Split the process to fetch GNU tools (until now embedded
within tools/Makefile.gnuhost) into a new Makefile.fetchgnu,
MINIX-specific hence relocated, which is to be also used
to fetch sources even when not building the tools.
Use it for binutils too.
Improve documentation.
Also do not run configure on each run when MKUPDATE=yes
The .WAIT serialization instruction between fetching and other
configure sources was raising a new run of configure at each
compilation. Avoid it by using two rules.
Change-Id: Ie24950ccbb5c5067f3c1ea57b7bd8294e4c9445e
The warnings in test47 seem to be a symptom of a larger problem,
i.e., not an issue with the test set code but rather with the GCC
configuration. Hopefully the switch to LLVM will resolve those.
Change-Id: Ic9fa3b8bc9b728947c993f2e1ed49d9a3b731344
Ever since a VM allocation strategy change, this test is fully
dysfunctional. It should be repaired and added to the regular
test set, but that will require some work.
For now, keep it in reasonable shape.
Reported by dcb314.
This closes#153.
Change-Id: Ia57bdfdf6a3fc8d47cae76a0be9881fb4d796f6d
If libmthread runs into a memory allocation failure while attempting
to enlarge its thread pool, it does not free up any preliminary
allocations made so far.
Reported by dcb314.
This closes#152.
Change-Id: Ib882a4544e4802a0eb0a53446b43997876cde633
Reported by dcb314. Recommendations adopted as is.
This closes#137, closes#138, closes#139, and hopefully I got that
right this time.
Change-Id: I79774f4c398495dba19dec43fbc3f79afd186843
All functions prefixed with bdev_ are moved into bdev.c, and those
prefixed with cdev_ are now in cdev.c. The code in both files are
converted to KNF. The little (IOCTL-related) code left in device.c
is also cleaned up but should probably be moved into other existing
source files. This is left to a future patch. In general, VFS is
long overdue for a source code rebalancing, and the patch here is
only a step in the right direction.
Change-Id: I2fb25734b5778b44f2ff6d2ce331a8e2146e20b0
Previously, VFS would use various subsets of a number of fproc
structure fields to store state when the process is blocked
(suspended) for various reasons. As a result, there was a fair
amount of abuse of fields, hidden state, and confusion as to
which fields were used with which suspension states.
Instead, the suspension state is now split into per-state
structures, which are then stored in a union. Each of the union's
structures should be accessed only right before, during, and right
after the fp_blocked_on field is set to the corresponding blocking
type. As a result, it is now very clear which fields are in use
at which times, and we even save a bit of memory as a side effect.
Change-Id: I5c24e353b6cb0c32eb41c70f89c5cfb23f6c93df
Any attempt to use open(2) to open a socket file now fails with
EOPNOTSUPP, as is common and in the process of being standardized.
The behavior and error code is now tested in test56.
Any attempt to open a file of which the type is not known to VFS
(e.g., as a result of bogus file system contents) now fails with EIO.
For now, this is a safety feature, to prevent VFS tripping over such
types in unchecked cases. In the future, a proper VFS code audit
should determine whether we can lift this restriction again, although
it does not seem particularly useful to be able to open files of
unknown types anyway. Another error code may be assigned to this case
later, too.
Change-Id: Ib4cb4341eec954f0448fe469ecf28bd78edebde2
By now it has become clear that the VFS select code has an unusually
high concentration of bugs, and there is no indication that any form
of convergence to a bug-free state is in sight. Thus, for now, it
may be helpful to be able to dump the contents of the select tables
in order to track down any bugs in the future. Hopefully that will
allow the next bugs to be resolved slightly after than before.
The debug dump can be triggered with "svrctl vfs get print_select".
Change-Id: Ia826746dce0f065d7f3b46aa9047945067b8263d
A select query could deadlock if..
- it was querying a character or socket device that, at the start of
the select query, was not known to be ready for the requested
operations;
- this device could not be checked immediately, due to another ongoing
query to the same character or socket driver;
- the select query had a timer that triggered before the device could
be checked, thereby changing the select query to non-blocking.
In this situation, a missing flag check would cause the select code to
conclude erroneously that the operations which it flagged for later,
were satisfied. At the same time, the same flag remained set, so that
the select query would continue to wait for that device. This
resulted in a deadlock. The same bug could most likely be triggered
through other scenarios that were even less likely to occur.
This patch fixes the race condition and puts in a hopefully slightly
more informative comment for the affected block of code.
In practice, the bug could be triggered fairly reliably by generating
lots of output in tmux.
Change-Id: I1c909255dcf552e6c7cef08b0cf5cbc41294b99c
Now that clock_t is an unsigned value, we can also allow the system
uptime to wrap. Essentially, instead of using (a <= b) to see if time
a occurs no later than time b, we use (b - a <= CLOCK_MAX / 2). The
latter value does not exist, so instead we add TMRDIFF_MAX for that
purpose.
We must therefore also avoid using values like 0 and LONG_MAX as
special values for absolute times. This patch extends the libtimers
interface so that it no longer uses 0 to indicate "no timeout".
Similarly, TMR_NEVER is now used as special value only when
otherwise a relative time difference would be used. A minix_timer
structure is now considered in use when it has a watchdog function set,
rather than when the absolute expiry time is not TMR_NEVER. A few new
macros in <minix/timers.h> help with timer comparison and obtaining
properties from a minix_timer structure.
This patch also eliminates the union of timer arguments, instead using
the only union element that is only used (the integer). This prevents
potential problems with e.g. live update. The watchdog function
prototype is changed to pass in the argument value rather than a
pointer to the timer structure, since obtaining the argument value was
the only current use of the timer structure anyway. The result is a
somewhat friendlier timers API.
The VFS select code required a few more invasive changes to restrict
the timer value to the new maximum, effectively matching the timer
code in PM. As a side effect, select(2) has been changed to reject
invalid timeout values. That required a change to the test set, which
relied on the previous, erroneous behavior.
Finally, while we're rewriting significant chunks of the timer code
anyway, also covert it to KNF and add a few more explanatory comments.
Change-Id: Id43165c3fbb140b32b90be2cca7f68dd646ea72e
This is necessary to enable correct compilation of the tools version
of installboot_nbsd(8)when cross-compiling on a system close enough
to MINIX, like NetBSD 7.0.1 for example.
Change-Id: I7a12614518293e05d64d7cc189c62651fdc64734
Aditionally this removes all trailing whitespaces in pm server code
using: sed -i 's/[[:space:]]*$//' *.c
Change-Id: Ie44162fd56cd7042f4f0cc7bd7314b17ea128761
At a point not too far in the future, we will be switching from the
hardcoded MINIX3 implementation of the getifaddrs(3) libc routine to
the proper NetBSD implementation. The latter uses the
net.route.rtable sysctl functionality to obtain its information. In
order make the transition as painless as possible, this patch adds
basic support for that net.route.rtable functionality to INET and
LWIP, using the remote MIB (RMIB) facility.
Change-Id: I54f5cea7985f6606e317c73a5e6be3a5d07bc7dc
With this patch, the IPC service is changed to use the new RMIB
facility to register and handle the "kern.ipc" sysctl subtree itself.
The subtree was previously handled by the MIB service directly. This
change improves locality of handling: especially the
kern.ipc.sysvipc_info node has some peculiarities specific to the IPC
service and is therefore better handled there. Also, since the IPC
service is essentially optional to the system, this rearrangement
yields a cleaner situation when the IPC service is not running: in
that case, the MIB service will expose a few basic kern.ipc nodes
indicating that no SysV IPC facilities are present. Those nodes will
be overridden through RMIB when the IPC service is running.
It should be easier to add the remaining (from NetBSD) kern.ipc nodes
as well now.
Test88 is extended with a new subtest that verifies that sysctl-based
information retrieval for semaphore sets works as expected.
Change-Id: I6b7730e85305b64cfd8418c0cc56bde64b22c584
Most of the nodes in the general sysctl tree will be managed directly
by the MIB service, which obtains the necessary information as needed.
However, in certain cases, it makes more sense to let another service
manage a part of the sysctl tree itself, in order to avoid replicating
part of that other service in the MIB service. This patch adds the
basic support for such delegation: remote services may now register
their own subtrees within the full sysctl tree with the MIB service,
which will then forward any sysctl(2) requests on such subtrees to the
remote services.
The system works much like mounting a file system, but in addition to
support for shadowing an existing node, the MIB service also supports
creating temporary mount point nodes. Each have their own use cases.
A remote "kern.ipc" would use the former, because even when such a
subtree were not mounted, userland would still expect some of its
children to exist and return default values. A remote "net.inet"
would use the latter, as there is no reason to precreate nodes for all
possible supported networking protocols in the MIB "net" subtree.
A standard remote MIB (RMIB) implementation is provided for services
that wish to make use of this functionality. It is essentially a
simplified and somewhat more lightweight version of the MIB service's
internals, and works more or less the same from a programmer's point
of view. The most important difference is the "rmib" prefix instead
of the "mib" prefix. Documentation will hopefully follow later.
Overall, the RMIB functionality should not be used lightly, for
several reasons. First, despite being more lightweight than the MIB
service, the RMIB module still adds substantially to the code
footprint of the containing service. Second, the RMIB protocol not
only adds extra IPC for sysctl(2), but has also not been optimized for
performance in other ways. Third, and most importantly, the RMIB
implementation also several limitations. The main limitation is that
remote MIB subtrees must be fully static. Not only may the user not
create or destroy nodes, the service itself may not either, as this
would clash with the simplified remote node versioning system and
the cached subtree root node child counts. Other limitations exist,
such as the fact that the root of a remote subtree may only be a
node-type node, and a stricter limit on the highest node identifier
of any child in this subtree root (currently 4095).
The current implementation was born out of necessity, and therefore
it leaves several improvements to future work. Most importantly,
support for exit and crash notification is missing, primarily in the
MIB service. This means that remote subtrees may not be cleaned up
immediately, but instead only when the MIB service attempts to talk
to the dead remote service. In addition, if the MIB service itself
crashes, re-registration of remote subtrees is currently left up to
the individual RMIB users. Finally, the MIB service uses synchronous
(sendrec-based) calls to the remote services, which while convenient
may cause cascading service hangs. The underlying protocol is ready
for conversion to an asynchronous implementation already, though.
A new test set, testrmib.sh, tests the basic RMIB functionality. To
this end it uses a test service, rmibtest, and also reuses part of
the existing test87 MIB service test.
Change-Id: I3378fe04f2e090ab231705bde7e13d6289a9183e
Instead, filter it in libc for old networking implementations, as
those do not support sending SIGPIPE to user processes anyway. This
change allows newer socket drivers to implement the flag as per the
specification.
Change-Id: I423bdf28ca60f024a344d0a73e2eab38f1b269da
We do not support any PF functionality, nor do we intend to. However,
some NetBSD utilities rely on the presence of these files. Not all of
the files are installed. The NetBSD source seems rather inconsistent
in where from to include these files. We simply follow what NetBSD
does, though.
Change-Id: Ib244dfcc60b16ebc4697af22f71b7e014374b855
While still a small subset of the NetBSD headers, this set should
allow various additional utilities to be compiled without too many
MINIX3-specific changes (even if those utilities will not yet work).
Change-Id: Idc70e9901d584e960cd406f75f561dcc9a4ddb7d
While MFS failing to do I/O on a block is generally fatal, reading
the superblock at mount time is an exception: this case may occur
when the given partition is too small to contain the superblock.
Therefore, MFS should not crash or even report anything in this
case, but rather refuse to mount cleanly.
This fixes#121.
Change-Id: I11326b48922a0e0ebefecbb8eec7c428f985f2b3
Transparent (endpoint-preserving) restarts with identity transfer
are meant to exercise the crash recovery system only. After *real*
crashes, such restarts are useless at best and dangerous at worst,
because no state integrity can be guaranteed afterwards. Thus,
except after a controlled crash, it is best not to perform such
restarts at all. This patch changes SEF such that identity transfer
is successful only if the old process was the subject of a crash
induced through "service fi". As a result, testrelpol.sh should
continue to be able to use identity transfers for testing purposes,
but any real crash will be handled more appropriately.
This fixes#126.
Change-Id: Idc17ac7b3dfee05098529cb889ac835a0cd03ef0
The new asserts from git-29e004d exposed an issue in how VFS handles
aborting file system (FS) requests that are queued for a FS (as
opposed to sent to it) when that FS crashes. In that scenario, the
queued worker has its w_task set to NONE, because there is no ongoing
communication. However, worker_stop() is called on it regardless,
which used to abort the request only if w_task was not set to NONE,
leading to an improperly aborted request, a warning, and a VFS crash a
bit later. This patch changes worker_stop() so that w_task need not
be set to a valid endpoint for FS requests to be properly aborted.
Change-Id: Ib73db285e689ae4742b15cba26137bf340bc303b
Scripts for generating boot-to-ramdisk images are now available. These
can be used for example to boot from PXE or from a USB stick, as the
ramdisk are self-contained and do not rely on any block devices after
being loaded into RAM.
The image generation framework has also been slightly cleaned up in
order to better accomodate tarball sets bundling in images.
Change-Id: I65a176832bd0d6954b430fa8305f90af0bd606c1
This reverts commit 22ad44d6a9fa80d47806bf1897394569b6c15b8a.
With the MIB service implemented, this hack is no longer necessary.
Change-Id: Ic969c2dcecd6fc9ce283d1dda6518796869875e3
Some functions in lib/libc/net were disabled on MINIX3 only, but with
a few added header files they build just fine, even though some of
them rely on system functionality that has not yet been implemented.
Since the functionality is unlikely to be used in practice (because
it typically requires the use of protocol families that themselves are
not yet supported, such as IPv6), already enabling it right now helps
in building packages that rely on the functionality being present at
compile time, while not posing any practical risk of breaking the same
packages at run time.
Change-Id: Idee8e3963c9e300bde9575429f0e77b0565acaef
This patch aims to synchronize the basic process user and group ID
management, as well as the set[ug]id(2) and sete[ug]id(2) behavior,
with NetBSD. As it turns out, the main issue was missing support for
saved user and group IDs. This support is now added.
Since NetBSD's userland, which we are importing, may rely on NetBSD
specifics when it comes to security, we choose not to deviate from
NetBSD's behavior in any way here. A new test, test89, verifies the
correct behavior - it has been confirmed to pass on NetBSD as is.
Change-Id: I023935546d97ed01ffd8090f7793d336cceb0f4a
Commit git-c38dbb9 inadvertently broke local MINIX3-on-MINIX3 builds,
since its libc changes relied on VFS being upgraded already as well.
As a result, after installing the new libc, networking ceased to work,
leading to curl(1) failing later on in the build process. This patch
introduces transitional code that is necessary for the build process
to complete, after which it is obsolete again.
Change-Id: I93bf29c01d228e3d7efc7b01befeff682954f54d
