Also put in a crude way to clean up zombies when ftpd(8) is running
in daemon mode, because we do not yet support SA_NOCLDWAIT.
Change-Id: I8a7db1d665c432d736db833b0022d0340764db1f
Like arp(8), this utility already uses the NetBSD 8 protocol for
talking to the operating system through routing sockets.
Like arp(8), this utility is not fully functional, due to limitations
of lwIP. While ndp(8) should provide a proper (read-only) view of the
contents of the Neighbor Discovery table, any attempts to modify the
table will fail. In addition, various other ndp(8) features are not
supported. On MINIX 3, the prefix and default router lists are not
managed by the operating system however, but rather by dhcpcd(8);
therefore, an implementation of the features related to those lists
would not provide any actual functionality.
Change-Id: I479bfc8141ba69fe50c1b2f7091933267ce6fa3e
For now, printing of Sun RPC requests is disabled because we do not
yet have the RPC header files. This should affect basically noone,
as we do not have any RPC-based programs yet, for the same reason.
Change-Id: Ie7818faaaacdc104d8b2c37a68866b4ce18247d6
As part of this, we import bpf_filter.c from NetBSD. Even though that
file is part of the NetBSD kernel, it is also used by userland (as is
clear here). Our LWIP service has its own bpf_filter.c implementation
but that implementation has certain limits (e.g. on program size) that
are fine for a system service but should not apply to userland.
The libpcap code has a number of blocks guarded by __NetBSD__, but
none of those blocks apply to MINIX 3. In particular, some of the
alignment logic used for NetBSD may in fact not work in our case.
Change-Id: Ib187e22d627c929e111d5d4a991c3bee3c0154cb
Also known as ISC bind. This import adds utilities such as host(1),
dig(1), and nslookup(1), as well as many other tools and libraries.
Change-Id: I035ca46e64f1965d57019e773f4ff0ef035e4aa3
The port could be improved by adding support for pselect(2).
Other than that, this port has a few MINIX-specific changes:
- we undefine IN_IFF_ flags to stop dhcpcd from thinking that we have
operating system support for link-local IPv4 address management;
- we work around one crash bug that seems triggered by using dhcpcd
on some but not all interfaces;
- we add "noalias" to the default dhcpcd.conf(5) configuration file.
Change-Id: I8a81c2c2af353c5ce08335673b1ab2d4b39178da
Behaviorally this port should already be largely on par with the
NetBSD 8 version, in that it sets the RTF_LLDATA flag on routing
socket requests to indicate that they target link-local data.
Many parts of the arp(8) functionality are currently not yet supported
by the operating system, largely due to lwIP not exposing appropriate
means of implementing them.
Change-Id: Icfac054b4deddda03eee4acf0e261aa48cd031ba
The port forces the use of sysctl(7), as obtaining information through
KVM is not and will never be viable. The sysctl mode of netstat(1) is
currently somewhat limited and buggy, though. We fix a few minimal
issues, but more improvements will have to come from NetBSD reimports.
Some of netstat(1)'s views are currently not supported by the
operating system. Later improvements on this point will not require
changes to the imported code, though.
Change-Id: If74a6811f0fc81bd1ecc31010a28379b14b2a0eb
Not all of its functionality is actually implemented in the operating
system. In addition, a few modules (agr, vlan) have been disabled
because we have not imported the necessary headers yet.
Change-Id: I4c9271065d640bd9112b4bd27e2652e1d51b18b4
With TIOCPKT enabled, each piece of output is preceded by a zero byte
on the PTY master. In addition, a non-zero byte is a flags field
that conveys information about changes on the pseudoterminal. This
patch implements the former, but not the latter. That is enough to
get telnetd(8) going, however. TIOCPKT support may be extended later.
Change-Id: I6ef9cc8cf1b4406147b088400fc8499684b62a30
Also retire support for the MINIX versions of /etc/hosts and
/etc/resolv.conf. These files will be brought back with NetBSD
imports, although like NetBSD, MINIX 3 will be using external
resolvers directly from then on. Since resolv.conf is hand-created
rather than installed, we do not mark it as obsolete.
Change-Id: Ie6154d5a4d8d977c19b9754bf920ae868680e9d1
This commit (temporarily) leaves MINIX 3 without a TCP/IP service.
Thanks go out to Philip Homburg for providing this TCP/IP stack in the
first place. It has served MINIX well for a long time.
Change-Id: I0e3eb6fe64204081e4e3c2b9d6e6bd642f121973
This needs to be done before retiring inet itself, since these
utilities include headers from inet directly.
Also retire the now-obsolete paramvalue(3).
Change-Id: I9b27771190a6a32ee533b0c0d9d37f61a16ee36c
This new implementation of the UDS service is built on top of the
libsockevent library. It thereby inherits all the advantages that
libsockevent brings. However, the fundamental restructuring
required for that change also paved the way for resolution of a
number of other important open issues with the old UDS code. Most
importantly, the rewrite brings the behavior of the service much
closer to POSIX compliance and NetBSD compatibility. These are the
most important changes:
- due to the use of libsockevent, UDS now supports multiple suspending
calls per socket and a large number of standard socket flags and
options;
- socket address matching is now based on <device,inode> lookups
instead of canonized path names, and socket addresses are no longer
altered either due to canonization or at connect time;
- the socket state machine is now well defined, most importantly
resolving the erroneous reset-on-EOF semantics of the old UDS, but
also allowing socket reuse;
- sockets are now connected before being accepted instead of being
held in connecting state, unless the LOCAL_CONNWAIT option is set
on either the connecting or the listening socket;
- connect(2) on datagram sockets is now supported (needed by syslog),
and proper datagram socket disconnect notification is provided;
- the receive queue now supports segmentation, associating ancillary
data (in-flight file descriptors and credentials) with each segment
instead of being kept fully separately; this is a POSIX requirement
(and needed by tmux);
- as part of the segmentation support, the receive queue can now hold
as many packets as can fit, instead of one;
- in addition to the flags supported by libsockevent, the MSG_PEEK,
MSG_WAITALL, MSG_CMSG_CLOEXEC, MSG_TRUNC, and MSG_CTRUNC send and
receive flags are now supported;
- the SO_PASSCRED and SO_PEERCRED socket options are replaced by
LOCAL_CREDS and LOCAL_PEEREID respectively, now following NetBSD
semantics and allowing use of NetBSD libc's getpeereid(3);
- memory usage is reduced by about 250 KB due to centralized in-flight
file descriptor tracking, with a limit of OPEN_MAX total rather than
of OPEN_MAX per socket;
- memory usage is reduced by another ~50 KB due to removal of state
redundancy, despite the fact that socket path names may now be up to
253 bytes rather than the previous 104 bytes;
- compared to the old UDS, there is now very little direct indexing on
the static array of sockets, thus allowing dynamic allocation of
sockets more easily in the future;
- the UDS service now has RMIB support for the net.local sysctl tree,
implementing preliminary support for NetBSD netstat(1).
Change-Id: I4a9b6fe4aaeef0edf2547eee894e6c14403fcb32
A single function may be used to handle the implementation of more
than one node. In some cases, the behavior of that function may
depend on the path name used to reach the node. Therefore, provide
the full path name as part of the call information.
As a result, RMIB has to save the paths for each of its remote MIB
mount points. That in turn also allows it to autonomously remount its
mount points after a MIB service restart, thus bringing us a step
closer to proper recovery after a MIB crash without requiring the
service using RMIB to perform explicit steps. As before, the missing
ingredient is actual notification of MIB service restarts, and proper
support for *that* will likely require changes to the DS service.
Change-Id: Ic0c79931d6f3a76c2c998047f8b47350fd0fa5b0
The service-only getepinfo(2) PM call returns information about a
given endpoint. This patch extends that call so that it returns
enough information to allow correctly filling a sockcred structure.
A new getsockcred(3) function is added to libsys to fill an actual
sockcred structure with the obtained information. However, for the
caller's convenience, the groups list is kept separate.
Change-Id: I9f1a6d1a221c77eabaa3498ff4ec9a5fb922e4fd
The getnucred() function was used by UDS to obtain credentials of user
processes in a form used in the UDS API, namely the ucred structure.
Since the NetBSD merge, this structure has changed drastically (aside
from being renamed to "uucred"), and it is no longer in UDS's best
interest to use this structure internally. Therefore, getnucred() is
no longer a useful API either, and instead we directly use the
previously private getepinfo() function to obtain credentials.
Change-Id: I80bc809de716ec0a9b7497cb109d2f2708a629d5
This patch prepares for moving of the creation of socket files on the
file system from the libc bind(2) stub into the UDS service. This
change is necessary for the socket type agnostic libc implementation.
The change is not yet activated - the code that is not yet used is
enclosed in "#if NOT_YET" blocks. The activation needs to be atomic
with UDS's switch to libsockdriver; otherwise, user applications may
break.
As part of the change, various UDS bind(2) semantics are changed to
match the POSIX standard and other operating systems. In
implementation terms, the service-only VFS API checkperms(2) is
renamed to socketpath(2), and extended with a new subcall which
creates a new socket file. An extension to test56 checks the new
bind(2) semantics of UDS, although most new tests are still disabled
until activation as well.
Finally, as further preparation for a more structural redesign of the
UDS service, also return the <device,inode> number pair for the
created or checked file name, and make returning the canonized path
name optional.
Change-Id: I892d04b3301d4b911bdc571632ddde65fb747a8a
