The st_blocks field should count 512-byte units, not file system
block units. The previous computation would cause utilities such
as du(1), when used on isofs, to be off by a factor four.
Change-Id: If47c234079d19bd5b41f35a97780667efd822509
This omission would cause the test set to hang, at least, if the
old /bin/service was indeed deleted.
Change-Id: I9423ecc77a4bf778973de81a49300748ce8c3dfd
A pair of manual pages were already present in /usr/share/man, but
not yet installed. Install them as well. Lots and lots more from
NetBSD's set of manual pages should be imported, though.
Change-Id: Ie2e8946967afcb2e71de563f06fa331586dcb31d
In order to comply with the pkgsrc standards, pkgsrc packages are no
longer auto-started. Instead, we require that users follow the common
pkgsrc procedure: to start a pkgsrc package as part of system startup,
copy its startup script from /usr/pkg/etc/rc.d to /etc/rc.d, and make
the appropriate changes to /etc/rc.conf.
This change affects in particular the openssh package, of which its
ssh daemon is no longer auto-started. However, installing this
package also no longer causes all kinds of Kerberos-related warnings
to be reported at boot time now.
Also remove a leftover reference to the defunct ddekit usb package.
Change-Id: I4d42f6ca1ab5e3bc2ec296bc7c0e3056964ae451
IMPORTANT: this change has a docs/UPDATING entry!
This patch performs an initial import of the infrastructure and a
subset of the NetBSD set of rc startup and shutdown scripts. The
"initial" refers to the fact that this is not yet a full switch to the
NetBSD rc system: the MINIX ramdisk rc script, which (typically) runs
as the first thing, is kept as is. After mounting the root file
system, the ramdisk rc script will start the NetBSD rc infrastructure
by invoking /etc/rc, however. The regular MINIX startup-and-shutdown
script has been moved from /etc/rc to /etc/rc.minix, and is now
invoked as part of the NetBSD rc infrastructure through a bridge rc
script /etc/rc.d/minixrc. /etc/rc.minix invokes /usr/etc/rc as before.
Switching over the ramdisk to the NetBSD system and decomposing the
MINIX rc.minix script into smaller components are left to future work.
Also, the current pkgsrc etc/rc.d auto-start functionality is left as
is, even though it should be removed (see the etc/usr/rc comment).
Change-Id: Ia96cae7c426e94b85c67978dc1307dacc4b09fc5
After processing certain asynchronous requests from VFS, VM would send
an asynchronous reply without supplying the AMF_NOREPLY flag. As a
result, this asynchronous reply could be taken as the result of an
ipc_sendrec() call, causing the entire VM/VFS communication to become
desynchronized. The end result was a deadlock-induced panic during a
later request.
This bug was exposed because of the higher-than-usual concurrency
level in the NetBSD rc scripts. The fix consists of properly setting
the AMF_NOREPLY flag for asynchronous replies.
Change-Id: Iafafe2fdd67f212ecbf27a53862cefba2e4cf7e8
Performing the update at any later time may cause rc scripts to work
with a wrong date, which may have side effects, such as databse files
getting regenerated on every boot.
Change-Id: Idfdbf67ad285300c982d95769007dc88c522b908
This requires importing a few files from mail(1) already. Importing
the rest of mail(1) is left to future work.
Change-Id: If96513a306245cd7fb64660758d0dbd29a36e87c
IMPORTANT: this change has a docs/UPDATING entry!
This rename is unfortunately necessary because NetBSD has decided to
create its own service(8) utility, and we will want to import theirs
as well. The two can obviously not coexist.
Also move ours from /bin to /sbin, as it is a superuser-only utility.
Change-Id: Ic6e46ffb3a84b4747d2fdcb0d74e62dbea065039
IMPORTANT: this change has a docs/UPDATING entry!
This change is a long overdue switch-over from the old MINIX set of
user and group accounts to the NetBSD set. This switch-over is
increasingly important now that we are importing more and more
utilities from NetBSD, several of which expect various user accounts
to exist. By switching over in one go, we save ourselves various
headaches in the long run, even if the switch-over itself is a bit
painful for existing MINIX users.
The newly imported master.passwd and group files have three exceptions
compared to their NetBSD originals:
1. There is a custom "service" account for MINIX 3 services. This
account is used to limit run-time privileges of various system
services, and is not used for any files on disk. Its user ID may
be changed later, but should always correspond to whatever the
SERVICE_UID definition is set to.
2. The user "bin" has its shell set to /bin/sh, instead of NetBSD's
/sbin/nologin. The reason for this is that the test set in
/usr/tests/minix-posix will not be able to run otherwise.
3. The group "operator" has been set to group ID 0, to match its old
value. This tweak is purely for transitioning purposes: as of
writing, pkgsrc packages are still using root:operator as owner and
group for most installed files. Sometime later, we can change back
"operator" to group ID 5 without breaking anything, because it does
not appear that this group name is used for anything important.
Change-Id: I689bcfff4cf7ba85c27d1ae579057fa3f8019c68
This small change makes it easier to do sorts without having to deal
with these entries over and over again.
Change-Id: Id5077a17733fa4b535cdc9881109286335d3cb17
In order to allow for proper matching of available drivers to system
hardware, the output of this utility should reflect the full details
of the input from configuration files. In particular, that includes
sub-IDs of PCI devices when those have been specified.
Change-Id: Iea24d72795cd714268dbdb95df998eb74de8f2bd
This was a MINIX3-specific header file placed outside of the minix/
header subdirectory, with its definitions duplicated in the more
standard minix/sysutil.h header.
Also make env_prefix(3) take constant pointers.
Change-Id: I243c38eb38e24eb98f0c0dddf7f340e7fec255f4
Site-local addresses are out, as they are RFC-deprecated and not
supported on MINIX 3 at all. Interface-local and link-local multicast
addresses are in, because they are relevant in the context of a
particular zone ID only.
Change-Id: I64a9ecb472946f717f27a72c4073d78aa1120508
- POLLRDBAND is reported by select(2) as errorfd, not readfd;
- POLLERR is not the same as errorfd of select(2);
- flags that are not requested should not be returned.
Change-Id: I9cb3c2c260ead5a2852a2fbbc10280c2b5b0dff9
Without this file, the NetBSD userland will fall back by default to the
old, insecure classic UNIX password hashing algorithm.
This is a big security issue. Please check docs/UPDATING for details.
Change-Id: Ib85646ee4678f91384bab238426ee55ff26da011
The callback, which was dropped in commit git-842c4ed, allows drivers
to fetch the interrupt status once and save it locally for subsequent
calls to drv_int().
This fixes#190 .
Change-Id: I83918656f637e716f60e9f4c19f1498f761d3b52
This patch adds strace-like support for a -t command line option,
which causes a timestamp to be printed at the beginning of each line.
If the option is given more than once, the output will also include
microseconds.
Change-Id: I8cda581651859448c154b01815cc49d915b7b354
A small fix to allow this test to be run from its original source
directory location, in addition to its installed location.
Change-Id: I4b7afed14ba02b1bea8d9c5f65bc96698a279188
This is a fix over commit a150b26ee803b20080
On a MINIX station, the tools are not usually built and
on a first-time building of the tree, the fetching script
of texinfo was not triggered in some cases. Let force it.
Reported on minix3 googlegroup by Chris Card.
Change-Id: I8beafdeaec66bb1f1f3250bd64c1e14c0023e9d0
As of change git-87c599d, when processing CLOCK notifications, PM no
longer set the current process pointer 'mp'. That pointer is however
used when delivering signals through check_sig(), to see whether the
current process may deliver a signal to the target process. As a
result, delivering SIGALARM signals used a previous pointer in these
checks, causing alarm signals not to be delivered in some cases.
This patch ensures that alarm signals are again delivered with PM as
current process.
Change-Id: I94ccbe8b71289df0e1d6d67928e55297bbc28360
