ia96cae7c426e94b85c67978dc1307dacc4b09fc5
Performing the update at any later time may cause rc scripts to work
with a wrong date, which may have side effects, such as databse files
getting regenerated on every boot.
Change-Id: Idfdbf67ad285300c982d95769007dc88c522b908
IMPORTANT: this change has a docs/UPDATING entry!
This rename is unfortunately necessary because NetBSD has decided to
create its own service(8) utility, and we will want to import theirs
as well. The two can obviously not coexist.
Also move ours from /bin to /sbin, as it is a superuser-only utility.
Change-Id: Ic6e46ffb3a84b4747d2fdcb0d74e62dbea065039
IMPORTANT: this change has a docs/UPDATING entry!
This change is a long overdue switch-over from the old MINIX set of
user and group accounts to the NetBSD set. This switch-over is
increasingly important now that we are importing more and more
utilities from NetBSD, several of which expect various user accounts
to exist. By switching over in one go, we save ourselves various
headaches in the long run, even if the switch-over itself is a bit
painful for existing MINIX users.
The newly imported master.passwd and group files have three exceptions
compared to their NetBSD originals:
1. There is a custom "service" account for MINIX 3 services. This
account is used to limit run-time privileges of various system
services, and is not used for any files on disk. Its user ID may
be changed later, but should always correspond to whatever the
SERVICE_UID definition is set to.
2. The user "bin" has its shell set to /bin/sh, instead of NetBSD's
/sbin/nologin. The reason for this is that the test set in
/usr/tests/minix-posix will not be able to run otherwise.
3. The group "operator" has been set to group ID 0, to match its old
value. This tweak is purely for transitioning purposes: as of
writing, pkgsrc packages are still using root:operator as owner and
group for most installed files. Sometime later, we can change back
"operator" to group ID 5 without breaking anything, because it does
not appear that this group name is used for anything important.
Change-Id: I689bcfff4cf7ba85c27d1ae579057fa3f8019c68
Now that clock_t is an unsigned value, we can also allow the system
uptime to wrap. Essentially, instead of using (a <= b) to see if time
a occurs no later than time b, we use (b - a <= CLOCK_MAX / 2). The
latter value does not exist, so instead we add TMRDIFF_MAX for that
purpose.
We must therefore also avoid using values like 0 and LONG_MAX as
special values for absolute times. This patch extends the libtimers
interface so that it no longer uses 0 to indicate "no timeout".
Similarly, TMR_NEVER is now used as special value only when
otherwise a relative time difference would be used. A minix_timer
structure is now considered in use when it has a watchdog function set,
rather than when the absolute expiry time is not TMR_NEVER. A few new
macros in <minix/timers.h> help with timer comparison and obtaining
properties from a minix_timer structure.
This patch also eliminates the union of timer arguments, instead using
the only union element that is only used (the integer). This prevents
potential problems with e.g. live update. The watchdog function
prototype is changed to pass in the argument value rather than a
pointer to the timer structure, since obtaining the argument value was
the only current use of the timer structure anyway. The result is a
somewhat friendlier timers API.
The VFS select code required a few more invasive changes to restrict
the timer value to the new maximum, effectively matching the timer
code in PM. As a side effect, select(2) has been changed to reject
invalid timeout values. That required a change to the test set, which
relied on the previous, erroneous behavior.
Finally, while we're rewriting significant chunks of the timer code
anyway, also covert it to KNF and add a few more explanatory comments.
Change-Id: Id43165c3fbb140b32b90be2cca7f68dd646ea72e
Scripts for generating boot-to-ramdisk images are now available. These
can be used for example to boot from PXE or from a USB stick, as the
ramdisk are self-contained and do not rely on any block devices after
being loaded into RAM.
The image generation framework has also been slightly cleaned up in
order to better accomodate tarball sets bundling in images.
Change-Id: I65a176832bd0d6954b430fa8305f90af0bd606c1
While BSD make support both $() and ${} around variables, the NetBSD
source tree uses only ${} by convention.
Imported software is left as is, and sometimes $() is used when the
containing Makefile/Makefile fragment is used both by GNU make and BSD
make, as it can happen for the tools, and other parts as well which are
compiled using the host make tool.
Change-Id: Ic7d480812fde53e7e3e95275a30a3b720c95cc15
Adapt libc devname(3) to make use of it, so that such device name
queries are now several orders of magnitude faster. The database
is created and updated at system bootup time.
Change-Id: I0cbcb24c7d47577d4d6af9c8290c21ee4df9a0ff
It was not used or tested on x86 in practice, and the automated arm
tests should obviate the need for a dummy-only x86 implementation.
It should be noted that this change is merely the simplest way to
deal with conflicts with live update (for the second time now).
Change-Id: I6e066c4659c6213cd556144271784588356b140f
This brings our tree to NetBSD 7.0, as found on -current on the
10-10-2015.
This updates:
- LLVM to 3.6.1
- GCC to GCC 5.1
- Replace minix/commands/zdump with usr.bin/zdump
- external/bsd/libelf has moved to /external/bsd/elftoolchain/
- Import ctwm
- Drop sprintf from libminc
Change-Id: I149836ac18e9326be9353958bab9b266efb056f0
The CD now boots directly from the ISO 9660 filesystem instead of using
MBR partitioning with Minix file systems. This saves some space on the
CD and reduces memory requirements by some unknown amount as the root
ramdisk is completely eliminated.
The x86 hard drive image creation is also rewritten in the same
fashion.
The setup is modified to be more NetBSD-like (unpacking sets
tarballs instead of blindly copying the CD contents). Splitting MINIX
into sets is done in another commit due to it being a nightmare to
rebase.
Since MINIX lacks union mounts for now, a bunch of ramdisks are
generated at run-time to make parts of the filesystem writeable for the
CD. This solution isn't ideal, but it's enough for an installation CD.
Change-Id: Icbd9cca4dafebf7b42c345b107a17679a622d5cd
Please note that this information is for use by system services only!
The clock facility is not ready to be used directly by userland, and
thus, this kernel page extension is NOT part of the userland ABI.
For service programmers' convenience, change the prototype of the
getticks(3) to return the uptime clock value directly, since the call
can no longer fail.
Correct the sys_times(2) reply message to use the right field type
for the boot time.
Restructure the kernel internals a bit so as to have all the clock
stuff closer together.
Change-Id: Ifc050b7bd253aecbe46e3bd7d7cc75bd86e45555
Instead of importing an external _minix_kerninfo variable, any code
using the shared kernel page should now call get_minix_kerninfo(3).
Since this is the only logical name for such a function, rename the
previous get_minix_kerninfo call to ipc_minix_kerninfo.
Change-Id: I2e424b6fb55aa55d3da850187f1f7a0b7cbbf910
The 'memory' service has holes in its data section, which causes
problems during state transfer. Since VM cannot handle page faults
during a multicomponent-with-VM live update, the state transfer must
ensure that no page faults occur during copying. Therefore, we now
query VM about the regions to copy, thus skipping holes. While the
solution is not ideal, it is sufficiently generic that it can be used
for the data section state transfer of all processes, and possibly
for state transfer of other regions in the future as well.
Change-Id: I2a71383a18643ebd36956c396fbd22c8fd137202
The following services have been updated to support stateful restarts:
- Drivers: tty
- Filesystems: isofs, mfs, pfs, libvtreefs-based file servers
- System servers: tty, ds, pm, vfs, vm
Change-Id: Ie84baa3ba1774047b3ae519808fe4116928edabb
